LAISHA
Open Laisha

ASRB NET Statistical Methods for Agricultural Sciences: practice questions

ASRB NET - Agricultural Statistics (and Computer Application / Bioinformatics) · India · Agricultural Scientists Recruitment Board (ICAR)

Original practice questions written to the published syllabus · not past papers
10worked here, free
26written to this exam in this subject
12syllabus units

About ASRB NET

ASRB NET - Agricultural Statistics (and Computer Application / Bioinformatics) is a professional certification run by Agricultural Scientists Recruitment Board (ICAR), for candidates in India. NET: one objective paper of about 150 questions, 2 hours, negative marking, online, Master's level (pattern as reported for other disciplines).

Official site: asrb.org.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Statistical Methods for Agricultural Sciences in ASRB NET

The first statistics course of every agricultural degree, which is also the statistics unit of AIEEA-PG Group 07: frequency distributions, averages and dispersion, probability and the three named distributions, tests of significance, correlation and regression, and the CRD and RBD. Laisha teaches it to the depth the entrance examines; the Veterinary, Agribusiness and Agricultural Engineering tracks have their own introductory versions.

Our 26 ASRB NET questions in this subject: 0 easy, 8 medium, 18 hard, across 12 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ASRB NET and are not shown on any other exam's page.

Question 1 · hard

Two batches of 50 lambs each have mean weights 60 and 70 kg with SDs 8 and 6 kg (divisor n). What is the SD of all 100 lambs combined?

  1. 7.07 kg
  2. 8.66 kg
  3. 7.00 kg
  4. 5.00 kg
Answer and working

B. 8.66 kg

Combined mean = 65. Combined variance = [50(64 + 25) + 50(36 + 25)]/100 = (4450 + 3050)/100 = 75, so SD = 8.66 kg. 7.07 kg pools only the within-batch variances (√50) and forgets the spread between the two batch means.

Question 2 · hard

An RBD wheat trial reports error mean square 0.09 (t/ha)² and grand mean 3.0 t/ha. What is the coefficient of variation of the experiment?

  1. 3%
  2. 10%
  3. 30%
  4. 0.1%
Answer and working

B. 10%

CV = 100 × √EMS/grand mean = 100 × 0.3/3.0 = 10%. 3% forgets the square root (100 × 0.09/3.0), and 30% divides √EMS by 1 instead of the mean.

Question 3 · hard

The first four raw moments about 5 are 1, 4, 10 and 45. What are the third and fourth central moments?

  1. μ₃ = 10, μ₄ = 45
  2. μ₃ = −2, μ₄ = 27
  3. μ₃ = 0, μ₄ = 28
  4. μ₃ = 0, μ₄ = 26
Answer and working

D. μ₃ = 0, μ₄ = 26

μ₃ = μ′₃ − 3μ′₂μ′₁ + 2μ′₁³ = 10 − 12 + 2 = 0; μ₄ = μ′₄ − 4μ′₃μ′₁ + 6μ′₂μ′₁² − 3μ′₁⁴ = 45 − 40 + 24 − 3 = 26. Quoting the raw moments ignores the shift of origin to the mean.

Question 4 · hard

A distribution has μ₂ = 3, μ₃ = 0 and μ₄ = 36. How is it described?

  1. Symmetrical and platykurtic
  2. Symmetrical and leptokurtic
  3. Positively skewed and mesokurtic
  4. Negatively skewed and leptokurtic
Answer and working

B. Symmetrical and leptokurtic

β₁ = μ₃²/μ₂³ = 0, so the distribution is symmetrical; β₂ = μ₄/μ₂² = 36/9 = 4, which exceeds 3, so it is leptokurtic (heavier tails than the normal). Platykurtic would need β₂ below 3.

Question 5 · hard

A disease affects 1% of a herd. A test has sensitivity 95% and specificity 90%. An animal tests positive. What is the probability it has the disease?

  1. 0.088
  2. 0.950
  3. 0.900
  4. 0.010
Answer and working

A. 0.088

P(positive) = 0.01 × 0.95 + 0.99 × 0.10 = 0.1085; P(disease | positive) = 0.0095/0.1085 = 0.088. 0.950 is the sensitivity, P(positive | disease), the reverse conditional.

