State statistical services: Statistical Officer / Assistant Statistical Officer (State PSCs and selection boards) · India · State Public Service Commissions and Subordinate Service Selection Boards
Original practice questions written to the published syllabus · not past papersState statistical services: Statistical Officer / Assistant Statistical Officer (State PSCs and selection boards) is a government recruitment exam run by State Public Service Commissions and Subordinate Service Selection Boards, for candidates in India. Varies by state: usually an objective screening test in statistics and general studies, some with a descriptive paper and interview.
Official site: mospi.gov.in.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
How to estimate well and know it: sufficiency and completeness, unbiasedness and minimum variance, the Cramer-Rao bound, the Rao-Blackwell and Lehmann-Scheffe theorems, the methods of moments, maximum likelihood and minimum chi-square, and confidence intervals.
Our 32 State statistical services questions in this subject: 16 easy, 8 medium, 8 hard, across 11 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to State statistical services and are not shown on any other exam's page.
For large normal samples, what is the efficiency of the sample median relative to the sample mean as an estimator of μ?
D. 0.637
Var(median) ≈ πσ²/(2n) and Var(mean) = σ²/n, so efficiency = (σ²/n)/(πσ²/(2n)) = 2/π ≈ 0.637. 1.571 is the inverse (how much larger the median's variance is).
X₁, ..., Xₙ are iid N(θ, θ²), θ > 0. Which statement about the minimal sufficient statistic T = (ΣXᵢ, ΣXᵢ²) is correct?
C. It is minimal sufficient but not complete, since the family is a curved exponential family
E[2(ΣX)² − (n + 1)ΣX²] = 2(nθ² + n²θ²) − (n + 1)(2nθ²) = 0 for all θ, a non-zero function with zero mean, so T is not complete. A two-dimensional statistic for a one-dimensional parameter (curved family) need not be complete.
In 10 Bernoulli trials there are 4 successes. What is the UMVUE estimate of p(1 − p)?
A. 0.2667
UMVUE = nX̄(1 − X̄)/(n − 1) = 10 × 0.4 × 0.6/9 = 0.2667. The plug-in 0.24 is the MLE, biased downward by (n − 1)/n.
A sample of 18 is drawn from N(μ, σ²) with μ known and σ² = 9. What is the Cramér-Rao lower bound for an unbiased estimator of σ²?
B. 9.0
I(σ²) = 1/(2σ⁴) per observation, bound = 2σ⁴/n = 162/18 = 9.0, attained by Σ(Xᵢ − μ)²/n. 2σ⁴/(n − 1) = 9.53 is the variance of s² when μ is unknown.
For a normal sample of size 10 with μ unknown, what is the efficiency of s² relative to the Cramér-Rao bound 2σ⁴/n for estimating σ²?
A. 0.9
Var(s²) = 2σ⁴/(n − 1), so efficiency = (2σ⁴/n)/(2σ⁴/(n − 1)) = (n − 1)/n = 0.9. s² is nevertheless the UMVUE: the bound is not attainable when μ is unknown.
Counts follow binomial(n, p) with both n and p unknown. The sample mean is 6 and the sample variance 2.4. What are the moment estimates?
D. n = 10, p = 0.6
np = 6 and np(1 − p) = 2.4 give 1 − p = 0.4, p = 0.6 and n = X̄²/(X̄ − S²) = 36/3.6 = 10. Taking p = 0.4 confuses p and q; n = 6 confuses n with the mean.
From 100 seeds, 30 germinate. Using the asymptotic variance of the MLE, 1/[nI(p)], what is the estimated standard error of p̂?
D. 0.0458
1/[nI(p̂)] = p̂(1 − p̂)/n = 0.21/100 = 0.0021; SE = √0.0021 = 0.0458. 0.0021 is the variance, not the standard error.
In the Neyman-Scott problem, pairs (Xᵢ₁, Xᵢ₂), i = 1, ..., n, are independent N(μᵢ, σ²), each pair with its own mean. As n → ∞, the MLE of σ² converges to:
A. σ²/2
The MLE is Σᵢ Σⱼ(Xᵢⱼ − X̄ᵢ)²/(2n), whose expectation is nσ²/(2n) = σ²/2 for every n; it converges to σ²/2, so it is inconsistent. The number of nuisance parameters grows with n, violating the usual conditions. The divisor n (one df per pair) fixes it.
How many farms must be surveyed to estimate an adoption proportion within ±0.05 with 95% confidence, when nothing is known about p?
A. 385
n = 1.96² p(1 − p)/d² with the worst case p = 0.5: 3.8416 × 0.25/0.0025 = 384.2, so 385. 2000 is the Chebyshev requirement; 20 forgets to square; 1537 omits the factor p(1 − p) = 0.25.
A Poisson rate is estimated by X̄ from n counts. Using the delta method on the log scale, which 95% interval for λ results?
C. X̄ exp(±1.96/√(nX̄))
SE(log X̄) ≈ SE(X̄)/X̄ = √(X̄/n)/X̄ = 1/√(nX̄). The interval log X̄ ± 1.96/√(nX̄) back-transforms to X̄ exp(±1.96/√(nX̄)), which is always positive. X̄ ± 1.96√(X̄/n) is the Wald interval on the original scale.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.