LAISHA
Open Laisha

National Postgraduate Entrance Exam Engineering Mathematics: practice questions

National Postgraduate Entrance Exam (考研) — 0828 Agricultural Engineering · China · Ministry of Education / NEEA and universities

Original practice questions written to the published syllabus · not past papers
10worked here, free
22written to this exam in this subject
14syllabus units

About National Postgraduate Entrance Exam

National Postgraduate Entrance Exam (考研) — 0828 Agricultural Engineering is a postgraduate admission exam run by Ministry of Education / NEEA and universities, for candidates in China. Politics 100 + foreign language 100 + two subject papers of 150 each (a national mathematics paper or a specialist foundation paper).

Official site: moe.gov.cn.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Engineering Mathematics in National Postgraduate Entrance Exam

Where the national mathematics paper is taken, it goes deeper into proofs and theory: convergence of series, multivariable extrema with constraints, line and surface integrals with the Green, Stokes and Gauss theorems, and linear algebra including diagonalisation.

The algebra, calculus, differential equations and numerical methods used in every numerical question of the degree. GATE AG gives it a fixed block of marks every year.

Our 22 National Postgraduate Entrance Exam questions in this subject: 0 easy, 10 medium, 12 hard, across 14 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to National Postgraduate Entrance Exam and are not shown on any other exam's page.

Question 1 · hard

What is lim((x, y)→(0, 0)) xy/(x² + y²)?

  1. 0
  2. The limit does not exist
  3. 1
  4. 1/2
Answer and working

B. The limit does not exist

Along y = mx the expression is m/(1 + m²), which depends on m: 0 along the x-axis, 1/2 along y = x. A limit must be the same along every path, so it does not exist. Answering 0 checks only the axes; 1/2 checks only the line y = x.

Question 2 · hard

If u = sin⁻¹[(x² + y²)/(x + y)], then x ∂u/∂x + y ∂u/∂y equals

  1. 2 tan u
  2. tan u
  3. sin u
  4. u
Answer and working

B. tan u

u itself is not homogeneous, but z = sin u = (x² + y²)/(x + y) is homogeneous of degree 1. Euler: x zₓ + y z_y = z. Since zₓ = cos u · uₓ, this gives cos u (x uₓ + y u_y) = sin u, so x uₓ + y u_y = tan u. Answering u applies Euler to u directly, which is not allowed; 2 tan u takes the degree as 2 from the numerator alone.

Question 3 · medium

For f(x, y) = x³ + y³ − 3xy, which statement about its stationary points is correct?

  1. (0, 0) is a local minimum with f = 0
  2. (0, 0) is a local maximum and (1, 1) is a local minimum
  3. (0, 0) is a saddle point and (1, 1) is a local minimum with f = −1
  4. (1, 1) is a local maximum with f = −1
Answer and working

C. (0, 0) is a saddle point and (1, 1) is a local minimum with f = −1

fₓ = 3x² − 3y = 0 and f_y = 3y² − 3x = 0 give (0, 0) and (1, 1). r = 6x, s = −3, t = 6y. At (0, 0): rt − s² = −9 < 0, a saddle. At (1, 1): rt − s² = 36 − 9 = 27 > 0 with r = 6 > 0, a minimum, f = 1 + 1 − 3 = −1. Calling (0, 0) an extremum ignores the sign of rt − s².

Question 4 · hard

f(x) = x² on −π < x < π, periodic with period 2π, has Fourier series a₀/2 + Σ aₙ cos(nx). What are the constant term a₀/2 and a₁?

  1. a₀/2 = 2π²/3, a₁ = −4
  2. a₀/2 = π²/3, a₁ = −4
  3. a₀/2 = π²/3, a₁ = 4
  4. a₀/2 = π²/6, a₁ = −4
Answer and working

B. a₀/2 = π²/3, a₁ = −4

a₀ = (1/π)∫ x² dx over (−π, π) = 2π²/3, so the constant term a₀/2 = π²/3 (the mean value of x²). aₙ = (1/π)∫ x² cos(nx) dx = 4(−1)ⁿ/n², so a₁ = −4. Writing 2π²/3 forgets to halve a₀; +4 misses the (−1)ⁿ factor.

Question 5 · medium

Using Green's theorem, what is ∮(x dy − y dx) taken anticlockwise around the circle x² + y² = 4?

  1. 16π
  2. 8π
  3. 4π
  4. 0
Answer and working

B. 8π

Green: ∮(P dx + Q dy) = ∬(∂Q/∂x − ∂P/∂y) dA. With P = −y, Q = x, the integrand is 1 − (−1) = 2, so the result is 2 × area = 2 × π(2²) = 8π. 4π is the area alone (it would need the factor ½ in front of the integral); 16π is π × 4², the area of a circle of radius 4 (reading the 4 in x² + y² = 4 as the radius), without the factor 2; 0 comes from treating the field as conservative.

