TNPSC Animal Husbandry & Veterinary Science (Degree Standard), Code 396 · India · Tamil Nadu Public Service Commission
Original practice questions written to the published syllabus · not past papers
10worked here, free
29written to this exam in this subject
11syllabus units
About TNPSC Animal Husbandry & Veterinary Science, Code 396
TNPSC Animal Husbandry & Veterinary Science (Degree Standard), Code 396 is a government recruitment exam run by Tamil Nadu Public Service Commission, for candidates in India. 200 questions.
Milk composition and quality testing, adulteration, heat processing, indigenous and fermented dairy products, dairy standards, packaging and quality control.
Our 29 TNPSC Animal Husbandry & Veterinary Science, Code 396 questions in this subject: 19 easy, 10 medium, 0 hard, across 11 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to TNPSC Animal Husbandry & Veterinary Science, Code 396 and are not shown on any other exam's page.
Question 1 · medium
Coliforms are detected in a sample of pasteurised milk taken from the filler. What does this most likely indicate?
Normal coliform levels for well-pasteurised milk
Survival of coliform spores through the heat treatment, as expected at 72 degrees C
Contamination after pasteurisation, at the filler or in pipes
High coliform count in the raw milk before heating
Answer and working
C. Contamination after pasteurisation, at the filler or in pipes
Coliforms are killed by pasteurisation and do not form spores, so their presence after heating points to post-process recontamination (or gross pasteuriser failure, which the phosphatase test would show).
Question 2 · easy
A drop of iodine solution added to boiled and cooled milk turns it blue. Which adulterant is present?
Sodium bicarbonate
Starch or cereal flour
Cane sugar (sucrose)
Urea
Answer and working
B. Starch or cereal flour
Iodine forms a blue complex with starch. Sucrose is detected by the resorcinol test, urea by DMAB and bicarbonate by rosalic acid.
Question 3 · easy
What are the time-temperature conditions of HTST pasteurisation of milk?
72 degrees C (161 degrees F) for 15 seconds
135 degrees C (275 degrees F) for 2 seconds
85 degrees C (185 degrees F) for 5 seconds
63 degrees C (145 degrees F) for 30 minutes
Answer and working
A. 72 degrees C (161 degrees F) for 15 seconds
HTST is 72 degrees C for 15 s. 63 degrees C for 30 min is LTLT; 135 degrees C for seconds is UHT.
Question 4 · easy
A negative alkaline phosphatase test in bottled milk indicates what?
The milk was never heat treated
The milk was adequately pasteurised
The milk contains added neutraliser
The milk was sterilised above 100 degrees C
Answer and working
B. The milk was adequately pasteurised
ALP is destroyed by proper pasteurisation, so its absence shows adequate heating; a positive result means under-heating or raw milk contamination. ALP cannot distinguish pasteurisation from sterilisation.
Question 5 · medium
What are the conditions of the LTLT (holder) method of pasteurisation?
63 degrees C for 15 seconds
61.7 degrees C for 15 minutes
72 degrees C for 30 minutes
63 degrees C for 30 minutes
Answer and working
D. 63 degrees C for 30 minutes
LTLT is 63 degrees C (145 degrees F) for 30 minutes. 61.7 degrees C was the older temperature before Coxiella became the target; 72 degrees C belongs to HTST with 15 s.
Question 6 · easy
What is the typical temperature range for UHT treatment of milk?
About 72-75 degrees C for 15 seconds
About 85-95 degrees C for 5 minutes
About 110-120 degrees C for 15 minutes
About 135-150 degrees C for a few seconds
Answer and working
D. About 135-150 degrees C for a few seconds
UHT uses about 135-150 degrees C for seconds. 110-120 degrees C for minutes is in-container sterilisation; 72 degrees C is HTST; 85-95 degrees C is yoghurt mix heating.
Question 7 · easy
The Baudouin test is used in India to detect vanaspati in ghee. What does it actually detect?
Sesame oil, which has been required in vanaspati as a marker
Cottonseed oil, which reacts with sulphur in carbon disulphide
Phytosterols, which are present in all vegetable fats
Nickel catalyst left from the hydrogenation of oils
Answer and working
A. Sesame oil, which has been required in vanaspati as a marker
Furfural and hydrochloric acid give a pink-red colour with sesame oil. Cottonseed oil is detected by the Halphen test; phytosterols by the phytosterol acetate test.
Question 8 · easy
Which type of khoa is used to make gulab jamun?
Dhap khoa
Pindi khoa
Danedar khoa
Chhena khoa
Answer and working
A. Dhap khoa
Dhap khoa is the softest and moistest, suited to gulab jamun. Pindi goes to burfi and peda; danedar to kalakand. Chhena is a different, acid-coagulated product.
Question 9 · medium
How is danedar khoa given its granular texture?
The milk is first churned and the buttermilk is concentrated alone
A little acid such as citric acid or sour whey is added to the boiling milk
The milk is first coagulated with calf rennet at 30 degrees C before it is concentrated in the open pan
The khoa is pressed in hoops and then broken into grains by hand
Answer and working
B. A little acid such as citric acid or sour whey is added to the boiling milk
A small amount of acid during boiling produces fine curd granules; danedar khoa is used for kalakand.
Question 10 · medium
Which regulator sets the mandatory labelling requirements for packaged dairy products sold in India?
Directorate of Marketing and Inspection
Food Safety and Standards Authority of India
Indian Council of Agricultural Research
Bureau of Indian Standards only
Answer and working
B. Food Safety and Standards Authority of India
FSSAI's packaging and labelling regulations are mandatory. BIS standards for materials are mostly voluntary; DMI runs AGMARK.
A study plan for Milk & Milk Products Technology in TNPSC Animal Husbandry & Veterinary Science, Code 396
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (45% of the 29 questions): Codex and national standards for dairy products (4, 14%); Adulteration of milk (3, 10%); Dahi and other fermented products (3, 10%); Dairy quality control (3, 10%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Milk quality tests (3, 10%); Paneer and khoa (3, 10%); Pasteurisation (3, 10%); Dairy packaging (2, 7%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Ghee (2, 7%); Milk composition (2, 7%); UHT processing (1, 3%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Bank the easy marks: Ghee (2 easy of 2); UHT processing (1 easy of 1).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.