Nepal Engineering Council Registration Exam Protected Cultivation & Greenhouse Engineering: practice questions
Nepal Engineering Council Registration Exam — Agricultural Engineering · Nepal · Nepal Engineering Council
Original practice questions written to the published syllabus · not past papers
10worked here, free
39written to this exam in this subject
13syllabus units
About Nepal Engineering Council Registration Exam
Nepal Engineering Council Registration Exam — Agricultural Engineering is a licensing and registration exam run by Nepal Engineering Council, for candidates in Nepal.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Protected Cultivation & Greenhouse Engineering in Nepal Engineering Council Registration Exam
The farm-structures chapter names greenhouses: types, materials, orientation and basic environmental calculations.
Designing greenhouses and controlling the climate inside them, with the plastics and soilless systems that go with them.
Our 39 Nepal Engineering Council Registration Exam questions in this subject: 28 easy, 9 medium, 2 hard, across 13 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to Nepal Engineering Council Registration Exam and are not shown on any other exam's page.
Question 1 · easy
Which greenhouse type joins many spans along shared gutters so that a large floor area is covered with less outside wall per square metre of floor?
Ridge-and-furrow, gutter-connected multi-span house
Lean-to house built against an existing farm wall
Uneven-span house built across a hillside slope
Free-standing Quonset hoop house with one arch
Answer and working
A. Ridge-and-furrow, gutter-connected multi-span house
Gutter-connected (ridge-and-furrow) houses share walls and gutters between spans, so the exposed wall and heat loss per unit floor area fall. A lean-to uses one wall but stays small; a Quonset is a single free-standing span; an uneven-span house is a hillside adaptation of a single span.
Question 2 · medium
Why is the sawtooth greenhouse popular in warm climates?
Its saw-shaped roof focuses sunlight onto the rows, raising winter light in cold regions
Its offset roofs block all direct sun, so no shade net is ever needed in summer
Its spans are mounted on rails, so the house can be rolled to a new field each season
Each span has a vertical vent above the next span, giving ventilation without fans
Answer and working
D. Each span has a vertical vent above the next span, giving ventilation without fans
In a sawtooth house each roof is offset above the next, leaving a vertical opening in every span that works as a natural vent in wind and by stack effect. The roof does not focus light, does not block all direct sun, and the house is fixed, not on rails.
Question 3 · medium
Which description fits a Venlo-type glasshouse?
Multi-span glasshouse with narrow roof spans, light glazing bars and alternating hinged roof vents
Single-span hoop house with roll-up side curtains and no roof vents, covered with film
Net house of knitted shade cloth on timber poles, with no film and no ventilation openings
Lean-to glasshouse built against a thick north wall of earth, covered every night by a rolled insulating blanket
Answer and working
A. Multi-span glasshouse with narrow roof spans, light glazing bars and alternating hinged roof vents
The Venlo type, typical of north-west Europe, is a gutter-connected glasshouse of narrow spans with light bars and alternating roof vents. The hoop house, the net house and the blanket-covered lean-to (the Chinese solar greenhouse) are different structures.
Question 4 · easy
On a clear night, why does a glasshouse lose less heat by radiation than a house covered with a single layer of plain polyethylene?
Glass reflects all incoming visible light back to the crop at night, while polyethylene absorbs it and re-emits it outward
Glass conducts heat far worse than polyethylene, so the U-value of single glass is near zero
Glass is nearly opaque to long-wave thermal radiation, while plain polyethylene transmits much of it
Glass blocks ultraviolet light from the stars, which is the main cause of night cooling
Answer and working
C. Glass is nearly opaque to long-wave thermal radiation, while plain polyethylene transmits much of it
Night radiative loss is long-wave (thermal) radiation from crop and soil to the cold sky; glass blocks it, plain polyethylene passes much of it unless it carries an IR additive. Single glass and single film have similar, high U-values; there is no visible light or meaningful starlight UV at night to matter.
Question 5 · easy
In a fan-pad greenhouse, where is the air warmest during a hot afternoon?
At the pad end, because the wet pad releases heat as water evaporates
In the middle, because the fans and pads both push heat toward the centre
At the fan end, as the air gains heat crossing the house
Nowhere; fan-pad systems keep the temperature exactly equal everywhere
Answer and working
C. At the fan end, as the air gains heat crossing the house
Air leaves the pad at its coolest and gains solar heat on its way to the fans, so a gradient builds along the house. This gradient limits the pad-to-fan distance. Evaporation at the pad absorbs heat rather than releasing it.
