LAISHA
Open Laisha

Nepal Engineering Council Registration Exam Crop Production & Protection for Engineers: practice questions

Nepal Engineering Council Registration Exam — Agricultural Engineering · Nepal · Nepal Engineering Council

Original practice questions written to the published syllabus · not past papers
10worked here, free
86written to this exam in this subject
6syllabus units

About Nepal Engineering Council Registration Exam

Nepal Engineering Council Registration Exam — Agricultural Engineering is a licensing and registration exam run by Nepal Engineering Council, for candidates in Nepal.

Official site: nec.gov.np.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Crop Production & Protection for Engineers in Nepal Engineering Council Registration Exam

Enough agronomy to design for the crop: sowing geometry for planters, application rates for sprayers, moisture at harvest.

Our 86 Nepal Engineering Council Registration Exam questions in this subject: 25 easy, 42 medium, 19 hard, across 6 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Nepal Engineering Council Registration Exam and are not shown on any other exam's page.

Question 1 · easy

In the South Asian cropping calendar, which group of crops is typically sown in October–November and harvested in March–April?

  1. Rabi crops such as wheat, chickpea and mustard
  2. Ratoon crops raised from the stubble of the previous crop
  3. Kharif crops such as rice, maize and cotton
  4. Zaid crops such as watermelon and summer mung bean
Answer and working

A. Rabi crops such as wheat, chickpea and mustard

Rabi crops are the post-monsoon winter crops: sown in October–November, harvested in March–April. Rice, maize and cotton are kharif (monsoon) crops; watermelon and summer mung bean are zaid crops of the irrigated summer gap; 'ratoon' describes regrowth from stubble, not a season.

Question 2 · hard

A sandy loam has volumetric water contents of 0.24 at field capacity and 0.17 at the time of irrigation. The root zone is 0.8 m deep and surface application efficiency is 70 %. What gross depth should be applied to refill the root zone?

  1. 39 mm
  2. 274 mm
  3. 56 mm
  4. 80 mm
Answer and working

D. 80 mm

Net depth = (0.24 − 0.17) × 800 mm = 56 mm. Gross = 56 ÷ 0.70 = 80 mm. 56 mm is the net depth only; 39 mm multiplies by efficiency instead of dividing; 274 mm uses the whole field-capacity content as if the soil were bone dry.

Question 3 · medium

According to FAO, which set of three principles defines conservation agriculture?

  1. Contour bunding, terracing and planting trees on the field boundaries and terrace risers
  2. Deep ploughing, complete residue burial and rotation of cereals with pulses every year
  3. Minimum soil disturbance, permanent organic soil cover and crop species diversification
  4. Zero tillage, full residue removal for fodder and continuous cereal monoculture on the field
Answer and working

C. Minimum soil disturbance, permanent organic soil cover and crop species diversification

FAO's three linked principles are continuous minimum mechanical soil disturbance, permanent organic cover and diversification. Deep ploughing and residue burial are the opposite of minimum disturbance; removing all residue breaks the soil-cover principle and monoculture the diversification principle; bunds and terraces are soil conservation structures, not the definition of CA.

Question 4 · medium

A precision planter is set for 80,000 seeds/ha in 75 cm rows. What in-row seed spacing does this require?

  1. 16.7 cm
  2. 12.5 cm
  3. 9.4 cm
  4. 1.67 cm
Answer and working

A. 16.7 cm

Seeds per m² = 8.0. Seeds per metre of row = 8.0 × 0.75 = 6.0, so spacing = 1 ÷ 6.0 = 16.7 cm. 12.5 cm treats seeds per m² as seeds per metre of row; 9.4 cm divides by the row width instead of multiplying; 1.67 cm is a factor-of-ten slip in the metre-to-centimetre step.

Question 5 · medium

Plots of 20 m² are to receive urea at 260 kg/ha. How much urea is weighed for each plot?

  1. 5.2 kg
  2. 520 g
  3. 52 g
  4. 1.29 kg
Answer and working

B. 520 g

Per plot = 260 kg/ha × 20 m² ÷ 10,000 m²/ha = 0.52 kg = 520 g. 5.2 kg and 52 g are factor-of-ten slips; 1.29 kg treats the rate as kilograms per acre (260 × 20 ÷ 4,047).

