LAISHA
Open Laisha

Chainsaw and forest machine competence certificates (NPTC / Lantra)

UK · City & Guilds NPTC and Lantra Awards

9practice questions written to this syllabus
2subjects

What Chainsaw and forest machine competence certificates is

NPTC by City & Guilds runs the UK's best-known certificates of competence for chainsaw, tree work and forestry machinery. They are vocational qualifications assessed in practice: a candidate is trained by a provider, college or employer, then assessed one to one by an independent NPTC City & Guilds approved assessor. The Chainsaw and Related Operations scheme contains seventeen certificates of competence. The usual starting point is the Level 2 Certificate of Competence in Chainsaw Maintenance and Cross-Cutting (0039-20), which covers maintaining a chainsaw and cross-cutting timber at ground level; felling, climbing and aerial work certificates build on it.

Who is eligible

How to register

  1. Choose the certificate you need from the NPTC scheme (for most people, 0039-20 first).
  2. Train with an approved training provider, college or employer; City & Guilds sets 16 guided learning hours for 0039-20 (total qualification time 19 hours).
  3. Register with an approved centre; registration is valid for two years and the assessment must be completed within 24 months of registration.
  4. Take the one-to-one practical assessment with oral questioning, by an approved assessor who must be independent of your training; for 0039-20 it should take 1 to 2 hours.
  5. Progress to further certificates, such as Felling Small Trees up to 380mm (0039-21).

Format

No written exam. Each unit is assessed by practical observation with oral questioning against City & Guilds assessment materials. For 0039-20 the single mandatory unit is 201, Chainsaw maintenance and cross-cutting. The qualification covers risk assessment, emergency planning, legislation, industry best practice and manufacturers' recommendations; maintenance of petrol and battery-powered saws, guide bar and chain, and reassembly of the cutting system; waste disposal, personal protective equipment, biosecurity and environmental considerations; and cross-cutting, moving and stacking timber. Cross-cutting covers timber under low and moderate tension (fallen branches, tops and sections); timber under extreme tension, such as windblown trees, and severing root plates are excluded and covered by separate certificates.

From the exam body's own pages, checked 2026-11-10.

Sections

Fees: Fees are set by the training providers and assessment centres, and were not checked.

How it differs from similar exams

These are practical certificates of competence for operators, assessed by observation and oral questions, unlike professional registrations such as Chartered Forester or Registered Professional Forester, which assess education and professional experience. Each certificate covers one defined activity, so operators collect several as their work widens: the scheme runs from Level 2 maintenance, felling small trees, climbing and aerial rescue, to Level 3 felling of medium and large trees, windblown trees, rigging and emergency tree work planning.

How to prepare for Chainsaw and forest machine competence certificates

Where our 9 questions for it fall

Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.

  1. Heaviest (56% of the questions): Professional Forestry Practice, Ethics & Registration (5).

    Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.

  2. Middle band: Forest Operations, Harvesting & Forest Engineering (4).

    One pass per subject, then mixed sets across them.

Official sources: NPTC by City & Guilds · 0039-20 Chainsaw Maintenance and Cross-Cutting · 0039-20 qualification handbook (PDF). Checked 2026-11-10.

Not confirmed from an official source, so not stated here: Whether, and when, refresher training or reassessment is required depends on the employer and industry guidance; the handbook read does not set a validity period.; Lantra Awards' equivalent chainsaw courses were not read for this guide..

8 practice questions, worked

Original questions written to this exam's published syllabus and pattern. Not past papers.

1. Which is the most effective level in the hierarchy of controls?

  1. Personal protective equipment
  2. Administrative controls
  3. Engineering controls
  4. Elimination
Answer and working

D. Elimination

Elimination removes the hazard; PPE is the last line of defence.

Professional Forestry Practice, Ethics & Registration · Health and safety responsibilities

2. A commonly taught hinge thickness is about:

  1. Half of the stump diameter
  2. One-hundredth of the stump diameter
  3. Equal to the full stump diameter
  4. One-tenth of the stump diameter
Answer and working

D. One-tenth of the stump diameter

Too thin a hinge loses control; too thick a hinge resists falling.

Forest Operations, Harvesting & Forest Engineering · Felling: manual, motor-manual and mechanised; directional felling

3. Which item is part of standard chainsaw personal protective equipment?

  1. Ordinary running shoes
  2. Loose cotton gloves only
  3. A baseball cap
  4. Chainsaw-protective trousers or chaps
Answer and working

D. Chainsaw-protective trousers or chaps

Helmet, eye and hearing protection, protective trousers, boots and gloves are standard.

Professional Forestry Practice, Ethics & Registration · Health and safety responsibilities

4. Kickback occurs when the chain contacts an object at the:

  1. Upper nose of the guide bar
  2. Lower edge of the bar near the engine
  3. Bottom of the chain while cutting downward
  4. Bumper spikes against the trunk
Answer and working

A. Upper nose of the guide bar

The upper quadrant of the nose is the kickback zone.

Forest Operations, Harvesting & Forest Engineering · Chainsaw use and safety

5. Chainsaw protective trousers work by:

  1. Hard steel plates that deflect the chain
  2. Long fibres that clog and stop the chain
  3. Thick leather that the chain cannot cut
  4. Reflective strips that warn others
Answer and working

B. Long fibres that clog and stop the chain

The fibres are pulled into the drive sprocket and jam the chain.

Forest Operations, Harvesting & Forest Engineering · Chainsaw use and safety

6. The chain catcher on a chainsaw:

  1. Catches a broken or derailed chain
  2. Sharpens the chain automatically while cutting
  3. Stops the engine when hot
  4. Holds spare chains
Answer and working

A. Catches a broken or derailed chain

It protects the operator's right hand area.

Forest Operations, Harvesting & Forest Engineering · Chainsaw use and safety

7. On five-point scales, a hazard is rated likely (4) and of major severity (4). Its risk score is:

  1. 16
  2. 8
  3. 20
  4. 25
Answer and working

A. 16

Risk = likelihood × severity = 4 × 4 = 16. 8 adds them; 25 is the maximum.

Professional Forestry Practice, Ethics & Registration · Health and safety responsibilities

8. Replacing manual felling with mechanised felling on steep ground is an example of:

  1. Elimination
  2. Substitution
  3. PPE
  4. Administrative control
Answer and working

B. Substitution

A less hazardous method is substitution.

Professional Forestry Practice, Ethics & Registration · Health and safety responsibilities

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock all 9 questions — Chainsaw and forest machine competence certificates (NPTC / Lantra)

US$10 a month · one price worldwide · cancel any time

  • Every practice question for this course, with explanations
  • Timed papers for the exams this course leads to
  • Ask Laisha to explain any topic — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.