Japan Professional Engineer (技術士) Second-stage Exam — Agriculture division · Japan · Institution of Professional Engineers, Japan (IPEJ)
Original practice questions written to the published syllabus · not past papersJapan Professional Engineer (技術士) Second-stage Exam — Agriculture division is a licensing and registration exam run by Institution of Professional Engineers, Japan (IPEJ), for candidates in Japan. Written (not multiple choice): compulsory paper 2 h (40 marks), elective papers 3.5 h (30 + 30 marks), then a 20-minute oral. 4–7 years' experience required.
Source: engineer.or.jp.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Enough agronomy to design for the crop: sowing geometry for planters, application rates for sprayers, moisture at harvest.
Our 30 Japan Professional Engineer Second-stage Exam questions in this subject: 8 easy, 17 medium, 5 hard, across 2 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to Japan Professional Engineer Second-stage Exam and are not shown on any other exam's page.
Weed-free plots yield 4.8 t/ha and a herbicide treatment yields 4.2 t/ha. What is the weed index of the treatment?
A. 12.5 %
Weed index = (4.8 − 4.2) ÷ 4.8 × 100 = 12.5 %. 14.3 % divides by the treatment yield instead of the weed-free yield; 87.5 % is the treatment yield as a share of weed-free yield; 0.6 is the yield gap in t/ha, not a percentage.
The critical period of crop–weed competition is best defined as:
A. The part of the crop's life during which weeds must be controlled to avoid unacceptable yield loss
The critical period is the window, often within the first third to half of crop life, when weed presence causes yield loss; weeds before it can be tolerated and those emerging after it do little damage. Weed effects are not equal throughout the season; post-harvest seed shed matters for the seed bank but is not this period; and herbicide timing aims at susceptible, not tolerant, stages.
To double the flow from a hydraulic nozzle while keeping the same nozzle, the operating pressure must be increased by a factor of about:
C. 4
Nozzle flow is proportional to the square root of pressure, so doubling flow needs 2² = 4 times the pressure. 2 assumes flow is proportional to pressure; 1.41 is the flow gain from doubling pressure; 8 cubes the ratio.
A fungicide is recommended at 0.75 kg a.i./ha. The product contains 500 g a.i. per litre and the sprayer applies 300 L/ha from a 400 L tank. How much product goes into each full tank?
C. 2.0 L
Product per ha = 0.75 ÷ 0.5 = 1.5 L. One tank covers 400 ÷ 300 = 1.333 ha, so product per tank = 1.5 × 1.333 = 2.0 L. 1.5 L is the per-hectare amount; 1.1 L scales by 300/400 instead of 400/300; 1.0 L treats the 0.75 kg a.i. dose as if it were litres of product (0.75 × 1.333).
How much of a 25 % EC insecticide is needed to prepare 1,000 L of a 0.1 % a.i. spray?
C. 4 L
Product volume = spray volume × desired % ÷ product % = 1,000 × 0.1 ÷ 25 = 4 L. 2.5 L multiplies 0.1 × 25; 25 L and 0.4 L are factor-of-ten slips.
The 'disease triangle' states that a plant disease develops only when three things coincide. They are:
C. A susceptible host, a virulent pathogen and a favourable environment
Disease needs host, pathogen and environment together; removing any one prevents it. Vectors matter only for some diseases; fungicides are control measures; nitrogen and sowing date can modify disease but are not the triangle.
A sprayer calibrated at 6 km/h delivers 150 L/ha. The operator drives at 8 km/h without changing nozzles or pressure. What is the actual application rate, and what happens to the dose of a.i. if the tank mix was made for 150 L/ha?
D. 112.5 L/ha, and the a.i. dose falls by 25 %
Rate ∝ 1/speed at constant flow: 150 × 6 ÷ 8 = 112.5 L/ha. The tank concentration is fixed, so a.i. per hectare also falls to 75 % of target. 200 L/ha inverts the speed ratio; a fixed-pressure sprayer without rate control does not compensate; and with a fixed concentration, a.i. dose falls in step with volume.
Which practice is a cultural method of pest management rather than a chemical or biological one?
B. Adjusting the sowing date so the susceptible crop stage avoids peak pest flight
Changing sowing date is a cultural method. Trichogramma releases and NPV sprays are biological controls; seed treatment with an insecticide is chemical control.
The pre-harvest interval on a pesticide label is:
B. The minimum time between the last application and harvest of the crop
The PHI ensures residues fall below the maximum residue limit by harvest. Equipment cleaning, pre-plant soil timing and shelf life are separate label items.
Atrazine, used pre-emergence in maize and sorghum, kills susceptible weeds by:
A. Inhibiting photosynthesis at photosystem II
Atrazine, a triazine, binds in photosystem II and blocks electron transport. EPSPS inhibition is glyphosate; synthetic auxin is 2,4-D and MCPA; ACCase inhibition is the grass herbicides such as clodinafop.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.