LAISHA
Open Laisha

ICAR AIEEA-PG Remote Sensing & Photogrammetry for Forestry: practice questions

ICAR AIEEA-PG — Forestry/Agroforestry & Silviculture (Major Subject Group 09) · India · National Testing Agency for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
31written to this exam in this subject
11syllabus units

About ICAR AIEEA-PG

ICAR AIEEA-PG — Forestry/Agroforestry & Silviculture (Major Subject Group 09) is a postgraduate admission exam run by National Testing Agency for ICAR, for candidates in India. Computer-based, 120 minutes, 120 MCQs, +4 / −1, English only. One paper for the whole subject group.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Remote Sensing & Photogrammetry for Forestry in ICAR AIEEA-PG

Reading the forest from above: aerial photographs and satellite images, spectral behaviour of vegetation, image classification, change detection and forest-cover monitoring.

Our 31 ICAR AIEEA-PG questions in this subject: 11 easy, 19 medium, 1 hard, across 11 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AIEEA-PG and are not shown on any other exam's page.

Question 1 · easy

Forward overlap (endlap) between successive vertical photos for stereo viewing is usually about:

  1. 10%
  2. 30%
  3. 90%
  4. 60%
Answer and working

D. 60%

About 60% forward overlap puts every point on at least two photos; side overlap is about 20–30%.

Question 2 · hard

On a vertical photo flown 1,200 m above the base of a tree, the top lies 80 mm from the principal point and is displaced 2 mm. Using h = d × H ÷ r, how tall is the tree?

  1. 30 m
  2. 133 m
  3. 15 m
  4. 29.3 m
Answer and working

A. 30 m

Relief displacement: h = d × H ÷ r = 2 mm × 1,200 m ÷ 80 mm = 30 m. 133 m inverts d and r; 15 m halves H by mistake.

Question 3 · medium

The visual roughness of a canopy made by crowns and their shadows is called:

  1. Tone, the relative brightness of an area
  2. Pattern, the arrangement of objects in space
  3. Site, the position in the landscape
  4. Texture
Answer and working

D. Texture

Texture is fine in young plantations and coarse in old uneven natural forest.

Question 4 · medium

How many brightness levels can an 11-bit sensor record?

  1. 22
  2. 1,024
  3. 4,096
  4. 2,048
Answer and working

D. 2,048

2¹¹ = 2,048 levels. 22 multiplies 2 × 11 instead of raising 2 to the 11th power; 1,024 is 10-bit and 4,096 is 12-bit.

Question 5 · medium

Hyperspectral sensors are distinguished by:

  1. A single broad panchromatic band
  2. Radar bands at several wavelengths
  3. Hundreds of narrow, contiguous bands
  4. Pixels always smaller than 1 m
Answer and working

C. Hundreds of narrow, contiguous bands

Narrow contiguous bands help separate species and canopy chemistry.

Question 6 · medium

Of 100 reference forest points, 90 are mapped as forest. The map shows 95 forest points, of which those 90 are truly forest. What are producer's and user's accuracy for forest?

  1. 94.7% and 90%
  2. 90% and 90%
  3. 90% and 94.7%
  4. 10% and 5.3%
Answer and working

C. 90% and 94.7%

Producer's = 90 ÷ 100 = 90%; user's = 90 ÷ 95 = 94.7%.

Question 7 · easy

Image differencing for change detection involves:

  1. Classifying a single image only
  2. Subtracting values between dates
  3. Adding the thermal band to radar
  4. Measuring parallax on photos
Answer and working

B. Subtracting values between dates

Image differencing subtracts pixel values (or an index such as NDVI) of one date from another; a threshold on the difference then separates change from no change. Classifying a single image cannot show change on its own.

Question 8 · medium

The grainy noise in SAR images is called:

  1. Speckle
  2. Layover from steep slopes
  3. Haze from water vapour
  4. Relief displacement
Answer and working

A. Speckle

It comes from interference among many scatterers in a pixel and is reduced by multi-looking or filtering.

Question 9 · medium

VIIRS active-fire detections have a resolution of about:

  1. 375 m
  2. 30 m
  3. 1 km
  4. 10 m
Answer and working

A. 375 m

VIIRS active-fire products are at 375 m, finer than MODIS active fires at 1 km. 30 m and 10 m are Landsat and Sentinel-2 class resolutions, used for burned-area mapping rather than daily active-fire detection.

Question 10 · easy

NASA's FIRMS system distributes:

  1. Near-real-time active-fire detections
  2. Annual deforestation maps
  3. Soil moisture maps from radar
  4. Soil maps
Answer and working

A. Near-real-time active-fire detections

FIRMS (Fire Information for Resource Management System) distributes MODIS and VIIRS active-fire detections within hours of satellite overpass. Annual Amazon deforestation maps come from Brazil's PRODES, not FIRMS.

A study plan for Remote Sensing & Photogrammetry for Forestry in ICAR AIEEA-PG

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (52% of the 31 questions): Aerial photographs: scale, stereoscopy, parallax and tree height (5, 16%); Image classification: supervised and unsupervised; accuracy assessment (4, 13%); Satellite sensors and resolutions: spatial, spectral, temporal, radiometric (4, 13%); Drones (UAVs) for forest survey (3, 10%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Electromagnetic spectrum and spectral signatures of vegetation (3, 10%); Forest cover and change detection (3, 10%); Fire detection and burned-area mapping (2, 6%); Photo-interpretation keys for forest types (2, 6%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Radar (SAR) in forestry (2, 6%); Vegetation indices (NDVI and others) (2, 6%); National forest-cover monitoring systems (1, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Aerial photographs: scale, stereoscopy, parallax and tree height (1 hard of 5).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Fire detection and burned-area mapping (1 easy of 2); Photo-interpretation keys for forest types (1 easy of 2).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AIEEA-PG Remote Sensing & Photogrammetry for Forestry

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.