LAISHA
Open Laisha

MSc Food Technology (admission)

Netherlands · Wageningen University & Research

8practice questions written to this syllabus
3subjects

What MSc Food Technology is

MSc Food Technology (admission) is a postgraduate admission exam run by Wageningen University & Research, for candidates in Netherlands.

Format

Admission on file: a relevant BSc with food chemistry, engineering, microbiology and physics, mathematics and statistics; no entrance exam.

How it has changed

Programme page read 3 Oct 2026. It names 'Dairy Science & Technology' as an example of a degree whose graduates may meet the knowledge requirements. Admission manual: https://backend.wur.nl/sites/default/files/2026-09/admission-manual-MFS-MFQ-MFT-EN-2026.pdf.

How to prepare for MSc Food Technology

Where our 8 questions for it fall

Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.

  1. Heaviest (75% of the questions): Dairy Colloids: Emulsions, Foams & Gels (6).

    Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.

  2. Middle band: Emerging & Non-thermal Dairy Processing (1).

    One pass per subject, then mixed sets across them.

  3. Lighter: Advanced Dairy Chemistry (1).

    Definitions, classifications and standard figures; quick to revise, easy marks to lose.

  4. Hardest share: Dairy Colloids: Emulsions, Foams & Gels (3 hard of 6).

    Leave untimed time for these and read every explanation, including for the options you rejected.

Official source: wur.nl

8 practice questions, worked

Original questions written to this exam's published syllabus and pattern. Not past papers.

1. What is orogenic displacement?

  1. Casein micelles displacing native milk fat globule membrane during separation
  2. Small surfactant domains grow at an interface and compress protein until it is pushed off
  3. Chymosin removing the caseinomacropeptide from the micelle surface
  4. Proteins at an interface pushing small surfactants back into micelles in the bulk solution
Answer and working

B. Small surfactant domains grow at an interface and compress protein until it is pushed off

Because small surfactants lower γ more, they win the interface progressively. This is exploited in ice cream, where emulsifiers displace casein from globule surfaces during ageing.

Dairy Colloids: Emulsions, Foams & Gels · Interfacial science and surfactants

2. Why is high pressure used for donor human milk in some milk banks?

  1. It removes all fat to make the milk easier to store
  2. It sterilises the milk so that no cold chain is ever needed
  3. It keeps more IgA, lactoferrin and lipase than Holder pasteurisation
  4. It adds vitamin D and iron to the donor milk
Answer and working

C. It keeps more IgA, lactoferrin and lipase than Holder pasteurisation

Holder pasteurisation (62.5 °C, 30 min) damages these bioactives more.

Emerging & Non-thermal Dairy Processing · High pressure processing

3. Why can a non-adsorbing polysaccharide added to milk cause the casein micelles to flocculate?

  1. It binds covalently to κ-casein and bridges micelles into large aggregates
  2. It hydrolyses κ-casein in the same way as chymosin does
  3. Excluded polymer creates an osmotic push between close particles
  4. It raises the pH above 8, which destroys the micelle charge
Answer and working

C. Excluded polymer creates an osmotic push between close particles

This is depletion flocculation: polymer-free zones between close particles create an osmotic imbalance. Bridging needs adsorption, which by definition is absent here.

Dairy Colloids: Emulsions, Foams & Gels · Colloidal state of milk and colloid stability

4. What distinguishes a microemulsion from a nanoemulsion?

  1. A microemulsion contains no surfactant at all
  2. A nanoemulsion forms spontaneously and needs no energy or surfactant
  3. Only the microemulsion is thermodynamically stable
  4. A microemulsion has larger droplets, always above 10 µm
Answer and working

C. Only the microemulsion is thermodynamically stable

Microemulsions form spontaneously within a composition range and do not break down; nanoemulsions need energy input and eventually destabilise.

Dairy Colloids: Emulsions, Foams & Gels · Organogels, hydrogels and nanoemulsions

5. Which mechanisms mainly break fat globules in a high-pressure valve homogeniser?

  1. Gravity separation of the fat in the homogeniser's holding tube
  2. Turbulence and cavitation at the valve gap
  3. Freezing and thawing of the fat during rapid decompression
  4. Enzymatic hydrolysis of the triglycerides by heat-activated lipase
Answer and working

B. Turbulence and cavitation at the valve gap

Inertial forces from turbulent eddies of about globule size, plus cavitation shock waves, disrupt globules; laminar shear contributes less.

Dairy Colloids: Emulsions, Foams & Gels · Emulsion formation, homogenisation and stability

6. What does Bancroft's rule state?

  1. The phase with the larger volume always becomes the dispersed phase
  2. The emulsifier with the lowest HLB always gives an oil-in-water emulsion
  3. The interfacial tension must exceed 50 mN/m before an emulsion forms
  4. The phase in which the emulsifier is more soluble tends to be continuous
Answer and working

D. The phase in which the emulsifier is more soluble tends to be continuous

A water-soluble emulsifier favours O/W; an oil-soluble one favours W/O. Phase volume matters but does not override this.

Dairy Colloids: Emulsions, Foams & Gels · Emulsifiers and the HLB concept

7. On Labuza's food stability map, lipid oxidation is minimal near:

  1. aw = 0.99
  2. The monolayer moisture content
  3. aw = 0.7
  4. aw = 0.5 only for proteins
Answer and working

B. The monolayer moisture content

Very dry systems oxidise faster; water near the monolayer protects; oxidation rises again at higher aw.

Advanced Dairy Chemistry · Water activity, glass transition and state diagrams

8. An acid milk drink with too little pectin sediments. What mechanism is likely?

  1. Bridging flocculation: one pectin chain adsorbs to two or more particles
  2. Depletion flocculation caused by a large excess of free, non-adsorbed pectin
  3. Ostwald ripening of the casein particles
  4. Complete dissolution of the casein at low pH
Answer and working

A. Bridging flocculation: one pectin chain adsorbs to two or more particles

Insufficient pectin cannot cover each particle, so chains bridge particles; excess free pectin, by contrast, can cause depletion flocculation.

Dairy Colloids: Emulsions, Foams & Gels · Hydrocolloid stabilisers and protein-polysaccharide interactions

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock all 8 questions — MSc Food Technology (admission)

US$10 a month · one price worldwide · cancel any time

  • Every practice question for this course, with explanations
  • Timed papers for the exams this course leads to
  • Ask Laisha to explain any topic — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.