LAISHA
Open Laisha

FSSAI Food Analyst Examination Chemistry for Food Science (General, Organic & Physical): practice questions

FSSAI Food Analyst Examination (and Junior Analyst Examination) · India · Food Safety and Standards Authority of India

Original practice questions written to the published syllabus · not past papers
10worked here, free
18written to this exam in this subject
8syllabus units

About FSSAI Food Analyst Examination

FSSAI Food Analyst Examination (and Junior Analyst Examination) is a licensing and registration exam run by Food Safety and Standards Authority of India, for candidates in India. A computer-based multiple-choice test in either the Chemical or the Biological discipline (+4 for a correct answer, -1 for a wrong one, 50% to qualify), then a practical examination, document verification and two weeks of compulsory training (11th Food Analyst Examination, FSSAI).

Source: sites.fssai.gov.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Chemistry for Food Science (General, Organic & Physical) in FSSAI Food Analyst Examination

The chemistry a food scientist uses every day: bonding, acids and bases, buffers, organic functional groups and reaction mechanisms, chemical kinetics and thermodynamics, and the physical chemistry of solutions, surfaces and colloids. Students who take GATE XL (Life Sciences) sit a compulsory chemistry section alongside the Food Technology section.

Our 18 FSSAI Food Analyst Examination questions in this subject: 7 easy, 10 medium, 1 hard, across 8 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to FSSAI Food Analyst Examination and are not shown on any other exam's page.

Question 1 · medium

How does isotope-ratio mass spectrometry detect cane sugar added to a fruit juice?

  1. C4 plants such as cane fix carbon with a different ¹³C/¹²C ratio from the C3 fruit
  2. Cane sugar has a different molecular formula from the sugars made by fruit
  3. Cane sugar contains radioactive ¹⁴C, while fruit sugars contain none at all
  4. Added sugar lowers the deuterium content of the juice water to zero
Answer and working

A. C4 plants such as cane fix carbon with a different ¹³C/¹²C ratio from the C3 fruit

Plants using the C4 pathway (cane, maize) discriminate less against ¹³C than C3 plants (most fruit), so their sugars have a measurably higher ¹³C/¹²C ratio. Both contain ¹⁴C from the atmosphere; sucrose is the same molecule whatever its source; deuterium ratios are used too, but they shift, not vanish.

Question 2 · medium

A 10.0 g sample of juice needs 12.0 mL of 0.1 N NaOH to reach the phenolphthalein end point. What is its titratable acidity as anhydrous citric acid (meq. factor 0.064)?

  1. 1.080%
  2. 0.077%
  3. 7.680%
  4. 0.768%
Answer and working

D. 0.768%

Acidity = V × N × meq × 100/mass = 12.0 × 0.1 × 0.064 × 100/10 = 0.768%. 1.080% uses the lactic acid factor (0.090); 7.680% forgets to divide by the 10 g sample mass; 0.077% slips the decimal point by a factor of ten.

Question 3 · medium

What is the normality of a 0.5 M sulphuric acid solution when used as an acid in neutralisation?

  1. 2.0 N
  2. 0.25 N
  3. 1.0 N
  4. 0.5 N
Answer and working

C. 1.0 N

H₂SO₄ supplies two protons per molecule, so 1 mol = 2 equivalents and 0.5 M = 1.0 N. 0.5 N treats it as monoprotic; 0.25 N divides by 2 instead of multiplying; 2.0 N doubles twice.

Question 4 · easy

Why is sodium hydroxide not used as a primary standard?

  1. It reacts too slowly with most acids
  2. Its molar mass is too high for accurate weighing
  3. It is too expensive for routine laboratory use
  4. It absorbs water and carbon dioxide from the air
Answer and working

D. It absorbs water and carbon dioxide from the air

Solid NaOH is hygroscopic and reacts with atmospheric CO₂ to form carbonate, so its weighed mass does not give its true amount; its solutions are standardised against potassium hydrogen phthalate. It is cheap, reacts instantly with acids, and has a low molar mass (40 g/mol), which is itself a disadvantage, not an advantage.

Question 5 · medium

In the Mohr titration for salt, what signals the end point?

