LAISHA
Open Laisha

ICAR AICE-JRF/SRF Remote Sensing & Photogrammetry for Forestry: practice questions

ICAR AICE-JRF/SRF (PhD) — Subject 59 Forestry · India · National Testing Agency for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
37written to this exam in this subject
11syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF (PhD) — Subject 59 Forestry is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. Computer-based, 2 hours, 120 MCQs (Part A 20 general; Part B 50 core group; Part C 50 subject), +4 / −1, maximum 480.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Remote Sensing & Photogrammetry for Forestry in ICAR AICE-JRF/SRF

Reading the forest from above: aerial photographs and satellite images, spectral behaviour of vegetation, image classification, change detection and forest-cover monitoring.

Our 37 ICAR AICE-JRF/SRF questions in this subject: 0 easy, 17 medium, 20 hard, across 11 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · medium

The 'red edge' in a vegetation spectrum is:

  1. The trough in reflectance caused by water at 1.45 µm
  2. The peak of reflectance in the green near 0.55 µm
  3. The steep rise in reflectance from red to NIR
  4. The fall in emitted energy beyond the thermal band
Answer and working

C. The steep rise in reflectance from red to NIR

Its position shifts to shorter wavelengths when chlorophyll falls or the plant is stressed.

Question 2 · medium

As a leaf dries, its reflectance in the shortwave infrared:

  1. Decreases, because dry tissue absorbs more energy
  2. Stays the same, since SWIR responds only to pigments
  3. Becomes negative across the whole region
  4. Increases
Answer and working

D. Increases

SWIR has water-absorption features near 1.45 and 1.94 µm; less water means more reflectance.

Question 3 · hard

Why is the relief displacement method of height measurement poorly suited to closed-canopy forest?

  1. Tree bases are hidden
  2. It needs a stereo pair of photos
  3. It works only near the principal point
  4. It needs radar
Answer and working

A. Tree bases are hidden

The displacement d is measured from base to top, so the base must be visible; parallax is preferred in closed canopy.

Question 4 · medium

An elimination (dichotomous) interpretation key:

  1. Leads from general to specific choices
  2. Shows example images for each class to match
  3. Uses only colour to separate classes
  4. Is valid for every region and season
Answer and working

A. Leads from general to specific choices

Like a botanical key; selective keys instead present examples to match.

Question 5 · hard

Photo-interpreted stand maps are most directly used in forest inventory to:

  1. Replace all field measurements of trees
  2. Measure DBH
  3. Stratify field plots
  4. Calibrate radar backscatter models
Answer and working

C. Stratify field plots

Strata of similar type, density and height reduce sampling error; see forest-inventory-sampling.

Question 6 · medium

Commission error for 'forest' is:

  1. Mapped forest that is not forest
  2. True forest that the map missed
  3. The total area of forest on the map
  4. The difference between two image dates
Answer and working

A. Mapped forest that is not forest

Commission error is the share of map 'forest' that the reference data show is not forest: the map committed it wrongly to the class. It is 1 − user's accuracy. Forest that the map missed is omission error, the complement of producer's accuracy.

Question 7 · medium

A drawback of post-classification comparison for change detection is that:

  1. It gives no from-to information
  2. It needs one date
  3. Errors of both maps combine
  4. It cannot be used with Landsat
Answer and working

C. Errors of both maps combine

It does give from-to classes, but its accuracy is limited by both classifications.

Question 8 · medium

Which polarisation is generally most sensitive to forest biomass?

  1. VV only
  2. Circular polarisation at X-band
  3. Like-polarised HH at C-band
  4. Cross-polarised HV
Answer and working

D. Cross-polarised HV

Cross-polarised backscatter comes from volume scattering in branches and foliage.

Question 9 · hard

Flooded forests and mangroves often appear bright in L-band HH images because of:

  1. Thermal emission from warm water
  2. Chlorophyll fluorescence
  3. Double-bounce scattering
  4. Atmospheric Rayleigh scattering
Answer and working

C. Double-bounce scattering

Signals bounce between trunks and the smooth water surface back to the sensor.

Question 10 · medium

Collect Earth and SEPAL, promoted by FAO, are tools for:

  1. Sawmill recovery calculation
  2. Calculating sawmill recovery and conversion losses
  3. Wildlife census
  4. Sample-based and cloud-based forest monitoring
Answer and working

D. Sample-based and cloud-based forest monitoring

Visual interpretation of sample plots on high-resolution imagery and cloud processing.

A study plan for Remote Sensing & Photogrammetry for Forestry in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (49% of the 37 questions): Image classification: supervised and unsupervised; accuracy assessment (5, 14%); Radar (SAR) in forestry (5, 14%); National forest-cover monitoring systems (4, 11%); Vegetation indices (NDVI and others) (4, 11%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Aerial photographs: scale, stereoscopy, parallax and tree height (3, 8%); Electromagnetic spectrum and spectral signatures of vegetation (3, 8%); Fire detection and burned-area mapping (3, 8%); Forest cover and change detection (3, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Photo-interpretation keys for forest types (3, 8%); Drones (UAVs) for forest survey (2, 5%); Satellite sensors and resolutions: spatial, spectral, temporal, radiometric (2, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: National forest-cover monitoring systems (3 hard of 4), Aerial photographs: scale, stereoscopy, parallax and tree height (2 hard of 3), Fire detection and burned-area mapping (2 hard of 3).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Remote Sensing & Photogrammetry for Forestry

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.