LAISHA
Open Laisha

JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering Engineering Mechanics (Statics & Dynamics): practice questions

JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering · India · IITs (JoSAA counselling)

Original practice questions written to the published syllabus · not past papers
10worked here, free
22written to this exam in this subject
10syllabus units

About JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering

JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering is a university entrance exam run by IITs (JoSAA counselling), for candidates in India. JEE Main, then JEE Advanced, then JoSAA counselling.

Official site: krishijagran.com.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Engineering Mechanics (Statics & Dynamics) in JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering

Forces, equilibrium and motion of particles and rigid bodies: the starting point for structures, machines and tractor mechanics.

Our 22 JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering questions in this subject: 14 easy, 6 medium, 2 hard, across 10 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering and are not shown on any other exam's page.

Question 1 · hard

A 1000 N sack hangs from a ring held by two ropes. One rope makes 60 degrees with the horizontal and the other 30 degrees with the horizontal, on opposite sides. Using Lami's theorem, what is the tension in the rope at 60 degrees to the horizontal?

  1. 500 N
  2. 1000 N
  3. 577 N
  4. 866 N
Answer and working

D. 866 N

The three forces meet at the ring. The angle between the two ropes is 90 degrees, between the 30-degree rope and the vertical weight 120 degrees, and between the 60-degree rope and the weight 150 degrees. Lami: T60 / sin 120 = W / sin 90, so T60 = 1000 x 0.866 = 866 N; similarly T30 = 500 N. The steeper rope carries more load; giving it 500 N swaps the ropes. 577 N assumes the two ropes share the load equally (2T sin 60 = 1000).

Question 2 · easy

In a planar free-body diagram, how many unknown reaction components does a smooth pin (hinge) support provide?

  1. One force normal to the supporting surface
  2. Two force components and one moment
  3. Three force components and no moment
  4. Two force components and no moment
Answer and working

D. Two force components and no moment

A pin prevents translation in both directions but allows rotation, so it provides two force components (or one force of unknown direction). A roller gives one normal force; a fixed support adds a moment.

Question 3 · easy

A block of grain-store wall material on a tilting board begins to slide when the board reaches 25 degrees. What is the coefficient of static friction?

  1. 0.423
  2. 0.906
  3. 2.145
  4. 0.466
Answer and working

D. 0.466

At impending slip on an incline, mu_s = tan(angle of repose) = tan 25 = 0.466. The sine and cosine come from using only one component of weight instead of their ratio. 0.423 is sin 25, 0.906 is cos 25 and 2.145 is the cotangent.

Question 4 · easy

The centroid of a body and its centre of gravity coincide when:

  1. The body is symmetrical about at least one axis, whatever its density
  2. The body is at rest on a horizontal surface with no external forces
  3. The body has uniform density and lies in a uniform gravity field
  4. The body is made of a single piece with no holes or cut-outs in it
Answer and working

C. The body has uniform density and lies in a uniform gravity field

The centroid is purely geometric; the centre of gravity weights each element by its weight. They coincide only when density (and g) is uniform. A symmetrical body made of two materials can have its CG away from the geometric centre.

Question 5 · easy

Ignoring air resistance, a particle launched from level ground at a fixed speed has the greatest horizontal range when the launch angle above the horizontal is:

  1. 30 degrees
  2. 45 degrees
  3. 60 degrees
  4. 90 degrees
Answer and working

B. 45 degrees

Range = u^2 sin 2 theta / g, maximum when sin 2 theta = 1, so theta = 45 degrees. 30 and 60 degrees give equal but smaller ranges; 90 degrees gives zero range.

Question 6 · medium

Spray droplets fall vertically at 3 m/s in still air while the sprayer moves forward at 4 m/s. What is the speed of the droplets relative to the sprayer?

  1. 5.0 m/s
  2. 7.0 m/s
  3. 1.0 m/s
  4. 2.65 m/s
Answer and working

A. 5.0 m/s

v(drop relative to sprayer) = v(drop) - v(sprayer). The two are perpendicular, so the magnitude is sqrt(3^2 + 4^2) = 5.0 m/s, angled backward. Adding or subtracting the speeds treats them as parallel. 2.65 m/s subtracts the squares (sqrt(16 - 9)).

Question 7 · easy

A hoist lifts a 400 kg pallet of feed with an upward acceleration of 1.5 m/s2. What is the tension in the hoist rope?

  1. 3924 N
  2. 3324 N
  3. 600 N
  4. 4524 N
Answer and working

D. 4524 N

T - m g = m a, so T = m (g + a) = 400 x (9.81 + 1.5) = 4524 N. m (g - a) applies when accelerating downward; 3924 N is the static tension; m a alone forgets gravity.

Question 8 · medium

A solid cylindrical roller rolls without slipping down a 30 degree slope from rest. What is the acceleration of its centre?

  1. 4.90 m/s2
  2. 2.45 m/s2
  3. 3.27 m/s2
  4. 5.66 m/s2
Answer and working

C. 3.27 m/s2

a = g sin theta / (1 + k^2/r^2); for a solid cylinder k^2 = r^2/2, so a = (2/3) g sin 30 = 3.27 m/s2. 4.91 is a frictionless sliding block; 2.45 is a thin ring.

Question 9 · medium

In which kind of collision between two bodies is total kinetic energy conserved as well as total momentum?

  1. A perfectly elastic collision, with coefficient of restitution equal to 1
  2. A perfectly plastic collision, with coefficient of restitution equal to 0
  3. Any collision where the two bodies have equal masses before impact
  4. Any collision in which no external force acts on the two bodies
Answer and working

A. A perfectly elastic collision, with coefficient of restitution equal to 1

Momentum is conserved whenever external impulse is negligible. Kinetic energy is conserved only if e = 1. With no external force momentum is conserved, but KE may still be lost to deformation and heat.

Question 10 · easy

A pulley block lifting an engine has four rope segments supporting the moving block. Ignoring friction and pulley weight, what pull on the free end holds a 2000 N load?

  1. 1000 N
  2. 2000 N
  3. 8000 N
  4. 500 N
Answer and working

D. 500 N

Virtual work: raising the load by delta y shortens four supporting segments, so the free end moves 4 delta y. P x 4 delta y = 2000 x delta y, P = 500 N. Counting only two segments gives 1000 N. 8000 N multiplies by four instead of dividing.

A study plan for Engineering Mechanics (Statics & Dynamics) in JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (50% of the 22 questions): Kinematics of particles and rigid bodies (4, 18%); Kinetics: Newton's laws and D'Alembert's principle (3, 14%); Area and mass moment of inertia (2, 9%); Centroid and centre of gravity (2, 9%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Force systems and resultants (2, 9%); Friction, including belt friction (2, 9%); Impulse and momentum (2, 9%); Virtual work (2, 9%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Work-energy principle (2, 9%); Free-body diagrams and equilibrium (1, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Force systems and resultants (1 hard of 2), Friction, including belt friction (1 hard of 2).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Centroid and centre of gravity (2 easy of 2); Virtual work (2 easy of 2).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering Engineering Mechanics

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.