10 t of maize at 25 % moisture is about 8.72 t at 14 %: drying removes about 12.8 % of the weight, not 11 %. Compare the buyer's price with your drying cost. The full video covers wet and dry basis moisture, drying sums, safe storage moisture, dryers, safe drying temperatures and storage structures.
Grain bought and sold commercially is priced at a standard moisture content, often 14 or 15 per cent for maize, because that is close to the level at which it stores safely. Grain at harvest can contain 20 to 30 per cent moisture. Water is heavy, so the farmer who sells wet grain by weight is partly selling water, and the buyer will either deduct for moisture (a 'shrink'), dry it at a charge, or pay a lower price. Doing the sum yourself tells you whether to dry first or sell wet.
Moisture content is usually expressed on a wet basis: the weight of water as a percentage of the total weight. The dry matter (the grain without water) stays the same while the grain dries. So:
Dry matter = wet weight × (1 − wet moisture). For 10 tonnes at 25 per cent: 10 × 0.75 = 7.5 tonnes.
Weight at the target moisture = dry matter ÷ (1 − target moisture). At 14 per cent: 7.5 ÷ 0.86 = 8.72 tonnes.
Water removed = 10 − 8.72 = 1.28 tonnes, or 12.8 per cent of the original weight. A common mistake is to subtract the moisture points (25 − 14 = 11 per cent); this underestimates the loss because the percentage is of a changing total.
Selling wet: the buyer's price per tonne of wet grain, or the price for dry grain minus the buyer's shrink and drying charges. Drying yourself: the price for 8.72 tonnes of dry grain, minus the cost of fuel or labour to dry it, handling losses and any extra storage. Also think about risk: maize held wet for even a few days in warm weather can heat, go mouldy and develop aflatoxin, so if you cannot dry it quickly, selling promptly may be the safer choice.
Many buyers also apply shrink factors that include a small handling loss on top of water. Ask for the buyer's moisture discount table and check it against your own calculation.
Use a calibrated grain moisture meter, testing several samples from the load. Hand tests (biting, rattling) are unreliable. Oven drying of a small sample at 130 °C for a set time, or 103 °C for longer, gives a reference value for calibration.
Write the weights, moisture readings and prices on the delivery note each time you sell, and compare across seasons. The figures show quickly whether investing in a drier, a drying floor or tarpaulins pays.
Selling your maize straight from the field? Do this sum first.
Ten tonnes harvested at twenty-five per cent moisture is not ten tonnes of fourteen per cent grain. The dry matter is seven and a half tonnes. Divide by zero point eight six,
and you have about eight point seven two tonnes of dry grain. So drying from twenty-five to fourteen per cent removes about twelve point eight per cent of the weight, not eleven. A buyer paying for dry grain pays you for eight point seven two tonnes.
Drying it yourself means removing about one thousand two hundred and eighty kilograms of water.
Compare both with your own prices. The full grain drying guide is in our long video and at laisha.ai.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
An AI operating system for agriculture: free guides, manuals and tools written for every country.