LAISHA
Open Laisha

ASPRS Certified Mapping Scientist / Photogrammetrist (Remote Sensing, Lidar)

USA · American Society for Photogrammetry and Remote Sensing · unverified source

27practice questions written to this syllabus
2subjects

What ASPRS Certified Mapping Scientist / Photogrammetrist is

ASPRS Certified Mapping Scientist / Photogrammetrist (Remote Sensing, Lidar) is a professional certification run by American Society for Photogrammetry and Remote Sensing, for candidates in USA.

Format

Experience review and written exam by specialty (remote sensing, lidar, photogrammetry, GIS/LIS).

Sections

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose.

Check the current format, eligibility, fees and dates on the official site: asprs.org.

How it has changed

A recognised credential for forest remote-sensing and LiDAR specialists.

How to prepare for ASPRS Certified Mapping Scientist / Photogrammetrist

Where our 27 questions for it fall

Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.

  1. Heaviest (56% of the questions): Remote Sensing & Photogrammetry for Forestry (15).

    Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.

  2. Middle band: Forest GIS, GNSS & LiDAR Analytics (12).

    One pass per subject, then mixed sets across them.

  3. Hardest share: Remote Sensing & Photogrammetry for Forestry (11 hard of 15), Forest GIS, GNSS & LiDAR Analytics (3 hard of 12).

    Leave untimed time for these and read every explanation, including for the options you rejected.

Official source: asprs.org

8 practice questions, worked

Original questions written to this exam's published syllabus and pattern. Not past papers.

1. With NIR = 0.45, red = 0.05 and L = 0.5, SAVI = (NIR − red) × (1 + L) ÷ (NIR + red + L) is:

  1. 0.80
  2. 0.40
  3. 0.60
  4. 1.20
Answer and working

C. 0.60

SAVI = 0.40 × 1.5 ÷ 1.00 = 0.60; omitting the (1 + L) factor gives 0.40.

Remote Sensing & Photogrammetry for Forestry · Vegetation indices (NDVI and others)

2. Radar backscatter 'saturation' with biomass means that:

  1. Backscatter falls to zero in dense forest
  2. Above a level, more biomass adds little backscatter
  3. Radar cannot detect any trees at all
  4. The sensor stops recording above a temperature
Answer and working

B. Above a level, more biomass adds little backscatter

C-band saturates at low biomass; L-band at roughly 100–150 t/ha.

Remote Sensing & Photogrammetry for Forestry · Radar (SAR) in forestry

3. A pushbroom sensor differs from a whiskbroom scanner in that it:

  1. Sweeps a mirror across the track
  2. Images a whole line at once
  3. Records only a single spectral band
  4. Needs radar
Answer and working

B. Images a whole line at once

A line of detectors gives a longer dwell time per pixel and better signal.

Remote Sensing & Photogrammetry for Forestry · Satellite sensors and resolutions: spatial, spectral, temporal, radiometric

4. A scanner with a beam divergence of 0.3 mrad flies 1,500 m above the canopy. The footprint diameter is about:

  1. 0.45 m
  2. 4.5 m
  3. 0.045 m
  4. 0.9 m
Answer and working

A. 0.45 m

Footprint ≈ 0.3 × 10⁻³ × 1,500 = 0.45 m. 4.5 and 0.045 are factor-of-ten slips in milliradians.

Forest GIS, GNSS & LiDAR Analytics · Airborne LiDAR: point clouds, canopy height models

5. Interferometric SAR (InSAR) measures surface height from:

  1. Brightness of a single image
  2. Shadow length at noon
  3. Thermal emission
  4. Phase differences between two images
Answer and working

D. Phase differences between two images

TanDEM-X produced a global elevation model; InSAR height minus terrain gives canopy height.

Remote Sensing & Photogrammetry for Forestry · Radar (SAR) in forestry

6. The horizontal errors of four GNSS check points are 1, 2, 2 and 3 m. What is the RMSE?

  1. 2.00 m
  2. 2.12 m
  3. 4.50 m
  4. 1.50 m
Answer and working

B. 2.12 m

RMSE = √((1 + 4 + 4 + 9) ÷ 4) = √4.5 = 2.12 m. 2.00 is the mean error; 4.50 is the mean squared error before the square root.

Forest GIS, GNSS & LiDAR Analytics · GNSS data collection and accuracy

7. In the ASPRS LAS standard, which classification code is assigned to ground points?

  1. 1
  2. 5
  3. 6
  4. 2
Answer and working

D. 2

Class 2 is ground; 1 is unclassified; 3–5 are low, medium and high vegetation; 6 is building.

Forest GIS, GNSS & LiDAR Analytics · Airborne LiDAR: point clouds, canopy height models

8. A drone camera has a 2.4 µm pixel and an 8.8 mm lens. Using GSD = pixel size × flying height ÷ focal length, the GSD at 100 m above ground is:

  1. 2.7 cm
  2. 27 cm
  3. 0.27 cm
  4. 37 cm
Answer and working

A. 2.7 cm

GSD = 0.0000024 × 100 ÷ 0.0088 = 0.0273 m ≈ 2.7 cm.

Remote Sensing & Photogrammetry for Forestry · Drones (UAVs) for forest survey

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock all 27 questions — ASPRS Certified Mapping Scientist / Photogrammetrist (Remote Sensing, Lidar)

US$10 a month · one price worldwide · cancel any time

  • Every practice question for this course, with explanations
  • Timed papers for the exams this course leads to
  • Ask Laisha to explain any topic — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.