LAISHA
Open Laisha

Fertilised well, still a poor crop? Check soil pH

Short · · 54 s

Below about pH 5.5, aluminium dissolves and poisons root tips (stubby, brown roots). Most nutrients are most available at pH 6–7. Do not guess the lime dose from pH alone: ask for a buffer test; lime before sowing and mix it in; gypsum does not raise pH. The full video covers acid soils, aluminium toxicity, lime materials and a worked lime sum.

Saline, sodic and saline-sodic soils, and their reclamation →

Subscribe on YouTube

Why a well-fed crop can still struggle on acid soil

Soil pH is a measure of how acidic or alkaline the soil solution is, on a logarithmic scale: soil at pH 5 is ten times more acidic than soil at pH 6. Below roughly pH 5.5, aluminium held in clay minerals starts to dissolve as the toxic Al3+ ion. It damages the cells at the root tip, so roots become short, thick and stubby, often brown, with few fine branches. A crop with damaged roots cannot use the fertiliser it was given, which is why yields stay poor even after generous feeding.

Acidity also locks up phosphorus, because phosphate binds to iron and aluminium, and it lowers the supply of calcium, magnesium and molybdenum. Legumes suffer twice: their rhizobia nodulate poorly in acid soil, so they fix less nitrogen. Manganese can rise to toxic levels in some acid soils as well.

What the right pH looks like

For most field crops, the target range is about pH 6 to 7, where the major nutrients are most available. Some crops are adapted to lower pH, such as tea, pineapple and potato, which is often grown slightly acid to limit common scab; blueberries prefer pH 4.5 to 5.5. Check the needs of your crop before you correct anything.

Take a proper composite sample before deciding. A pH reading from one spot can mislead, because pH varies across a field and with depth. Ask the laboratory to measure pH in water or in calcium chloride and to report which, since the two methods differ by about half a unit.

How much lime, and when

The pH tells you that the soil is acid; it does not tell you how much lime is needed. That depends on the soil's buffer capacity, the acidity held on clay and organic matter. A clay or organic soil can need several times more lime than a sandy soil at the same pH. Laboratories estimate the dose with a buffer test (for example the SMP or Shoemaker-McLean-Pratt buffer, or similar local methods) and give a rate in tonnes per hectare for a stated depth.

Use agricultural limestone (calcium carbonate) or dolomitic limestone where magnesium is also low. Fineness matters: finely ground lime reacts within months, coarse lime over years. Spread it evenly and work it into the root zone a few weeks to months before sowing, because lime moves very slowly down the profile. Retest after one to two seasons.

Gypsum (calcium sulphate) is not a liming material. It supplies calcium and sulphur and can reduce subsoil aluminium toxicity, but it does not neutralise acidity. Overliming is also a mistake: above about pH 7.5, zinc, iron, manganese and boron become less available, and deficiencies follow.

What to do this season

If the crop is already sown and the soil is acid, the practical steps are to band phosphorus near the seed rather than broadcast it, to choose acid-tolerant varieties where they exist, and to plan liming before the next crop. Many acid soils have also lost organic matter; adding compost or residues improves buffering and root growth over time.

Sources: Brady NC, Weil RR, The Nature and Properties of Soils, 15th ed., ch. 9 · FAO Soils Portal: Acid soils · Sumner ME, Noble AD, Soil acidification: the world story, in Handbook of Soil Acidity (2003)

Transcript

You fertilised well, and the crop is still poor?

Check the soil pH.

On acid soils, below about pH five and a half, aluminium dissolves and poisons the roots.

Root tips stop growing, turning stubby and brown, so the plant cannot reach water or phosphorus.

The number to remember is six to seven. That is where most nutrients are most available.

But do not guess the lime dose from the pH alone.

A clay soil needs far more lime than a sand, so ask your laboratory for a buffer test. Apply lime before sowing and mix it in.

Gypsum does not raise pH,

and never lime past what your crop needs.

The full soil pH and liming guide is in our long video and at laisha.ai.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Go further with Laisha Smarter

US$10 a month · one price worldwide · cancel any time

  • Ask Laisha about what you watched — up to 1,000 questions a month
  • Your own crop calendar and pest alerts
  • Every calculator and tool
10 days free for every new account, no card.