Question 6 · easy
An unvented gas heater in a closed greenhouse causes flower drop and leaf curling, and workers complain of headaches. Which combustion products explain both effects?
Ethylene harming the crop and carbon monoxide harming the workers
Oxygen harming the crop and nitrogen harming the workers inside
Water vapour harming the crop and argon harming the workers inside
Carbon dioxide harming the crop and ozone harming the workers inside
Answer and working
A. Ethylene harming the crop and carbon monoxide harming the workers
Incomplete combustion releases ethylene, which causes flower and bud drop and epinasty at very low levels, and carbon monoxide, which is toxic to people. Heaters must be vented and supplied with combustion air. Oxygen, nitrogen, argon and moderate CO2 are not the culprits.
Question 7 · hard
Which features define the passive solar greenhouse developed for cold, sunny winters in northern China?
A glass roof facing north, a fan-pad wall facing south, and gas heaters run through every night of the winter season
A round hoop house with no walls, covered in shade net during winter to keep the frost out
A thick north wall that stores daytime heat, a sloping south film roof and a blanket rolled over the film at night
An underground house lit only by lamps, with no film or glass exposed to the winter sun
Answer and working
C. A thick north wall that stores daytime heat, a sloping south film roof and a blanket rolled over the film at night
The design captures winter sun through the south-facing film, stores heat in a massive north wall, and limits night loss with an insulating blanket, often without any fuel. The other descriptions are not this structure.
Question 8 · easy
Root-zone (floor or bench) heating is especially suited to
propagation and pot plants, where warming the medium speeds rooting
melting snow on the roof, where heat must reach the outer cover
cooling the house in summer, where cold water runs in the pipes
drying harvested fruit, where hot air must be blown over the crop
Answer and working
A. propagation and pot plants, where warming the medium speeds rooting
Warming the growing medium promotes root growth and allows a lower air temperature, which suits cuttings, seedlings and pot plants. Snow melting, summer cooling and fruit drying are different jobs.
Question 9 · medium
How does the air temperature in a shade-net house compare with that in a film-covered polyhouse on a hot, sunny day?
The net house stays close to outside air temperature, while the polyhouse runs well above it
The net house runs well above outside air temperature, while the polyhouse stays below it
Both stay below outside air temperature, because the covers block all of the sunlight
Both run at the same air temperature, because shade nets and plastic films transmit exactly the same heat
Answer and working
A. The net house stays close to outside air temperature, while the polyhouse runs well above it
A net house has open mesh walls and roof and so exchanges air freely, staying near ambient while reducing radiation; a film house traps heat and needs ventilation. Neither cover lowers air temperature below ambient without evaporative cooling.
Question 10 · easy
Floating row covers of light spunbonded non-woven polypropylene are laid directly on a crop mainly to
block all light so that weeds die, in the same way as black polyethylene mulch
hold a carbon dioxide-rich atmosphere around the crop so that it is enriched during the day without burners
give a few degrees of frost protection and exclude insects while passing light, air and water
carry the full weight of snow, replacing a greenhouse in regions with heavy winters
Answer and working
C. give a few degrees of frost protection and exclude insects while passing light, air and water
Row covers trap some heat, shelter from wind and keep out insects while staying permeable. They transmit most light, are far too porous to hold enrichment, and are not structural.
A study plan for Protected Cultivation & Greenhouse Engineering in Nepal Engineering Council Registration Exam
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (56% of the 39 questions): Greenhouse types and orientation (6, 15%); Shading (5, 13%); Greenhouse heating (4, 10%); Plastics in agriculture: mulch and lining (4, 10%); Glazing and cladding materials (3, 8%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Hydroponics and aeroponics (3, 8%); Micro-irrigation and fertigation in greenhouses (3, 8%); Automation of climate control (2, 5%); Fan-pad and fogging cooling (2, 5%); Forced ventilation (2, 5%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Greenhouse heat balance (2, 5%); Natural ventilation (2, 5%); CO2 enrichment (1, 3%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Micro-irrigation and fertigation in greenhouses (1 hard of 3), Greenhouse heating (1 hard of 4).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Glazing and cladding materials (3 easy of 3); Hydroponics and aeroponics (3 easy of 3).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.