LAISHA
Open Laisha

ICAR AICE-JRF/SRF Vegetative Propagation & Forest Biotechnology: practice questions

ICAR AICE-JRF/SRF (PhD) — Subject 59 Forestry · India · National Testing Agency for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
57written to this exam in this subject
9syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF (PhD) — Subject 59 Forestry is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. Computer-based, 2 hours, 120 MCQs (Part A 20 general; Part B 50 core group; Part C 50 subject), +4 / −1, maximum 480.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Vegetative Propagation & Forest Biotechnology in ICAR AICE-JRF/SRF

Producing trees without seed and using biotechnology in forestry: cuttings, grafting, layering, tissue culture, and the molecular tools used in tree breeding and timber identification.

Our 57 ICAR AICE-JRF/SRF questions in this subject: 6 easy, 26 medium, 25 hard, across 9 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · medium

Cuttings from side branches of Araucaria grow horizontally like branches for years. This is:

  1. Cyclophysis
  2. Topophysis
  3. Somaclonal variation
  4. Apical dominance
Answer and working

B. Topophysis

Topophysis is the persistence of traits linked to the propagule's position of origin.

Question 2 · hard

A difficult-to-root species fails with every IBA dose tested on crown cuttings. What should be tried first?

  1. A tenfold higher IBA dose on crown cuttings
  2. Cytokinin instead of auxin on the cuttings
  3. Full-sun rooting beds without humidity
  4. Juvenile, hedged stock material
Answer and working

D. Juvenile, hedged stock material

Stock plant maturation is usually the limiting factor; rejuvenated material roots far better.

Question 3 · medium

IBA is often first dissolved in ethanol or alkali, or used as its potassium salt, because:

  1. Ethanol increases auxin activity tenfold
  2. The acid dissolves poorly in water
  3. Water destroys IBA instantly
  4. Potassium is the active rooting agent
Answer and working

B. The acid dissolves poorly in water

IBA has low water solubility; K-IBA is water-soluble.

Question 4 · medium

For a graft to succeed, the most critical anatomical requirement is:

  1. Matching bark colour of the partners
  2. Equal leaf number on scion and stock
  3. Contact between the two piths
  4. Close contact between the cambia
Answer and working

D. Close contact between the cambia

Callus from both cambia bridges the union and forms new vascular tissue.

Question 5 · easy

Which bacterium is most commonly used to transfer genes into forest trees?

  1. Bacillus thuringiensis
  2. Agrobacterium tumefaciens
  3. Rhizobium leguminosarum
  4. Escherichia coli
Answer and working

B. Agrobacterium tumefaciens

Its Ti plasmid T-DNA is inserted into the plant genome; Bt supplies insecticidal genes.

Question 6 · medium

Which international agreement governs transboundary movement of living modified organisms?

  1. Kyoto Protocol
  2. Nagoya Protocol
  3. Montreal Protocol
  4. Cartagena Protocol
Answer and working

D. Cartagena Protocol

Cartagena (2000, in force 2003) under the CBD; Nagoya deals with access and benefit sharing.

Question 7 · hard

Barcoding fails to separate some closely related rosewood species because:

  1. Their wood contains no plastids at all
  2. Rosewood DNA cannot be amplified
  3. Barcode libraries list only animals
  4. Their plastid DNA is near-identical
Answer and working

D. Their plastid DNA is near-identical

Recent divergence and hybridisation leave little plastid variation; more markers are needed.

Question 8 · medium

Which strategy aims to prevent spread of transgenes from GM plantations?

  1. Engineered sterility
  2. Larger plantation area
  3. Longer rotations
  4. Planting near native stands
Answer and working

A. Engineered sterility

Sterility blocks pollen and seed; longer rotations and nearby relatives increase risk.

Question 9 · easy

Most biotechnology used in forestry today, such as tissue culture and molecular markers, is:

  1. Banned under certification
  2. Limited to GM trees
  3. Regulated as LMOs
  4. Not genetic modification
Answer and working

D. Not genetic modification

These tools do not alter genomes and are widely accepted.

Question 10 · hard

Under a product-based regulatory approach, a gene-edited tree containing no foreign DNA is judged mainly on:

  1. The fact that a laboratory technique was used, whatever the result
  2. The traits of the final plant, not the technique used to make it
  3. The weight of its seed compared with the average for its species
  4. The number of laboratories that took part in producing it
Answer and working

B. The traits of the final plant, not the technique used to make it

Product-based systems regulate the characteristics of the organism; process-based systems regulate because a GM technique was used. Countries differ on which approach they follow for gene-edited plants.

A study plan for Vegetative Propagation & Forest Biotechnology in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (56% of the 57 questions): Tissue culture: media, micropropagation, somatic embryogenesis (12, 21%); Biosafety and acceptance of genetically modified trees (10, 18%); Genetic transformation of forest trees and its regulation (10, 18%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: DNA barcoding and timber species identification (5, 9%); Principles of vegetative propagation (5, 9%); Rooting of cuttings: hormones, mist chambers, juvenility (5, 9%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Grafting and budding techniques (4, 7%); Air layering and other layering methods (3, 5%); Clonal nurseries and mini-cutting systems (3, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Clonal nurseries and mini-cutting systems (3 hard of 3), Air layering and other layering methods (2 hard of 3), Grafting and budding techniques (2 hard of 4).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Tissue culture: media, micropropagation, somatic embryogenesis (3 easy of 12); DNA barcoding and timber species identification (1 easy of 5).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Vegetative Propagation & Forest Biotechnology

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.