LAISHA
Open Laisha

TNPSC Animal Husbandry & Veterinary Science, Code 396 Meat Science, Abattoir Practice & Animal By-products Technology: practice questions

TNPSC Animal Husbandry & Veterinary Science (Degree Standard), Code 396 · India · Tamil Nadu Public Service Commission

Original practice questions written to the published syllabus · not past papers
10worked here, free
34written to this exam in this subject
11syllabus units

About TNPSC Animal Husbandry & Veterinary Science, Code 396

TNPSC Animal Husbandry & Veterinary Science (Degree Standard), Code 396 is a government recruitment exam run by Tamil Nadu Public Service Commission, for candidates in India. 200 questions.

Source: tnpsc.gov.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Meat Science, Abattoir Practice & Animal By-products Technology in TNPSC Animal Husbandry & Veterinary Science, Code 396

From live animal to packaged meat: abattoir design, stunning and slaughter, carcass fabrication, the conversion of muscle to meat, meat and poultry products, and by-products including wool.

Our 34 TNPSC Animal Husbandry & Veterinary Science, Code 396 questions in this subject: 32 easy, 2 medium, 0 hard, across 11 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to TNPSC Animal Husbandry & Veterinary Science, Code 396 and are not shown on any other exam's page.

Question 1 · easy

The connective tissue sheath that surrounds each individual muscle fibre is the:

  1. Endomysium
  2. Epimysium
  3. Perimysium
  4. Sarcolemma
Answer and working

A. Endomysium

Endomysium wraps each fibre, perimysium wraps bundles (fasciculi) and epimysium wraps the whole muscle. The sarcolemma is the fibre's cell membrane, not a connective tissue sheath.

Question 2 · easy

Wall-floor junctions in a slaughter hall are coved mainly to:

  1. Reduce noise from machinery
  2. Strengthen the walls against impact from carcasses moving on the rail
  3. Prevent accumulation of dirt and make cleaning effective
  4. Direct blood to the bleeding trough
Answer and working

C. Prevent accumulation of dirt and make cleaning effective

Coving removes the right-angled corner where organic matter lodges and bacteria survive cleaning. It is a hygiene measure, not structural or acoustic.

Question 3 · easy

The recommended frontal position for captive bolt stunning of hornless or horned cattle is:

  1. Between the eyes, on a horizontal line joining the centres of the two eyes
  2. At the temple, just behind the eye
  3. On the midline where lines from each eye to the base of the opposite horn cross
  4. Behind the poll, aimed toward the throat, as recommended for all adult horned cattle
Answer and working

C. On the midline where lines from each eye to the base of the opposite horn cross

The frontal position lies on the midline at the crossing of the eye-to-opposite-horn lines, aimed along the axis of the brain. The poll position is used for heavily horned sheep and goats; the level of the eyes is too low and misses the brain.

Question 4 · easy

Jhatka slaughter is characterised by:

  1. Stunning with carbon dioxide before bleeding
  2. A single uninterrupted neck cut by a shochet
  3. Severing the head with a single blow
  4. A neck cut by a Muslim slaughterman with invocation
Answer and working

C. Severing the head with a single blow

Jhatka, practised by Sikhs and many Hindus, kills by a single blow that severs the head. The halal (dhabiha) and shechita descriptions belong to Islamic and Jewish slaughter.

Question 5 · easy

In Jewish ritual slaughter (shechita), the knife is called the:

  1. Shochet
  2. Bedikah
  3. Chalaf
  4. Tasmiyah
Answer and working

C. Chalaf

The chalaf is the long, very sharp, smooth-edged knife. The shochet is the slaughterer; bedikah is the inspection of the organs (especially the lungs) after slaughter; tasmiyah is the Islamic invocation.

Question 6 · easy

A steer weighing 520 kg live yields a hot carcass of 296 kg. What is its dressing percentage on a hot carcass basis?

  1. 43.1 percent
  2. 55.8 percent
  3. 56.9 percent
  4. 175.7 percent
Answer and working

C. 56.9 percent

Dressing percentage = hot carcass / live weight x 100 = 296/520 x 100 = 56.9 percent. 175.7 inverts the ratio; 43.1 is the non-carcass fraction; 55.8 would be the cold basis for a 290 kg cold carcass.

Question 7 · easy

In the North American system, a beef side is divided into forequarter and hindquarter between:

  1. The 8th and 9th ribs
  2. The last rib and the first lumbar vertebra
  3. The 5th and 6th ribs
  4. The 12th and 13th ribs
Answer and working

D. The 12th and 13th ribs

US beef is ribbed between the 12th and 13th ribs, which is also where fat thickness and ribeye area are measured for grading. Other countries quarter at different ribs.

Question 8 · easy

Before evisceration of cattle, the oesophagus is tied (rodding) and the rectum is bagged and tied (bunging) in order to:

  1. Retain blood in the offal
  2. Prevent leakage of gut contents onto the carcass
  3. Speed up rigor mortis
  4. Make the viscera easier to weigh
Answer and working

B. Prevent leakage of gut contents onto the carcass

Rumen contents and faeces are major sources of carcass contamination; sealing both ends of the gut before evisceration keeps them inside the viscera.

Question 9 · easy

Beef 'rounds' used as natural sausage casings are prepared from the:

  1. Caecum of pigs
  2. Oesophagus of sheep
  3. Large intestine of cattle
  4. Small intestine of cattle
Answer and working

D. Small intestine of cattle

In casing trade terms, beef rounds are the small intestine, beef middles the large intestine and bungs the caecum.

Question 10 · easy

The term 'hide' rather than 'skin' is applied to the pelt of:

  1. Goats
  2. Sheep
  3. Cattle and buffalo
  4. Rabbits
Answer and working

C. Cattle and buffalo

Hides come from large animals (cattle, buffalo, horses); skins from small animals (sheep, goats, calves).

A study plan for Meat Science, Abattoir Practice & Animal By-products Technology in TNPSC Animal Husbandry & Veterinary Science, Code 396

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (53% of the 34 questions): Wool, mohair and fur (6, 18%); Abattoir design (4, 12%); Conversion of muscle to meat (4, 12%); Meat products (4, 12%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Utilisation of by-products (4, 12%); Carcass fabrication (3, 9%); Slaughter methods, including religious slaughter (3, 9%); Poultry processing (2, 6%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Stunning (2, 6%); Meat marketing (1, 3%); Meat packaging (1, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Bank the easy marks: Wool, mohair and fur (6 easy of 6); Abattoir design (4 easy of 4).

    Do these early in revision so they are fast on the day.

  5. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — TNPSC Animal Husbandry & Veterinary Science, Code 396 Meat Science, Abattoir Practice & An

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.