LAISHA
Open Laisha

ICAR AIEEA-PG Agricultural Production Economics: practice questions

ICAR AIEEA-PG (Master's admission and PG scholarship) · India · National Testing Agency for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
71written to this exam in this subject
14syllabus units

About ICAR AIEEA-PG

ICAR AIEEA-PG (Master's admission and PG scholarship) is a postgraduate admission exam run by National Testing Agency for ICAR, for candidates in India. Computer-based test, 120 minutes, 120 MCQs, +4 / -1 / 0 for unattempted, English only. 2026 exam on 4 July 2026. Fills 30% of Master's seats at agricultural universities.

Source: cdnbbsr.s3waas.gov.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Agricultural Production Economics in ICAR AIEEA-PG

The three relationships and which question each answers; TPP, APP, MPP and elasticity of production; stages of production and where the rational stage lies; MVP = MFC and MC = MR as the optimum; isoquant and PPC properties; types of enterprise relationship. One-step numericals from a response schedule or a quadratic.

The economics of turning inputs into farm output: production functions, the three basic relationships, optimum input use, efficiency, scale and risk.

Our 71 ICAR AIEEA-PG questions in this subject: 36 easy, 35 medium, 0 hard, across 14 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AIEEA-PG and are not shown on any other exam's page.

Question 1 · easy

Using the same schedule (0 units: 0 q, 1 units: 10 q, 2 units: 26 q, 3 units: 40 q, 4 units: 50 q, 5 units: 56 q, 6 units: 58 q, 7 units: 57 q), the average physical product at 5 units of input is

  1. 6 q
  2. 11.2 q
  3. 56 q
  4. 9.67 q
Answer and working

B. 11.2 q

APP = TPP/X = 56/5 = 11.2 q. 6 q is the MPP of the 5th unit (56 - 50), and 9.67 q is APP at 6 units.

Question 2 · medium

Why does a rational farmer not operate in stage I for the variable input?

  1. Because APP is still rising, so if it pays to use the input at all, it pays to use more
  2. Because total product is already falling as each additional unit of the variable input is applied
  3. Because marginal product is negative there, so extra input reduces total output
  4. Because the input is free
Answer and working

A. Because APP is still rising, so if it pays to use the input at all, it pays to use more

In stage I Ep > 1: each unit adds more than the average, so returns per unit of input are increasing and more input raises profit per unit. TPP falling and negative MPP describe stage III, not stage I.

Question 3 · medium

A nitrogen trial gives Y = 2500 + 20N - 0.1N^2, with Y in kg grain/ha and N in kg/ha. Grain sells at 15 per kg and nitrogen costs 60 per kg. The economic optimum dose is

  1. 100 kg N/ha
  2. 98.8 kg N/ha
  3. 80 kg N/ha
  4. 160 kg N/ha
Answer and working

C. 80 kg N/ha

MPP = 20 - 0.2N. Set MPP = Px/Py = 60/15 = 4: 20 - 0.2N = 4, N = 16/0.2 = 80. The agronomic maximum is 100 kg (MPP = 0); inverting the price ratio gives 98.8 kg; forgetting the 2 in the derivative gives 160 kg.

Question 4 · medium

Combinations (X1, X2) on one isoquant are (2,20); (3,14); (4,10); (5,8); (6,7). X1 costs 30 and X2 costs 10 per unit. The least-cost combination is

  1. (5,8)
  2. (2,20)
  3. (6,7)
  4. (4,10)
Answer and working

D. (4,10)

Total costs are 260, 230, 220, 230, 250; the minimum 220 is at (4,10). Equivalently, substitute X1 for X2 while the MRTS (6, 4, 2, 1) exceeds P1/P2 = 3; the step to (5,8) replaces only 2 units of X2, worth less than one unit of X1. (6,7) keeps substituting until MRTS falls to 1, ignoring the price ratio, and costs 250.

