LAISHA
Open Laisha

US federal Mathematical Statistician Spatial Statistics, Geostatistics & Remote Sensing for Agriculture: practice questions

US federal Mathematical Statistician (series 1529) - USDA NASS and others · USA · USDA National Agricultural Statistics Service via USAJOBS (Office of Personnel Management rules)

Original practice questions written to the published syllabus · not past papers
10worked here, free
37written to this exam in this subject
5syllabus units

About US federal Mathematical Statistician

US federal Mathematical Statistician (series 1529) - USDA NASS and others is a government recruitment exam run by USDA National Agricultural Statistics Service via USAJOBS (Office of Personnel Management rules), for candidates in USA. No written exam: applications are rated on qualifications (statistics coursework and degree) and experience.

Official site: nass.usda.gov.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Spatial Statistics, Geostatistics & Remote Sensing for Agriculture in US federal Mathematical Statistician

Area-frame construction and stratification, regression estimators combining surveys with classified imagery, and accuracy assessment of crop maps.

Statistics for data with a location: spatial autocorrelation, variograms and kriging, spatial regression, point patterns, area-frame sampling, accuracy assessment of crop maps and satellite-based area and yield estimation. Remote-sensing physics and GIS operations are taught in the Agricultural Engineering track; this is the statistics.

Our 37 US federal Mathematical Statistician questions in this subject: 8 easy, 21 medium, 8 hard, across 5 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to US federal Mathematical Statistician and are not shown on any other exam's page.

Question 1 · easy

District-wise average yields of maize for all districts of a state form which type of spatial data?

  1. Areal (lattice) data
  2. Point-pattern data
  3. Marked point data
  4. Geostatistical (point-referenced) data
Answer and working

A. Areal (lattice) data

Values attached to fixed units that cover the region are areal or lattice data, analysed with spatial weights, Moran's I and SAR or CAR models.

Question 2 · medium

An analyst reassigns several sampled segments to different strata after seeing their crop areas. What is wrong?

  1. Reassignment always reduces the variance correctly
  2. Strata may be changed freely, so nothing is wrong
  3. Strata must be fixed before sampling
  4. Only the number of strata matters, not their membership
Answer and working

C. Strata must be fixed before sampling

Stratum membership and selection probabilities are defined by the design; changing them using the data invalidates the weights and variance estimates.

Question 3 · medium

What is the main advantage of object-based image analysis for high-resolution crop mapping?

  1. It classifies whole segments using spectra, texture and shape
  2. It uses only one spectral band
  3. It avoids the need for any reference data
  4. It requires no image segmentation step
Answer and working

A. It classifies whole segments using spectra, texture and shape

Segmenting into objects (ideally fields) and classifying them reduces salt-and-pepper noise and adds texture and shape features.

Question 4 · easy

An error matrix (rows = map, columns = reference) has map-wheat row 80 wheat and 20 other, and map-other row 10 wheat and 90 other. What is the overall accuracy?

  1. 0.889
  2. 0.80
  3. 0.85
  4. 0.70
Answer and working

C. 0.85

Overall accuracy = (80 + 90)/200 = 0.85. 0.80 is wheat user's accuracy; 0.889 is wheat producer's accuracy; 0.70 is kappa.

Question 5 · medium

A rare crop occupies 2 per cent of a mapped region. Which design for reference samples ensures enough samples to estimate its accuracy?

  1. Simple random sampling of the whole region
  2. Stratified random sampling by map class
  3. Sampling only along roads for easy access
  4. Using the classifier's training pixels again
Answer and working

B. Stratified random sampling by map class

Stratifying by map class guarantees a minimum sample in each class (often about 50 or more); simple random sampling would yield very few rare-crop points. Roadside and training samples are not valid probability samples.

Question 6 · medium

The correlation between enumerated and classified crop area across sample segments is 0.8. Approximately how efficient is the regression estimator relative to the ground-only estimate?

  1. 1.25 times
  2. 0.64 times
  3. 5.00 times
  4. 2.78 times
Answer and working

D. 2.78 times

Variance ratio is about 1 - rho^2 = 0.36, so relative efficiency = 1/0.36 = 2.78. Using 1/(1 - rho) gives 5.00; rho^2 is the share of variance explained, not the efficiency.

Question 7 · medium

What does a Fay-Herriot model do in district-level crop estimation?

  1. Replaces the survey with model predictions everywhere
  2. Combines each district's direct survey estimate with a satellite-based regression prediction
  3. Estimates the variogram of district yields
  4. Classifies satellite pixels into crop classes
Answer and working

B. Combines each district's direct survey estimate with a satellite-based regression prediction

The area-level small-area model shrinks each direct estimate towards a covariate-based prediction, weighting by their precisions: districts with large samples rely on the survey, small-sample districts on the model.

Question 8 · medium

Field-level crop-cutting yields are regressed on NDVI, and the model's prediction intervals for district yield look very narrow. Which neglected feature is a likely cause?

  1. Spatially autocorrelated residuals
  2. The inclusion of an intercept in the model
  3. The use of a probability sample of fields
  4. A normal distribution of residuals
Answer and working

A. Spatially autocorrelated residuals

Autocorrelated residuals mean fewer independent observations than assumed, so model-based standard errors and intervals are too small.

Question 9 · hard

In inverse calibration of crop areas from a classified map, which proportions from the accuracy sample are used?

  1. The proportion of each crop's pixels that are mapped correctly, inverted as a matrix
  2. The proportion of segments enumerated by each enumerator
  3. The proportion of each map class that is truly each crop
  4. The proportion of cloud-free pixels in each image
Answer and working

C. The proportion of each map class that is truly each crop

Inverse calibration multiplies mapped areas by the proportions of each map class found in each true class; direct calibration uses the reverse proportions and requires inverting the matrix.

Question 10 · medium

Insurance payouts in a block depend on a satellite-assisted yield estimate. What is the most important statistical safeguard?

  1. Releasing only the point estimate to avoid confusion
  2. Adjusting estimates to match farmers' claims
  3. Using the newest satellite without validation
  4. A documented probability design with stated uncertainty
Answer and working

D. A documented probability design with stated uncertainty

Where money depends on estimates, the design, models and uncertainty must be documented and auditable; unvalidated sensors and post-hoc adjustment undermine credibility.

A study plan for Spatial Statistics, Geostatistics & Remote Sensing for Agriculture in US federal Mathematical Statistician

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (51% of the 37 questions): Image classification as a statistical problem (10, 27%); Accuracy assessment: error matrices and kappa; area estimation from maps (9, 24%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Satellite-based crop area and yield estimation (9, 24%); Area-frame sampling with satellite stratification (8, 22%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Spatial data types: geostatistical, areal and point-pattern (1, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Accuracy assessment: error matrices and kappa; area estimation from maps (3 hard of 9), Satellite-based crop area and yield estimation (2 hard of 9), Image classification as a statistical problem (2 hard of 10).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Spatial data types: geostatistical, areal and point-pattern (1 easy of 1); Area-frame sampling with satellite stratification (3 easy of 8).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — US federal Mathematical Statistician Spatial Statistics, Geostatistics & Remote Sensing fo

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.