NCEES FE Other Disciplines · USA · NCEES
Original practice questions written to the published syllabus · not past papersNCEES FE Other Disciplines is a licensing and registration exam run by NCEES, for candidates in USA. Computer-based, 110 questions, 6-hour appointment (5 h 20 min exam).
Source: ncees.org.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
About 8–12 mathematics questions answered with the NCEES FE Reference Handbook available on screen. Formulas are given, so the test is choosing and applying the right one quickly: derivatives and integrals, vector operations, differential equations, matrix operations and numerical methods such as Newton's method and the trapezoidal rule. Probability and statistics are a separate section of the exam.
The algebra, calculus, differential equations and numerical methods used in every numerical question of the degree. GATE AG gives it a fixed block of marks every year.
Our 58 NCEES FE Other Disciplines questions in this subject: 22 easy, 24 medium, 12 hard, across 16 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to NCEES FE Other Disciplines and are not shown on any other exam's page.
What is the inverse of the 2×2 matrix [[4, 7], [2, 6]]?
C. (1/10)[[6, −7], [−2, 4]]
det = 4·6 − 7·2 = 10. For [[a, b], [c, d]] the inverse is (1/det)[[d, −b], [−c, a]]: swap the diagonal and negate the off-diagonal. Forgetting to negate b and c gives [[6, 7], [2, 4]]; not swapping a and d gives [[4, −7], [−2, 6]]; adding instead of subtracting in the determinant gives 38.
z = x²y with x = t² and y = t³. What is dz/dt at t = 1?
A. 7
Chain rule: dz/dt = (∂z/∂x)(dx/dt) + (∂z/∂y)(dy/dt) = (2xy)(2t) + (x²)(3t²). At t = 1, x = y = 1: 2·2 + 1·3 = 7. Check: z = t⁷, dz/dt = 7t⁶ = 7. Taking only one path gives 4 or 3; 5 and 6 come from adding exponents wrongly.
The radius of a circular centre-pivot field is measured as 50 m with a possible error of 0.5 m. Using differentials, what is the approximate percentage error in the computed area?
D. 2%
A = πr², so dA/A = 2 dr/r = 2 × 0.5/50 = 0.02 = 2%. The relative error of rⁿ is n times the relative error of r. 1% forgets the factor 2 from the square; 4% squares the 2 as well.
The p-series Σ 1/nᵖ (n = 1 to ∞) converges if and only if
C. p > 1
By the integral test, ∫ dx/xᵖ from 1 to ∞ is finite only for p > 1. At p = 1 it is the harmonic series, which diverges, so p ≥ 1 is wrong. p > 0 only makes the terms tend to zero, which is not enough.
Using the first three non-zero terms of the Maclaurin series, what is sin(0.2) (0.2 in radians)?
B. 0.198669
sin x = x − x³/3! + x⁵/5! − …: 0.2 − 0.008/6 + 0.00032/120 = 0.198669 (true value 0.198669). Dividing by 3 and 5 instead of 3! and 5! gives 0.197397; dropping the alternating sign gives 0.201336; 0.003490 is sin(0.2°), a degrees slip.
Evaluate ∫₀¹ ∫₀ˣ xy dy dx.
A. 1/8
Inner: ∫₀ˣ xy dy = x·x²/2 = x³/2. Outer: ∫₀¹ x³/2 dx = 1/8. 1/4 comes from integrating y over 0 to 1 (wrong inner limit), giving ∫ x/2 dx = 1/4.
What is a particular integral of y'' − 3y' + 2y = e^(3x)?
B. e^(3x)/2
For e^(ax) with f(a) ≠ 0, PI = e^(ax)/f(a). f(m) = m² − 3m + 2, f(3) = 9 − 9 + 2 = 2, so PI = e^(3x)/2. 1/20 uses 9 + 9 + 2 (sign slip on −3m).
Apply one Newton-Raphson step to x eˣ − 1 = 0 from x₀ = 0.5. What is x₁ (to 4 decimals)?
C. 0.5710
f(0.5) = 0.5e^0.5 − 1 = -0.17564; f'(x) = eˣ(1 + x), f'(0.5) = 2.47308. x₁ = 0.5 − (-0.17564)/(2.47308) = 0.5710. Using f' = eˣ (forgetting the product rule) gives 0.6065; 0.5671 is the converged root, not one step. 0.4290 adds the correction instead of subtracting it.
Using the trapezoidal rule with h = 0.5, what is ∫₀¹ x² dx?
C. 0.375
Points x = 0, 0.5, 1 → f = 0, 0.25, 1. T = (h/2)[f₀ + 2f₁ + f₂] = 0.25 × (0 + 0.5 + 1) = 0.375 (exact 1/3; the rule over-estimates a convex function). 0.750 forgets the h/2 and uses h; 0.3333 is the exact value, which Simpson's rule would give.
A storm hydrograph at a watershed outlet is read every hour: 0, 5, 12, 8, 3 and 0 m³/s. Using the trapezoidal rule, what is the runoff volume?
A. 100,800 m³
h = 1 h = 3,600 s. V = (h/2)[Q₀ + Q₅ + 2(Q₁ + Q₂ + Q₃ + Q₄)] = 1,800 × 2 × 28 = 100,800 m³. Forgetting to convert hours to seconds gives 28; converting 1 h to 60 s gives 1,680; using h instead of h/2 doubles the result to 201,600 m³.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.