ICAR AIEEA (PG): Master's entrance, Veterinary Science and Animal Sciences · India · NTA for ICAR
Original practice questions written to the published syllabus · not past papersICAR AIEEA (PG): Master's entrance, Veterinary Science and Animal Sciences is a postgraduate admission exam run by NTA for ICAR, for candidates in India. Computer-based, 120 MCQs in 120 minutes, +4 for correct and -1 for wrong, maximum 480. English only.
Source: icar.org.in.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Short numerical problems on mean, median, mode, SD, CV and SE; properties of the normal, binomial and Poisson distributions; choice and df of t, chi-square and F tests; correlation and regression coefficients; df in CRD and RBD.
The statistics a veterinarian needs to read a paper, design a trial or analyse herd records: descriptive statistics, tests of significance, regression and experimental design.
Our 86 ICAR AIEEA questions in this subject: 37 easy, 40 medium, 9 hard, across 12 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AIEEA and are not shown on any other exam's page.
Weight gains of 36 broilers have SD 12 g. What is the standard error of the mean?
B. 2 g
SE = SD/√n = 12/√36 = 12/6 = 2 g. 0.33 g is SD/n (forgetting the square root) and 6 g is √36 alone.
Birth weights of calves of a breed are normally distributed with mean 30 kg and SD 4 kg. What percentage of calves weigh more than 38 kg?
A. 2.28%
z = (38 − 30)/4 = 2.0; area above z = 2 is 0.0228, i.e. 2.28%. 4.55% counts both tails; 47.72% is the area between the mean and z = 2; 5.00% treats z = 2 as the two-tailed 1.96 cut-off.
From a list of 80 villages, 10 villages are chosen at random and every pig in those 10 villages is examined. What is this design called, and what is its main drawback?
A. Cluster sampling; pigs within a village resemble each other, lowering precision
Selecting groups and examining all their members is cluster sampling. It needs no list of individual pigs, but animals in one village share exposures, so the effective sample size is lower than the number of pigs examined (the design effect).
Sixteen goats on a new ration gain on average 52 g/day with SD 8 g. Is this different from the established 48 g/day? Use a two-tailed one-sample t-test at 5% (critical t for 15 df = 2.131).
A. t = 2.00; not significant
SE = 8/√16 = 2; t = (52 − 48)/2 = 2.00 < 2.131, so H0 is not rejected. 0.50 divides by the SD instead of the SE; 8.00 divides the SD by n instead of √n.
Rumen pH is measured in the same eight cows before and after a change of ration. Which test compares the two sets of readings?
A. Paired t-test
Each cow supplies both readings, so differences within cows are analysed with the paired t-test, removing between-cow variation. An unpaired test ignores the pairing and loses power; chi-square needs counts.
What is the power of a statistical test?
B. The probability of rejecting H0 when a stated real effect exists
Power = 1 − β, the chance of detecting a real effect of a given size. Rejecting a true H0 is α; accepting a true H0 has probability 1 − α.
Body weights are converted from kilograms to pounds. What happens to the correlation coefficient with heart girth and to the regression coefficient of weight on girth?
B. Correlation unchanged; regression coefficient changes
r is independent of change of origin and scale, so it stays the same; the regression coefficient carries units of y per unit of x and is multiplied by the conversion factor.
The SD of adult body weight in a sheep breed is 15 kg. How many sheep are needed to estimate the mean weight within ±3 kg at 95% confidence, using n = z²σ²/d²?
B. 97
n = 1.96² × 225/9 = 96.04, rounded up to 97. 96 rounds down, which falls short of the stated precision; 10 omits squaring z and σ/d; 25 is (σ/d)² without z².
Which change increases the sample size required for a comparative trial?
A. Reducing the smallest difference to be detected
n is proportional to σ²/Δ², so halving Δ quadruples n. Lower power, a larger α and a smaller SD all reduce the number needed.
What is the binary representation of the decimal number 13?
D. 1101
13 = 8 + 4 + 1 = 1101 (repeated division by 2 gives remainders 1, 0, 1, 1, read upward). 1011 is 11, 1110 is 14 and 1001 is 9.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.