National Technical Qualification — Food Engineer (식품기사) and Food Industrial Engineer (식품산업기사)
South Korea · Human Resources Development Service of Korea (HRDK), Q-Net · unverified source
179practice questions written to this syllabus
20subjects
What National Technical Qualification is
National Technical Qualification — Food Engineer (식품기사) and Food Industrial Engineer (식품산업기사) is a licensing and registration exam run by Human Resources Development Service of Korea (HRDK), Q-Net, for candidates in South Korea.
Format
Written examination followed by a practical examination; graded national technical qualifications.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose.
Check the current format, eligibility, fees and dates on the official site: q-net.or.kr.
How it has changed
Widely held by food technologists in Korean industry and public service.
How to prepare for National Technical Qualification
Where our 179 questions for it fall
Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.
Heaviest (53% of the questions): General Microbiology (21); Transport Phenomena in Food Processing: Fluid Flow, Heat & Mass Transfer (15); Mechanical Unit Operations: Size Reduction, Mixing & Separation (13); Food Plant Design, Hygienic Engineering, Utilities & Automation (12); New Food Product Development & Formulation (12); Sensory Science & Consumer Research (11); Food Microbiology: Spoilage, Pathogens & Detection (10).
Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.
Middle band: Bakery, Pasta & Snack Food Technology (10); Human Nutrition & Nutritional Quality of Processed Foods (9); Principles of Food Science & Food Preservation (8); Mathematics for Food Science & Engineering (7); Food Analysis: Proximate, Chemical & Instrumental Methods (7); Physical Properties, Rheology & Texture of Foods (6); Extrusion & Texturisation Technology (6).
One pass per subject, then mixed sets across them.
Definitions, classifications and standard figures; quick to revise, easy marks to lose.
Hardest share: Food Packaging Science & Technology (4 hard of 6), Shelf-life Science & Food Stability (4 hard of 6), Novel & Non-thermal Food Processing Technologies (3 hard of 5).
Leave untimed time for these and read every explanation, including for the options you rejected.
Original questions written to this exam's published syllabus and pattern. Not past papers.
1. A thermal process validated by heat-penetration tests in a pilot retort is moved to a production retort. What is required?
Revalidate heat distribution and penetration at full scale
Halve the process time, because larger retorts always heat faster
Accept the process if the first production batch shows no visible spoilage
Nothing, because a process validated at pilot scale is valid in any retort
Answer and working
A. Revalidate heat distribution and penetration at full scale
Heat distribution and come-up differ between retorts, so temperature distribution and heat-penetration studies are repeated at full scale. Larger loads often heat more slowly, and the absence of visible spoilage does not demonstrate sterility.
Food Plant Design, Hygienic Engineering, Utilities & Automation · Scale-up and pilot plants
2. Carcass weight loss during chilling can be reduced by
raising air velocity and lowering the humidity throughout the whole chilling period
lowering air velocity and raising humidity once the surface is cool
heating the carcass surface to dry it quickly
spraying the carcass with oil before chilling
Answer and working
B. lowering air velocity and raising humidity once the surface is cool
Evaporation rate rises with km (air velocity) and the vapour-concentration difference; spray chilling and humid air reduce it.
Transport Phenomena in Food Processing: Fluid Flow, Heat & Mass Transfer · Convective mass transfer
3. A dairy's skim milk contains too much fat after separation. A likely cause is
feeding the separator faster than its rated capacity
separating at a slightly higher temperature within the normal range
using a newly cleaned bowl
reducing the feed rate
Answer and working
A. feeding the separator faster than its rated capacity
Overfeeding shortens residence time so small globules escape; cold milk and fouled discs also raise skim fat.
Mechanical Unit Operations: Size Reduction, Mixing & Separation · Centrifugation and centrifugal separators
4. A simulated test market:
Replaces all consumer research
Sells the product in a whole country
Forecasts sales with models
Tests packaging only
Answer and working
C. Forecasts sales with models
Faster and cheaper than city tests.
New Food Product Development & Formulation · Test marketing and commercial launch
5. An inoculating loop is correctly sterilised by:
Dipping in 70% ethanol and using it while wet
Rinsing in sterile water between samples
Wiping with a dry tissue between each transfer
Flaming until red hot, then cooling it briefly
Answer and working
D. Flaming until red hot, then cooling it briefly
Flaming to red heat incinerates organisms; the loop must cool so it does not kill the inoculum. Ethanol does not kill spores.
General Microbiology · Aseptic technique and laboratory biosafety
6. Ham sandwiches prepared by a worker with a boil on his hand were left at room temperature for 5 hours. Diners vomited 2 hours after eating. Why did toasting the sandwiches just before serving fail to prevent illness?
Toasting raises the water activity of ham and speeds toxin release
Heat activates staphylococcal spores, which then produce toxin quickly
Toasting is too brief to kill vegetative cells of Staphylococcus aureus
Staphylococcal enterotoxins are heat-stable and survive the heating
Answer and working
D. Staphylococcal enterotoxins are heat-stable and survive the heating
S. aureus is killed by heat, but its enterotoxins are heat-stable. S. aureus does not form spores.
Food Microbiology: Spoilage, Pathogens & Detection · Spore-formers and toxin producers: Clostridium botulinum, C. perfringens, Bacillus cereus and Staphylococcus aureus
7. On Baird-Parker agar, typical colonies of Staphylococcus aureus are:
Blue-green with an opaque halo
Black and shiny with a clear zone
Red with black centres
Pink with a lecithinase precipitate
Answer and working
B. Black and shiny with a clear zone
Tellurite reduction gives black colonies, and egg-yolk clearing gives the zone. Pink with precipitate is B. cereus on MYP; red with black centres is Salmonella on XLD; blue-green with halo is L. monocytogenes on ALOA.
Food Microbiology: Spoilage, Pathogens & Detection · Spore-formers and toxin producers: Clostridium botulinum, C. perfringens, Bacillus cereus and Staphylococcus aureus
8. 100 kg of vegetable at 80% moisture (wet basis) is dried to 10% moisture. How much water is removed?
22.2 kg
77.8 kg
80.0 kg
70.0 kg
Answer and working
B. 77.8 kg
Solids = 20 kg; final mass = 20/0.90 = 22.2 kg; water removed = 100 − 22.2 = 77.8 kg. 70 kg subtracts the percentages; 22.2 kg is the dried product mass.
Principles of Food Science & Food Preservation · Preservation by removal of water: drying, concentration and intermediate-moisture foods