LAISHA
Open Laisha

ICAR AIEEA-PG Statistical Methods for Agricultural Sciences: practice questions

ICAR AIEEA-PG - Group 07 Statistical Sciences (Master's admission and PG scholarship) · India · National Testing Agency for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
103written to this exam in this subject
14syllabus units

About ICAR AIEEA-PG

ICAR AIEEA-PG - Group 07 Statistical Sciences (Master's admission and PG scholarship) is a postgraduate admission exam run by National Testing Agency for ICAR, for candidates in India. Computer-based test, 120 minutes, single paper of 120 MCQs, +4 / -1, English. 2026 exam on 4 July 2026. Fills ICAR's all-India quota of Master's seats at agricultural universities.

Source: cdnbbsr.s3waas.gov.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Statistical Methods for Agricultural Sciences in ICAR AIEEA-PG

The first statistics course of every agricultural degree, which is also the statistics unit of AIEEA-PG Group 07: frequency distributions, averages and dispersion, probability and the three named distributions, tests of significance, correlation and regression, and the CRD and RBD. Laisha teaches it to the depth the entrance examines; the Veterinary, Agribusiness and Agricultural Engineering tracks have their own introductory versions.

Our 103 ICAR AIEEA-PG questions in this subject: 35 easy, 44 medium, 24 hard, across 14 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AIEEA-PG and are not shown on any other exam's page.

Question 1 · easy

A frequency table uses inclusive classes 10-19, 20-29, 30-39 for days to flowering recorded as whole days. What are the true class boundaries of the class 20-29?

  1. 20 to 29
  2. 20 to 30
  3. 19 to 29
  4. 19.5 to 29.5
Answer and working

D. 19.5 to 29.5

With inclusive classes the gap between 19 and 20 is one unit, so half a unit is subtracted from each lower limit and added to each upper limit: 19.5 to 29.5. Using 20 to 30 treats the classes as exclusive, which they are not.

Question 2 · medium

In a moderately skewed distribution of farm incomes, the mean is 52 and the median is 48 currency units (thousands). Using Karl Pearson's empirical relation, what is the approximate mode?

  1. 40
  2. 44
  3. 56
  4. 50
Answer and working

A. 40

Mode ≈ 3 Median − 2 Mean = 144 − 104 = 40. The order mode < median < mean confirms positive skew, typical of incomes; 56 would put the mode above the mean, which happens only with negative skew.

Question 3 · easy

Where are the points of inflexion of a normal curve with mean μ and SD σ?

  1. At μ − σ and μ + σ
  2. At μ − 2σ and μ + 2σ
  3. At μ only
  4. At μ − 1.96σ and μ + 1.96σ
Answer and working

A. At μ − σ and μ + σ

The second derivative of the normal density is zero at x = μ ± σ, where the curve changes from concave to convex. ±1.96σ marks the central 95% area, a different property.

Question 4 · medium

For a fixed sample size, the level of significance of a test is lowered from 5% to 1%. What happens to the probability of a Type II error?

  1. It decreases
  2. It increases
  3. It stays the same
  4. It becomes equal to α
Answer and working

B. It increases

With n fixed, a smaller rejection region makes it harder to reject H₀ when it is false, so β rises and power falls. Only a larger sample can lower both errors together.

Question 5 · medium

Two breeds of sheep give mean fleece weights 52 and 50 (hundreds of grams) from samples of 100 each, with SDs 6 and 8. What is Z for the difference of means?

  1. 0.14
  2. 2.00
  3. 1.43
  4. 0.20
Answer and working

B. 2.00

SE = √(36/100 + 64/100) = √1.00 = 1.00, so Z = 2/1 = 2.00, just above 1.96 and significant at 5% (two-tailed). 1.43 wrongly adds the two SEs (0.6 + 0.8 = 1.4) instead of their squares; 0.20 divides by √(6² + 8²) = 10 without allowing for n.

Question 6 · medium

For a two-tailed large-sample test at the 1% level, what is the critical value of |Z|?