Question 6 · easy

Harvest index is defined as:

  1. Biological yield divided by the area harvested from the plot
  2. Economic yield divided by total above-ground biological yield
  3. Grain yield divided by the potential yield of the variety
  4. Economic yield divided by the yield of straw alone, on a dry basis
Answer and working

B. Economic yield divided by total above-ground biological yield

HI = economic ÷ biological yield. Grain ÷ straw is the grain-to-straw ratio; biological yield ÷ area is simply biomass yield; actual ÷ potential yield is a yield gap measure.

Question 7 · hard

1,000 kg of shelled maize at 22 % moisture (wet basis) is dried to 14 % (wet basis). How much water is removed?

  1. 140.0 kg
  2. 80.0 kg
  3. 93.0 kg
  4. 102.6 kg
Answer and working

C. 93.0 kg

Dry matter = 1,000 × 0.78 = 780 kg. Final mass = 780 ÷ 0.86 = 907.0 kg. Water removed = 1,000 − 907.0 = 93.0 kg. 80 kg subtracts percentage points of the initial mass; 102.6 divides by the initial dry fraction instead of the final one; 140 kg is the final moisture taken as a mass.

Question 8 · medium

Why are mustard and other small oilseeds harvested with particular attention to timing?

  1. Their mature pods shatter readily, so delay sheds seed before or during cutting
  2. Their straw is too short for any machine, so harvest must wait for full lodging
  3. Their seed only reaches full oil content after the plant has been dead for several weeks
  4. Their seed must be harvested at above 30 % moisture to avoid splitting in the drum
Answer and working

A. Their mature pods shatter readily, so delay sheds seed before or during cutting

Rapeseed-mustard pods dehisce when dry, so harvest is timed to pod colour, or the crop is swathed or desiccated. Oil content does not rise after death; 30 % moisture is far too wet for oilseeds; and mustard is tall, not too short.

Question 9 · easy

Which description best defines an integrated farming system?

  1. A farm in which crops are grown in rotation but livestock and trees are deliberately excluded
  2. A farm that is managed by a cooperative so that all members share machinery under one contract
  3. A farm where one enterprise's outputs feed another, such as cattle dung fertilising crops
  4. A farm that grows a single high-value crop with all inputs purchased from outside the farm each season
Answer and working

C. A farm where one enterprise's outputs feed another, such as cattle dung fertilising crops

IFS links enterprises so that residues, manure and by-products are recycled. A single bought-in crop is specialised farming; cooperative ownership is an organisational form; a crop rotation without other enterprises is a cropping system, not an integrated farming system.

Question 10 · easy

In a rice–fish farming system, the fish mainly benefit the rice by:

  1. Feeding on weeds and insects and adding manure to the paddy
  2. Removing excess phosphorus that would otherwise lodge rice
  3. Fixing atmospheric nitrogen through bacteria in their gills
  4. Raising water temperature so the rice matures sooner
Answer and working

A. Feeding on weeds and insects and adding manure to the paddy

Fish graze weeds and pests, stir the soil and add excreta that recycles nutrients. Fish do not fix nitrogen; any temperature effect is minor; and phosphorus does not cause lodging (excess nitrogen does).

A study plan for Crop Production & Protection for Engineers in Nepal Engineering Council Registration Exam

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (42% of the 86 questions): Fertilisers and manures (18, 21%); Seed rate and sowing geometry (18, 21%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Crop classification and seasons (14, 16%); Cropping systems (14, 16%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Harvest index and harvest moisture (13, 15%); Farming-based livelihood systems (9, 10%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Seed rate and sowing geometry (5 hard of 18), Harvest index and harvest moisture (3 hard of 13), Fertilisers and manures (4 hard of 18).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Crop classification and seasons (5 easy of 14); Farming-based livelihood systems (3 easy of 9).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Nepal Engineering Council Registration Exam Crop Production & Protection for Engineers

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.