Question 5 · medium

At the least-cost combination, MPP of X1 is 12 kg and MPP of X2 is 4 kg. If X1 costs 60 per unit, the price of X2 must be

  1. 180
  2. 5
  3. 20
  4. 240
Answer and working

C. 20

Least cost requires MPP1/P1 = MPP2/P2: 12/60 = 4/P2, so P2 = 4 x 60/12 = 20. Multiplying instead (60 x 12/4) gives 180. Leaving out the division by 12 gives 240; 5 is the cost per kg via X1 (60/12), not a price.

Question 6 · easy

A farm has technical efficiency 0.8 and allocative efficiency 0.9. Its economic efficiency is

  1. 0.7
  2. 0.72
  3. 0.85
  4. 0.889
Answer and working

B. 0.72

Farrell: EE = TE x AE = 0.8 x 0.9 = 0.72. Averaging (0.85) or dividing (0.889) are the usual slips. 0.7 adds the two and subtracts one.

Question 7 · easy

A stochastic frontier estimate shows that a farm could produce 60 q with its inputs, but it produces 42 q. Its output-oriented technical efficiency is

  1. 0.7
  2. 1.429
  3. 0.3
  4. 18
Answer and working

A. 0.7

TE = observed/frontier = 42/60 = 0.7. 0.3 is the inefficiency (the proportion of potential output lost); the inverse 1.429 is the Farrell output-expansion measure (the factor by which output could be raised), not an efficiency score. 18 is the output lost in quintals, not a ratio.

Question 8 · medium

Hicks-neutral technical change is one that

  1. raises the marginal product of labour more than that of capital, so it is biased toward using more labour
  2. leaves output unchanged but lowers costs by making the fixed input cheaper to hire
  3. only affects the fixed input
  4. raises both marginal products in the same proportion, leaving the MRTS unchanged at a given input ratio
Answer and working

D. raises both marginal products in the same proportion, leaving the MRTS unchanged at a given input ratio

Hicks (1932) defined neutrality by an unchanged MRTS at a constant input ratio: isoquants move inward without changing shape. Raising MP of labour relatively more would be capital-saving (labour-using) change.

Question 9 · medium

For a risk-averse decision maker, the certainty equivalent of a risky prospect is

  1. greater than its expected monetary value
  2. exactly equal to its expected monetary value
  3. always equal to the worst possible outcome
  4. less than its expected monetary value
Answer and working

D. less than its expected monetary value

A concave utility function means the sure sum giving the same utility is below the expected value; the gap is the risk premium. Equality holds only for risk neutrality.

Question 10 · medium

Schultz's argument in Transforming Traditional Agriculture (1964) is summarised as

  1. traditional farmers are inefficient and need better management training and extension visits
  2. peasants do not respond to prices
  3. traditional farmers are poor but efficient, so growth needs new technology, not reallocation
  4. surplus labour can be withdrawn at no cost
Answer and working

C. traditional farmers are poor but efficient, so growth needs new technology, not reallocation

Schultz held that farmers allocate traditional inputs efficiently, so gains must come from new, more productive inputs. The claim that farmers are price-unresponsive is what he rejected.

A study plan for Agricultural Production Economics in ICAR AIEEA-PG

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (48% of the 71 questions): Factor-product relationship (7, 10%); Optimum input use: MVP equals MFC (7, 10%); Product-product relationship (7, 10%); Types of risk and enterprise combination under risk (7, 10%); Forms of production function and their estimation (6, 8%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Law of variable proportions and the three stages of production (6, 8%); Cost minimisation (5, 7%); Factor-factor relationship (5, 7%); Scope of production economics compared with farm management (5, 7%); Economies of scale and size (4, 6%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Isoquants and isoclines (4, 6%); Technical and allocative efficiency and production frontiers (3, 4%); Technological change (3, 4%); Theory of the family farm (2, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Bank the easy marks: Technical and allocative efficiency and production frontiers (3 easy of 3); Economies of scale and size (3 easy of 4).

    Do these early in revision so they are fast on the day.

  5. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AIEEA-PG Agricultural Production Economics

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.