LAISHA
Open Laisha

ASRB NET Factorial Experiments, Confounding, Split- & Strip-Plot Designs: practice questions

ASRB NET - Agricultural Statistics (and Computer Application / Bioinformatics) · India · Agricultural Scientists Recruitment Board (ICAR)

Original practice questions written to the published syllabus · not past papers
10worked here, free
92written to this exam in this subject
11syllabus units

About ASRB NET

ASRB NET - Agricultural Statistics (and Computer Application / Bioinformatics) is a professional certification run by Agricultural Scientists Recruitment Board (ICAR), for candidates in India. NET: one objective paper of about 150 questions, 2 hours, negative marking, online, Master's level (pattern as reported for other disciplines).

Official site: asrb.org.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Factorial Experiments, Confounding, Split- & Strip-Plot Designs in ASRB NET

The same Unit 4 content with applied judgment and numerical items such as Yates' algorithm and split-plot standard errors.

Studying several factors at once: 2^n, 3^n and asymmetrical factorials, main effects and interactions by Yates' method, total and partial confounding, fractional factorials, and the split-plot, split-split-plot and strip-plot layouts that field operations such as irrigation and tillage force on agronomists.

Our 92 ASRB NET questions in this subject: 21 easy, 54 medium, 17 hard, across 11 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ASRB NET and are not shown on any other exam's page.

Question 1 · medium

In a 3 x 4 factorial (A at 3 levels, B at 4) in an RCBD with 3 replications and error mean square MSE, what is the standard error of the difference between two A means?

  1. The square root of (2 MSE / 9)
  2. The square root of (2 MSE / 4)
  3. The square root of (2 MSE / 12)
  4. The square root of (2 MSE / 3)
Answer and working

C. The square root of (2 MSE / 12)

Each A mean is averaged over r x b = 3 x 4 = 12 plots, so SEd = sqrt(2 MSE / 12). The square root of 2 MSE / 3 is for two treatment-combination means; 2 MSE / 9 would be for B means (r x a = 9).

Question 2 · hard

Confounding AB and ABC in a 2^3 in four blocks of two would be a bad choice because:

  1. AB and ABC cannot both be confounded in a 2^3 for any block size
  2. Four blocks of two leave no degrees of freedom for any main effect
  3. Their generalised interaction ABC^2 is confounded with replicates
  4. Their generalised interaction C, a main effect, is also confounded
Answer and working

D. Their generalised interaction C, a main effect, is also confounded

(AB)(ABC) = A^2B^2C = C, so the main effect of C would be lost. Confounded effects should be chosen so that their generalised interactions are high-order.

Question 3 · medium

A significant contrast in a 2^(4-1) (I = ABCD) estimates AC + BD. How can the two effects be separated?

  1. Assume both effects are equal and halve the estimate
  2. Test the contrast against a larger error mean square
  3. Repeat the same half fraction with more replicates
  4. Run the complementary or fold-over fraction
Answer and working

D. Run the complementary or fold-over fraction

Replicating the same fraction keeps AC and BD aliased; running the other half (or a fold-over) breaks the alias. Subject knowledge may also suggest which is plausible.

Question 4 · medium

How are the two factors randomised in a strip-plot design?

  1. Each factor is randomised to its strips independently in every block
  2. Both factors are randomised together over all intersection plots
  3. Each factor occurs once in every row and column of the block
  4. The second factor is randomised within each plot of the first factor
Answer and working

A. Each factor is randomised to its strips independently in every block

Horizontal strips get factor A at random and vertical strips get factor B at random, separately in each block; randomising B within A plots would be a split plot.

Question 5 · medium

A trial crosses four irrigation methods (channels across the block) with three tillage methods (tractor passes along the block). Which design fits?

  1. A completely randomised design over the 12 combinations of plots
  2. A Latin square with irrigation as rows and tillage as columns
  3. A split-plot design with tillage randomised inside each irrigation plot
  4. A strip-plot design with irrigation and tillage in perpendicular strips
Answer and working

D. A strip-plot design with irrigation and tillage in perpendicular strips

Both factors need to run the full length or width of the block, which is the strip-plot situation.

Question 6 · medium

A 3 x 3 factorial plus one control is in an RCBD. How are the 9 treatment degrees of freedom split?

  1. Control vs rest 2, A 2, B 2, A x B 3
  2. A 3, B 3, A x B 3, with the control in A
  3. Control vs rest 1, A 3, B 3, A x B 2
  4. Control vs rest 1, A 2, B 2, A x B 4
Answer and working

D. Control vs rest 1, A 2, B 2, A x B 4

Ten treatments give 9 df: one for control versus the nine factorial combinations and 8 for the 3 x 3 factorial (2 + 2 + 4).

Question 7 · hard

A 2 x 2 factorial plus one control in an RCBD with 4 replications: how many error degrees of freedom are there?

  1. 15
  2. 16
  3. 12
  4. 9
Answer and working

C. 12

Five treatments and 4 blocks: error df = (4 - 1)(5 - 1) = 12. 9 would be the 2 x 2 alone.

Question 8 · easy

In a crossover design, each experimental unit:

  1. Receives all treatments at once on different parts of its body
  2. Receives a sequence of different treatments in successive periods
  3. Receives one treatment for the whole trial, chosen at random
  4. Receives the same treatment repeatedly in every period of the trial
Answer and working

B. Receives a sequence of different treatments in successive periods

Treatments are compared within units over periods, which removes between-animal variation from comparisons.

Question 9 · medium

Why are crossover designs efficient in animal experiments?

  1. They avoid the need for any randomisation of treatment order
  2. Between-animal variation is removed from treatment comparisons
  3. Each animal needs to be measured only once during the trial
  4. They allow carry-over effects to be ignored in the analysis
Answer and working

B. Between-animal variation is removed from treatment comparisons

Each animal serves as its own control, so large differences between animals do not enter the error; this is why fewer animals are needed.

Question 10 · easy

A factorial set of treatments can be laid out in which designs?

  1. Only a Latin square design
  2. Any basic design: CRD, RCBD or Latin square
  3. Only a split-plot design
  4. Only a completely randomised design
Answer and working

B. Any basic design: CRD, RCBD or Latin square

A factorial is a treatment structure; the combinations are arranged in whatever design suits the experimental material.

A study plan for Factorial Experiments, Confounding, Split- & Strip-Plot Designs in ASRB NET

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (46% of the 92 questions): Factorial experiments: main effects and interactions (11, 12%); Split-plot designs and their error terms (11, 12%); 2^n factorials and Yates' algorithm (10, 11%); Total and partial confounding (10, 11%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Crossover (changeover) designs (9, 10%); Fractional factorials and aliasing (9, 10%); 3^n factorials (7, 8%); Strip-plot (split-block) designs (7, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Asymmetrical factorials (6, 7%); Factorials with extra (control) treatments (6, 7%); Split-split-plot designs (6, 7%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Factorials with extra (control) treatments (2 hard of 6), Total and partial confounding (3 hard of 10), 3^n factorials (2 hard of 7).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Factorial experiments: main effects and interactions (4 easy of 11); Crossover (changeover) designs (3 easy of 9).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ASRB NET Factorial Experiments, Confounding, Split- & Strip-Plot Designs

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.