Question 6 · hard

What is a particular integral of y'' + y = sin x?

  1. −sin x/2
  2. −(x/2)cos x
  3. (x/2)sin x
  4. (x/2)cos x
Answer and working

B. −(x/2)cos x

sin x already solves the homogeneous equation (resonance), so the trial must be multiplied by x. The standard result is PI = −(x/2)cos x; check: y'' + y = sin x. −sin x/2 uses the non-resonant formula 1/(1 − a²) wrongly; (x/2)cos x has the wrong sign.

Question 7 · hard

What is the inverse Laplace transform of 1/[s²(s + 1)]?

  1. 1 − e^(−t)
  2. t − 1 + e^(−t)
  3. t − e^(−t)
  4. t + 1 − e^(−t)
Answer and working

B. t − 1 + e^(−t)

Partial fractions: 1/[s²(s + 1)] = 1/s² − 1/s + 1/(s + 1), giving t − 1 + e^(−t). Cover-up: the coefficient of 1/s² is 1 and of 1/(s + 1) is 1; the coefficient of 1/s must then be −1 so that the s² terms cancel. The convolution of t and e^(−t) gives the same result. t + 1 − e^(−t) reverses the last two signs; t − e^(−t) drops the 1/s term; 1 − e^(−t) is the inverse of 1/[s(s + 1)].

Question 8 · hard

A rod of length L = 0.5 m with both ends held at 0 °C has initial temperature u(x, 0) = 50 sin(πx/L) °C and diffusivity α = 1 × 10⁻⁴ m²/s. From the heat equation u_t = α u_xx, what is the mid-point temperature after 600 s?

  1. 50.00 °C
  2. 23.52 °C
  3. 4.68 °C
  4. 15.30 °C
Answer and working

C. 4.68 °C

The separated solution is u = 50 sin(πx/L) e^(−α(π/L)²t). At the mid-point sin(π/2) = 1, and α π² t/L² = 1e-4 × 9.8696 × 600/0.25 = 2.3687. u = 50e^(−2.3687) = 4.68 °C. Using π instead of π² gives 23.52 °C and L instead of L² gives 15.30 °C; 50 °C ignores the decay.

Question 9 · medium

For a smooth integrand, halving the step size h in the composite Simpson's 1/3 rule reduces the error by a factor of about

  1. 16
  2. 8
  3. 2
  4. 4
Answer and working

A. 16

The composite Simpson error is O(h⁴), so (1/2)⁴ = 1/16. Factor 4 is the composite trapezoidal rule, whose error is O(h²). 8 assumes an O(h³) error.

Question 10 · hard

Explicit Euler is applied to the stiff equation y' = −50y. For the numerical solution not to grow, the step size must satisfy

  1. h < 0.04
  2. h < 0.4
  3. h < 2
  4. h < 0.02
Answer and working

A. h < 0.04

Euler gives y(n+1) = (1 − 50h)y(n). Stability needs |1 − 50h| < 1, i.e. 0 < h < 2/50 = 0.04. h < 0.02 is the condition for no oscillation (1 − 50h > 0), stricter than stability; h < 2 forgets to divide by λ. h < 0.4 misplaces the decimal in 2/50.

A study plan for Engineering Mathematics in National Postgraduate Entrance Exam

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (50% of the 22 questions): Eigenvalues, eigenvectors and the Cayley-Hamilton theorem (3, 14%); Higher-order linear ordinary differential equations (2, 9%); Line, surface and volume integrals: Green, Stokes and Gauss theorems (2, 9%); Maxima and minima of functions of several variables (2, 9%); Partial differential equations: Laplace, heat and wave equations (2, 9%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Sequences, series and convergence (2, 9%); Taylor, Maclaurin and Fourier series (2, 9%); Euler's theorem on homogeneous functions (1, 5%); Laplace transforms (1, 5%); Limits, continuity and partial derivatives (1, 5%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Numerical integration: trapezoidal and Simpson's rules (1, 5%); Numerical solution of equations: bisection and Newton-Raphson (1, 5%); Numerical solution of ODEs: Euler and Runge-Kutta methods (1, 5%); Vector calculus: gradient, divergence and curl (1, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Higher-order linear ordinary differential equations (2 hard of 2), Euler's theorem on homogeneous functions (1 hard of 1), Laplace transforms (1 hard of 1).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — National Postgraduate Entrance Exam Engineering Mathematics

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.