ICAR AICE-JRF/SRF Survey Design, Questionnaires, Field Operations & Non-Sampling Errors: practice questions
ICAR AICE-JRF/SRF - Agricultural Statistics, Computer Application, Bioinformatics (PhD admission and fellowship) · India · National Testing Agency for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
77written to this exam in this subject
11syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF - Agricultural Statistics, Computer Application, Bioinformatics (PhD admission and fellowship) is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. Computer-based test, 2 hours, 120 MCQs, +4 / -1 (Part A general, Part B core group, Part C subject). 2026 exam held with AIEEA-PG in July 2026.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Survey Design, Questionnaires, Field Operations & Non-Sampling Errors in ICAR AICE-JRF/SRF
Unit 5 sampling: non-sampling errors, design and organisation of pilot and large-scale surveys, interpenetrating sub-samples.
Turning a sampling design into data: pilot surveys, questionnaire and schedule design, enumerator training and supervision, CAPI and digital data capture, total survey error, non-sampling error models and post-enumeration checks, as used in large-scale agricultural and household surveys.
Our 77 ICAR AICE-JRF/SRF questions in this subject: 12 easy, 44 medium, 21 hard, across 11 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · medium
An SRS calculation gives n0 = 400. With design effect 1.5 and expected response rate 80%, what sample should be drawn (n = n0 x deff / response rate)?
600
500
480
750
Answer and working
D. 750
n = 400 x 1.5 / 0.8 = 750.
Question 2 · medium
An SRS calculation gives n0 = 400. With design effect 1.5 and expected response rate 80%, what sample should be drawn (n = n0 x deff / response rate)?
600
500
480
750
Answer and working
D. 750
n = 400 x 1.5 / 0.8 = 750.
Question 3 · medium
How does bounded recall reduce telescoping?
A previous interview marks the period's start
Interviewers are rotated between villages
Respondents keep diaries for a full year
Questions are asked only about last week
Answer and working
A. A previous interview marks the period's start
Neter and Waksberg showed bounding reduces telescoping.
Question 4 · medium
Why is a survey's sample often split into sub-rounds?
To raise the interviewer design effect
To avoid training the investigators
To spread seasonal variation evenly
To reduce the number of tables
Answer and working
C. To spread seasonal variation evenly
Each sub-round covers a part of the year with a random part of the sample.
Question 5 · medium
Which risk is greater with CAPI than with paper?
Illegible handwriting on schedules
Separate data-entry errors at headquarters
One programming error affects all interviews
Skip patterns followed wrongly by hand
Answer and working
C. One programming error affects all interviews
Instruments must be tested and version-controlled.
Question 6 · hard
What can interpenetrating sub-samples NOT detect?
A bias common to all investigators
Total variance of the estimate
Variable errors of the investigators
Differences between investigator teams
Answer and working
A. A bias common to all investigators
A shared bias shifts every sub-sample equally.
Question 7 · medium
An estimator has bias 2 and variance 4. What is its MSE?
6
4
16
8
Answer and working
D. 8
MSE = variance + bias^2 = 4 + 4 = 8.
Question 8 · medium
TSE recommends designing a survey to minimise:
Response rate per interviewer
The number of questions only
Total error at fixed cost
Sampling error at any cost
Answer and working
C. Total error at fixed cost
Trade-offs among error sources under a budget.
Question 9 · medium
Under the (n, k) dominance rule, a cell is sensitive if:
It has more than n contributors in all
Its n largest units exceed k% of the total
Its total exceeds k units of the variable
It lies in the nth row of the table
Answer and working
B. Its n largest units exceed k% of the total
A few dominant contributors could be estimated.
Question 10 · hard
Which pair captures the core trade-off in disclosure control?
Coding speed and entry speed
Sampling error and coverage error
Response rate and interview length
Disclosure risk and information loss
Answer and working
D. Disclosure risk and information loss
Each protection reduces analytical value.
A study plan for Survey Design, Questionnaires, Field Operations & Non-Sampling Errors in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (44% of the 77 questions): Response errors and interviewer effects; interpenetrating sub-samples (10, 13%); Confidentiality, disclosure control and release of microdata (8, 10%); Non-sampling errors: sources and classification (8, 10%); Post-enumeration surveys and coverage evaluation (8, 10%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Data processing, editing, coding and tabulation (7, 9%); Planning a survey: objectives, population, frame and budget (7, 9%); CAPI, mobile data collection and paradata (6, 8%); Pilot and pre-tests (6, 8%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Questionnaire and schedule design; recall periods (6, 8%); Total survey error framework (6, 8%); Field organisation: training, supervision and scrutiny (5, 6%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Post-enumeration surveys and coverage evaluation (3 hard of 8), Pilot and pre-tests (2 hard of 6), Questionnaire and schedule design; recall periods (2 hard of 6).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: CAPI, mobile data collection and paradata (2 easy of 6); Response errors and interviewer effects; interpenetrating sub-samples (2 easy of 10).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.