LAISHA
Open Laisha

Japan Professional Engineer (技術士) First-stage Exam — Agriculture division

Japan · Institution of Professional Engineers, Japan (IPEJ)

58practice questions written to this syllabus
3subjects

What Japan Professional Engineer First-stage Exam is

Japan Professional Engineer (技術士) First-stage Exam — Agriculture division is a licensing and registration exam run by Institution of Professional Engineers, Japan (IPEJ), for candidates in Japan.

Format

Five-option multiple choice on mark sheet: basic science 1 h (15 of 30), aptitude/ethics 1 h (15 questions), specialist 2 h (25 of 35, 50 marks). No eligibility limits.

Sections

How it has changed

Leads to Associate Professional Engineer (技術士補). Pass line not verified. The 2026 date shown was 22 Nov 2026; recheck.

How to prepare for Japan Professional Engineer First-stage Exam

Where our 58 questions for it fall

Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.

  1. Heaviest (52% of the questions): Crop Production & Protection for Engineers (30).

    Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.

  2. Middle band: Engineering Physics & Chemistry (14).

    One pass per subject, then mixed sets across them.

  3. Lighter: Professional Practice, Ethics & Laws (14).

    Definitions, classifications and standard figures; quick to revise, easy marks to lose.

  4. Hardest share: Engineering Physics & Chemistry (4 hard of 14), Professional Practice, Ethics & Laws (3 hard of 14), Crop Production & Protection for Engineers (5 hard of 30).

    Leave untimed time for these and read every explanation, including for the options you rejected.

Official source: engineer.or.jp

8 practice questions, worked

Original questions written to this exam's published syllabus and pattern. Not past papers.

1. Weed-free plots yield 4.8 t/ha and a herbicide treatment yields 4.2 t/ha. What is the weed index of the treatment?

  1. 12.5 %
  2. 14.3 %
  3. 0.6 %
  4. 87.5 %
Answer and working

A. 12.5 %

Weed index = (4.8 − 4.2) ÷ 4.8 × 100 = 12.5 %. 14.3 % divides by the treatment yield instead of the weed-free yield; 87.5 % is the treatment yield as a share of weed-free yield; 0.6 is the yield gap in t/ha, not a percentage.

Crop Production & Protection for Engineers · Weed management

2. A farmer irrigates a prepared field, lets the first flush of weeds emerge, kills them with a shallow pass or a non-selective herbicide, and then sows. This practice is called:

  1. Soil solarisation
  2. Smother cropping
  3. A stale seedbed
  4. Allelopathic mulching
Answer and working

C. A stale seedbed

The stale seedbed technique depletes the surface weed seed bank before sowing. Solarisation heats moist soil under clear plastic; smother cropping uses a competitive crop to suppress weeds; allelopathic mulching relies on chemicals released by residue.

Crop Production & Protection for Engineers · Weed management

3. The pre-harvest interval on a pesticide label is:

  1. The shelf life of the pesticide container before it must be discarded
  2. The minimum time between the last application and harvest of the crop
  3. The time a sprayer must stand idle before it is used for another product
  4. The period before sowing during which a soil pesticide must be applied
Answer and working

B. The minimum time between the last application and harvest of the crop

The PHI ensures residues fall below the maximum residue limit by harvest. Equipment cleaning, pre-plant soil timing and shelf life are separate label items.

Crop Production & Protection for Engineers · Pest and disease management and application rates

4. In an experiment, weed dry matter is 240 g/m² in the unweeded control and 36 g/m² in a herbicide treatment. What is the weed control efficiency?

  1. 85 %
  2. 567 %
  3. 15 %
  4. 118 %
Answer and working

A. 85 %

WCE = (240 − 36) ÷ 240 × 100 = 85 %. 15 % is the share of weeds remaining (36 ÷ 240); 567 % divides the reduction by the treated value (204 ÷ 36); 118 % inverts the formula (240 ÷ 204).

Crop Production & Protection for Engineers · Weed management

5. A fungicide is recommended at 0.75 kg a.i./ha. The product contains 500 g a.i. per litre and the sprayer applies 300 L/ha from a 400 L tank. How much product goes into each full tank?

  1. 1.0 L
  2. 1.5 L
  3. 2.0 L
  4. 1.1 L
Answer and working

C. 2.0 L

Product per ha = 0.75 ÷ 0.5 = 1.5 L. One tank covers 400 ÷ 300 = 1.333 ha, so product per tank = 1.5 × 1.333 = 2.0 L. 1.5 L is the per-hectare amount; 1.1 L scales by 300/400 instead of 400/300; 1.0 L treats the 0.75 kg a.i. dose as if it were litres of product (0.75 × 1.333).

Crop Production & Protection for Engineers · Pest and disease management and application rates

6. A tractor engine oil is described as having a high viscosity index. What does this tell the user?

  1. It is very thick at all temperatures and so suits only slow, heavily loaded engines
  2. Its viscosity changes relatively little between cold starts and hot running
  3. It stays liquid below −40 °C because the viscosity index is its pour point in kelvin
  4. Its flash point is high, so it can be stored next to fuel with no fire precautions
Answer and working

B. Its viscosity changes relatively little between cold starts and hot running

Viscosity index measures how much viscosity changes with temperature; a high value means the oil thins less when hot and thickens less when cold. It says nothing directly about thickness at one temperature, about flash point, or about pour point, which are separate tests.

Engineering Physics & Chemistry · Fuels and combustion chemistry

7. An engineer working abroad finds that a local rule permits guards to be omitted from threshers, which would be illegal in her home country. Her employer proposes to omit them. What does professional ethics require?

  1. Follow the local rule, since engineers must obey the law where the work is done
  2. Follow the local rule but warn users verbally, which meets the duty of care
  3. Require guards anyway, treating the local law merely as the bare minimum
  4. Refer the matter to her home country's courts before taking any position
Answer and working

C. Require guards anyway, treating the local law merely as the bare minimum

Local law sets the minimum. An engineer remains bound by the code of the body that registered her, which puts public safety first, so a legal but dangerous practice is still unacceptable. Verbal warnings do not replace guarding, which ranks above warnings in the safety hierarchy.

Professional Practice, Ethics & Laws · Codes of ethics for engineers

8. Atrazine, used pre-emergence in maize and sorghum, kills susceptible weeds by:

  1. Inhibiting photosynthesis at photosystem II
  2. Inhibiting the enzyme EPSP synthase
  3. Inhibiting acetyl-CoA carboxylase in grasses
  4. Acting as a synthetic auxin
Answer and working

A. Inhibiting photosynthesis at photosystem II

Atrazine, a triazine, binds in photosystem II and blocks electron transport. EPSPS inhibition is glyphosate; synthetic auxin is 2,4-D and MCPA; ACCase inhibition is the grass herbicides such as clodinafop.

Crop Production & Protection for Engineers · Weed management

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock all 58 questions — Japan Professional Engineer (技術士) First-stage Exam — Agriculture division

US$10 a month · one price worldwide · cancel any time

  • Every practice question for this course, with explanations
  • Timed papers for the exams this course leads to
  • Ask Laisha to explain any topic — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.