  1. A red-brown silver chromate precipitate after all chloride has precipitated
  2. A blue colour formed when starch meets the first trace of free iodine
  3. The disappearance of the pink colour of phenolphthalein from the sample
  4. A white precipitate of silver chloride appearing with the first drop
Answer and working

A. A red-brown silver chromate precipitate after all chloride has precipitated

Silver chloride (less soluble) precipitates first; once chloride is used up, the first excess of Ag⁺ forms red-brown Ag₂CrO₄ with the chromate indicator. The white AgCl precipitate forms throughout, so it does not mark the end point; starch-iodine and phenolphthalein belong to other titrations.

Question 6 · medium

A sucrose solution of 0.05 g/mL in a 2 dm polarimeter tube gives an observed rotation of +6.65°. What is the specific rotation?

  1. +133°
  2. +66.5°
  3. +3.3°
  4. +6.65°
Answer and working

B. +66.5°

[α] = α/(l·c) = 6.65/(2 × 0.05) = +66.5°. +133° divides only by the concentration and forgets the 2 dm tube length; +3.3° divides only by the length; +6.65° reports the observed rotation as if it were the specific rotation.

Question 7 · medium

How does chiral gas chromatography help detect undeclared synthetic flavour in a product labelled as natural?

  1. Chiral columns separate compounds by molecular mass alone
  2. Synthetic flavours rotate polarised light much more strongly than natural ones
  3. Biosynthesis tends to give one enantiomer, synthesis a racemate
  4. Natural flavours contain no chiral centres, unlike synthetic ones
Answer and working

C. Biosynthesis tends to give one enantiomer, synthesis a racemate

Biosynthesis by enzymes typically gives an excess of one enantiomer; chemical synthesis without a chiral catalyst gives a racemate. A chiral stationary phase separates the enantiomers so their ratio can be compared with authentic references. Racemates show no net rotation; natural flavours are often chiral; chiral columns separate by stereochemistry.

Question 8 · medium

Which titrant is used in the iodometric determination of the peroxide value of fats?

  1. EDTA
  2. Potassium hydroxide
  3. Silver nitrate
  4. Sodium thiosulphate
Answer and working

D. Sodium thiosulphate

Hydroperoxides oxidise iodide to iodine, which is titrated with standard sodium thiosulphate using starch indicator. Silver nitrate is for chloride, EDTA for metal ions, KOH for acid and saponification values.

Question 9 · medium

How many donor atoms does EDTA use when binding a metal ion in a typical 1 : 1 complex?

  1. 6
  2. 8
  3. 2
  4. 4
Answer and working

A. 6

EDTA is hexadentate: two amine nitrogens and four carboxylate oxygens. It forms 1 : 1 complexes with most divalent and trivalent ions, the basis of complexometric titrations.

Question 10 · easy

Which indicator is used in the EDTA titration of water hardness?

  1. Eriochrome Black T
  2. Phenolphthalein
  3. Potassium chromate
  4. Starch
Answer and working

A. Eriochrome Black T

Eriochrome Black T forms a wine-red complex with Ca²⁺ and Mg²⁺ and turns blue when EDTA has bound all the metal, at pH about 10. Phenolphthalein is an acid-base indicator, starch detects iodine, and chromate is the Mohr indicator.

A study plan for Chemistry for Food Science (General, Organic & Physical) in FSSAI Food Analyst Examination

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (67% of the 18 questions): Stoichiometry, concentration units and solution preparation (7, 39%); Electrochemistry and redox potential (3, 17%); Coordination chemistry and metal ions in foods (2, 11%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Stereochemistry and optical activity (2, 11%); Acids, bases, pH, buffers and the Henderson-Hasselbalch equation (1, 6%); Atomic structure, periodicity and chemical bonding (1, 6%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Chemical equilibrium and solubility (1, 6%); Colligative properties: freezing-point depression, boiling-point elevation and osmotic pressure (1, 6%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Stoichiometry, concentration units and solution preparation (1 hard of 7).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Acids, bases, pH, buffers and the Henderson-Hasselbalch equation (1 easy of 1); Stoichiometry, concentration units and solution preparation (4 easy of 7).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — FSSAI Food Analyst Examination Chemistry for Food Science (General, Organic & Physical)

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.