ICAR AIEEA-PG - Group 07 Statistical Sciences (Master's admission and PG scholarship) · India · National Testing Agency for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
59written to this exam in this subject
11syllabus units
About ICAR AIEEA-PG
ICAR AIEEA-PG - Group 07 Statistical Sciences (Master's admission and PG scholarship) is a postgraduate admission exam run by National Testing Agency for ICAR, for candidates in India. Computer-based test, 120 minutes, single paper of 120 MCQs, +4 / -1, English. 2026 exam on 4 July 2026. Fills ICAR's all-India quota of Master's seats at agricultural universities.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Differential Equations, Finite Differences & Numerical Analysis in ICAR AIEEA-PG
Ordinary differential equations, interpolation, numerical differentiation and integration and root-finding: what AIEEA-PG Group 07 names explicitly, and what growth models, life tables and iterative estimation (Newton-Raphson for maximum likelihood) rely on.
Our 59 ICAR AIEEA-PG questions in this subject: 17 easy, 39 medium, 3 hard, across 11 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AIEEA-PG and are not shown on any other exam's page.
Question 1 · medium
The equation (2xy + 3)dx + (x² + 4y)dy = 0 is exact because:
M and N are both polynomials
∂M/∂y = ∂N/∂x = 2x
∂M/∂x = ∂N/∂y
M = N at the origin
Answer and working
B. ∂M/∂y = ∂N/∂x = 2x
M = 2xy + 3 gives ∂M/∂y = 2x; N = x² + 4y gives ∂N/∂x = 2x.
Question 2 · hard
With K = 1,000, N₀ = 100 and r = 0.5, the logistic solution N(t) = K/(1 + Ae^(−rt)) gives N(2) of about:
The monomolecular (Mitscherlich) model dN/dt = r(K − N), used for fertiliser response, has:
An inflection at K/2
An inflection at K/e
No inflection point
Exponential growth without limit
Answer and working
C. No inflection point
Growth rate is greatest at the start and declines steadily; logistic and Gompertz are sigmoid.
Question 4 · easy
Values are 1, 3 and 7 at x = 0, 1, 2. Newton's forward formula gives the value at x = 1.5 as:
5.00
4.50
5.25
4.75
Answer and working
D. 4.75
Δy₀ = 2, Δ²y₀ = 2; y = 1 + 2p + p(p − 1) with p = 1.5: 1 + 3 + 0.75 = 4.75.
Question 5 · easy
Bisection starts on an interval of length 1. How many steps guarantee an error below 0.001?
9
10
100
1,000
Answer and working
B. 10
(1/2)ⁿ < 0.001 requires 2ⁿ > 1,000, so n = 10 (2⁹ = 512 is not enough).
Question 6 · medium
Near a simple root, Newton–Raphson converges:
Linearly
Quadratically
Not at all
Only for linear equations
Answer and working
B. Quadratically
Errors are roughly squared each step; at multiple roots convergence becomes linear.
Question 7 · easy
Partial pivoting in Gaussian elimination chooses as pivot:
The smallest non-zero entry in the whole matrix
The diagonal entry always
The largest entry in absolute value in the column
The entry in the last row
Answer and working
C. The largest entry in absolute value in the column
Large pivots limit growth of rounding errors.
Question 8 · medium
For 10x + y = 11 and x + 10y = 11, one Jacobi iteration from (0, 0) gives:
(1.0, 1.0)
(1.1, 1.1)
(1.1, 0.99)
(11, 11)
Answer and working
B. (1.1, 1.1)
x = 11/10 and y = 11/10 using old values; Gauss–Seidel would give y = (11 − 1.1)/10 = 0.99.
Question 9 · easy
For y′ = y, y(0) = 1, one Euler step with h = 0.1 gives:
1.1
1.105
1.01
1.2
Answer and working
A. 1.1
y₁ = y₀ + hf = 1 + 0.1 × 1.
Question 10 · medium
The eccentricity of the ellipse x²/25 + y²/9 = 1 is:
0.8
0.6
1.25
0.36
Answer and working
A. 0.8
e = √(1 − 9/25) = 4/5.
A study plan for Differential Equations, Finite Differences & Numerical Analysis in ICAR AIEEA-PG
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (44% of the 59 questions): Calculus of finite differences and difference operators (7, 12%); Ordinary differential equations of first order: exact, linear and Bernoulli equations (7, 12%); Higher-order linear equations: complementary function and particular integral (6, 10%); Interpolation: Newton forward and backward, Lagrange and divided differences (6, 10%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Numerical differentiation (6, 10%); Coordinate geometry of conics (5, 8%); Numerical integration: trapezoidal and Simpson's rules (5, 8%); Solution of linear systems: Gaussian elimination and iterative methods (5, 8%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Difference equations (4, 7%); Numerical solution of ODEs: Euler and Runge-Kutta methods (4, 7%); Solution of non-linear equations: bisection and Newton-Raphson (4, 7%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Higher-order linear equations: complementary function and particular integral (1 hard of 6), Calculus of finite differences and difference operators (1 hard of 7), Ordinary differential equations of first order: exact, linear and Bernoulli equations (1 hard of 7).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Difference equations (2 easy of 4); Solution of non-linear equations: bisection and Newton-Raphson (2 easy of 4).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.