Question 6 · medium

In a wheat RBD with 4 replications, the error mean square is 0.08 (t/ha)². What is the standard error of the difference between two treatment means?

  1. 0.141 t/ha
  2. 0.200 t/ha
  3. 0.040 t/ha
  4. 0.283 t/ha
Answer and working

B. 0.200 t/ha

SEd = √(2EMS/r) = √(0.16/4) = 0.200 t/ha. 0.141 is the SE of a single treatment mean, √(EMS/r).

Question 7 · hard

A two-treatment trial with 3 replications finds no significant difference at 5%. What is the soundest conclusion?

  1. The trial failed to detect a difference; with 3 replications its power is likely low
  2. The two treatments are now proved to have identical effects on the crop
  3. The treatments differ, but the size of the difference is exactly 5%
  4. The null hypothesis of no difference is true with probability 0.95
Answer and working

A. The trial failed to detect a difference; with 3 replications its power is likely low

Failing to reject H₀ is not evidence that H₀ is true; small trials have low power. The correct report gives the estimated difference with its confidence interval and notes the power.

Question 8 · hard

Two varieties are grown side by side on 8 farms. The yield differences (A − B, t/ha) are 0.4, 0.6, 0.2, 0.8, 0.5, 0.3, 0.7 and 0.5. What is the paired t statistic?

  1. 2.50
  2. 7.07
  3. 5.00
  4. 2.36
Answer and working

B. 7.07

d̄ = 0.50; s_d = 0.2000 (divisor n − 1); t = d̄/(s_d/√8) = 7.07 with 7 df, far above 2.365, so A outyields B. 2.50 forgets to divide s_d by √n.

Question 9 · hard

Ten farms each grow an old and a new variety on adjacent plots. An analyst runs a two-sample t-test on the 10 + 10 yields. What is wrong?

  1. Pairing is ignored, so farm-to-farm variation inflates the standard error and the test loses power
  2. Nothing: the two-sample test is always more powerful than the paired test for farm data
  3. The paired test would need 20 degrees of freedom, which the analyst has failed to use
  4. A two-sample t-test needs at least 30 farms in each group before it becomes valid
Answer and working

A. Pairing is ignored, so farm-to-farm variation inflates the standard error and the test loses power

The yields on the same farm are correlated. A paired test on the 10 differences removes the variation between farms; the independent-samples test leaves it in the error.

Question 10 · hard

What are the assumptions of the analysis of variance for an RBD?

  1. Equal treatment means, equal block means and normally distributed treatment totals
  2. Errors correlated within blocks, with the error variance increasing across blocks
  3. Additive treatment and block effects, independent errors, normality and homogeneous error variance
  4. Normality of the observed yields, with no assumption on errors or additivity
Answer and working

C. Additive treatment and block effects, independent errors, normality and homogeneous error variance

The RBD model yᵢⱼ = μ + tᵢ + bⱼ + eᵢⱼ assumes additivity (no treatment × block interaction), and errors that are independent, normal and of constant variance. Equal treatment means is the null hypothesis being tested, not an assumption.

A study plan for Statistical Methods for Agricultural Sciences in ASRB NET

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (54% of the 26 questions): Basic principles of experimental design, ANOVA, CRD and RBD (5, 19%); Correlation and regression and their tests of significance (3, 12%); Skewness, kurtosis and moments (3, 12%); Student's t-test: one sample, two samples and paired (3, 12%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Chi-square tests for goodness of fit and independence of attributes (2, 8%); F-test for equality of variances (2, 8%); Measures of dispersion: range, mean deviation, quartile deviation, variance and coefficient of variation (2, 8%); Tests of significance: errors, null hypothesis and level of significance (2, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Binomial, Poisson and normal distributions in agricultural data (1, 4%); Measures of central tendency: arithmetic, geometric and harmonic means, median and mode (1, 4%); Probability: addition and multiplication laws, conditional probability and Bayes' theorem (1, 4%); Random sampling and standard error (1, 4%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Skewness, kurtosis and moments (3 hard of 3), Student's t-test: one sample, two samples and paired (3 hard of 3), Measures of dispersion: range, mean deviation, quartile deviation, variance and coefficient of variation (2 hard of 2).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ASRB NET Statistical Methods for Agricultural Sciences

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.