  1. 1.960
  2. 2.576
  3. 2.326
  4. 1.645
Answer and working

B. 2.576

Two-tailed 1%: 0.5% in each tail, |Z| = 2.576. 2.326 is one-tailed 1%; 1.96 is two-tailed 5%; 1.645 is one-tailed 5%.

Question 7 · medium

The variance ratio for two plant-height samples is F = 2.25 with (10, 8) df. The upper 5% point of F(10, 8) is 3.35. What should be concluded?

  1. The variances differ significantly at 5%, so Welch's unpooled t-test is needed
  2. The test is invalid because the two sample sizes, 11 and 9 plants, are unequal
  3. The variances differ significantly at the 1% level but not at the 5% level
  4. The variances do not differ significantly, so pooling them for a t-test is acceptable
Answer and working

D. The variances do not differ significantly, so pooling them for a t-test is acceptable

2.25 < 3.35, so H₀ of equal variances is not rejected. Unequal sample sizes do not invalidate the F-test; they only set its degrees of freedom.

Question 8 · medium

A 2 × 2 table on vaccine use and disease has one expected frequency of 3. Which adjustment is standard?

  1. Double all observed frequencies so the expected values pass 5
  2. Apply Yates' continuity correction, or use Fisher's exact test
  3. Convert the frequencies to percentages before computing χ²
  4. Increase the degrees of freedom of the test from 1 to 2
Answer and working

B. Apply Yates' continuity correction, or use Fisher's exact test

Small expected frequencies make the χ² approximation poor. For 2 × 2 tables, Yates' correction (subtract 0.5 from each |O − E|) or Fisher's exact test is used; χ² must never be computed on percentages or inflated counts.

Question 9 · easy

Which basic principle of experimental design makes a valid estimate of experimental error possible?

  1. Local control
  2. Confounding
  3. Replication
  4. Uniformity trials
Answer and working

C. Replication

Error is the variation among units treated alike, which can be estimated only if treatments are replicated. Randomisation makes that estimate unbiased; local control reduces it.

Question 10 · medium

Which design is most suitable for a pot experiment with 8 fertiliser treatments in a uniform greenhouse?

  1. Randomised block design with 8 blocks
  2. Completely randomised design
  3. Latin square design of order 8
  4. Split-plot design with fertiliser as the main plot
Answer and working

B. Completely randomised design

With homogeneous material there is no gradient to block on, so the CRD gives maximum error df and simplicity. Blocking would cost error df without reducing error.

A study plan for Statistical Methods for Agricultural Sciences in ICAR AIEEA-PG

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (45% of the 103 questions): Basic principles of experimental design, ANOVA, CRD and RBD (12, 12%); Binomial, Poisson and normal distributions in agricultural data (9, 9%); Correlation and regression and their tests of significance (9, 9%); Measures of central tendency: arithmetic, geometric and harmonic means, median and mode (9, 9%); Chi-square tests for goodness of fit and independence of attributes (7, 7%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Measures of dispersion: range, mean deviation, quartile deviation, variance and coefficient of variation (7, 7%); Skewness, kurtosis and moments (7, 7%); Student's t-test: one sample, two samples and paired (7, 7%); Tests of significance: errors, null hypothesis and level of significance (7, 7%); F-test for equality of variances (6, 6%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Probability: addition and multiplication laws, conditional probability and Bayes' theorem (6, 6%); Random sampling and standard error (6, 6%); Statistics: definition, uses and limitations; frequency distributions and curves (6, 6%); Large-sample (SND) tests for one and two means (5, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Student's t-test: one sample, two samples and paired (4 hard of 7), Skewness, kurtosis and moments (3 hard of 7), Binomial, Poisson and normal distributions in agricultural data (3 hard of 9).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Random sampling and standard error (3 easy of 6); Statistics: definition, uses and limitations; frequency distributions and curves (3 easy of 6).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AIEEA-PG Statistical Methods for Agricultural Sciences

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.