ICAR AICE-JRF/SRF (PhD) — Environmental Sciences (subject 71) and Agricultural Meteorology (subject 60) · India · National Testing Agency for ICAR
Original practice questions written to the published syllabus · not past papersICAR AICE-JRF/SRF (PhD) — Environmental Sciences (subject 71) and Agricultural Meteorology (subject 60) is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. Computer-based MCQ paper for PhD admission and the JRF/SRF fellowship; one paper per subject. Timing and marking follow the yearly bulletin and were not re-read.
Source: icar.org.in.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Climate variability and change, ENSO and monsoon forecasting, long-range forecasts and LPA categories, GCMs and RCMs, downscaling and bias correction for crop impact studies, and climate indices.
How future climate is projected and how to use projections responsibly: model hierarchy, CMIP ensembles, RCP and SSP scenarios, downscaling and bias correction, and uncertainty. Needed for impact studies, climate-risk disclosure and adaptation planning.
Our 36 ICAR AICE-JRF/SRF questions in this subject: 9 easy, 19 medium, 8 hard, across 10 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Why do climate models need parameterisations?
B. Sub-grid processes such as convective clouds cannot be resolved explicitly
Sub-grid processes such as convection, cloud microphysics and turbulence are represented by parameterisations in terms of resolved variables. They are not legal requirements, the large-scale flow is resolved from physical laws, and models are still evaluated against observations.
What three statistics does a Taylor diagram display for a model compared with observations?
D. Pattern correlation, standard deviation ratio and centred RMS error
The Taylor diagram summarises pattern correlation, the ratio of standard deviations and the centred RMS difference on one plot. Bias, sensitivity, resolution and scenario are not its axes.
What is dynamical downscaling?
D. Running a regional model driven at its edges by global model output
Dynamical downscaling uses an RCM nested in GCM or reanalysis boundary conditions. Regression is statistical downscaling; averaging is ensemble meaning; interpolation adds no physical information.
Using linear scaling, a model's reference-period mean July maximum temperature is 28.5 °C and the observed mean is 27.0 °C. The model projects 29.4 °C for a future July. What is the corrected value?
B. 27.9 °C
Additive correction: 29.4 + (27.0 − 28.5) = 27.9 °C. 30.9 applies the bias with the wrong sign; 27.0 is the observed mean, which ignores the projected change; 29.4 is uncorrected.
Roughly how long does deterministic predictability of day-to-day weather last before chaos destroys skill?
A. About two weeks
Lorenz's work on chaos implies deterministic skill is lost after roughly two weeks; beyond that, skill comes from slowly varying boundary conditions and is probabilistic.
In India Meteorological Department long-range forecasts, what range of the long period average defines 'normal' southwest monsoon rainfall?
B. 96–104 per cent
IMD: below 90% deficient, 90–95% below normal, 96–104% normal, 105–110% above normal, above 110% excess. The LPA for 1971–2020 is about 87 cm.
A 15-day daily rainfall record (mm) reads: 0, 0, 12.5, 3.2, 0, 0, 0, 0, 25, 0.4, 0, 7.8, 15.1, 0, 0. Using the ETCCDI definition (dry day < 1 mm), what is CDD, the longest run of consecutive dry days?
A. 4 days
Dry days are those under 1 mm. The runs are 2 (days 1–2), 4 (days 5–8), 2 (days 10–11, as 0.4 mm counts as dry) and 2 (days 14–15). The longest is 4. 10 is the total number of dry days, not the longest run; 3 and 5 miscount the run.
For the same 15-day record (0, 0, 12.5, 3.2, 0, 0, 0, 0, 25, 0.4, 0, 7.8, 15.1, 0, 0 mm), what is the simple daily intensity index SDII (wet day ≥ 1 mm)?
C. 12.72 mm day⁻¹
Wet days ≥ 1 mm: 12.5, 3.2, 25.0, 7.8, 15.1 (5 days, total 63.6 mm). SDII = 63.6/5 = 12.72. 4.27 divides all rain by 15 days; 10.67 counts the 0.4 mm day as wet; 25.00 is Rx1day.
Which ETCCDI index gives the annual maximum five-day precipitation total?
A. Rx5day
Rx5day is the maximum consecutive five-day total. R95p is rainfall on very wet days above the 95th percentile, CWD the longest wet spell, and PRCPTOT total wet-day rainfall.
How is the Dipole Mode Index for the Indian Ocean Dipole defined?
B. West minus south-east tropical Indian Ocean SST anomaly
The DMI is the SST anomaly difference between the western and south-eastern equatorial Indian Ocean. Tahiti–Darwin is the Southern Oscillation Index, Niño 3.4 is ENSO, and Azores–Iceland is the NAO.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.