CSIR-UGC NET - Mathematical Sciences (statistics option) · India · National Testing Agency for CSIR
Original practice questions written to the published syllabus · not past papersCSIR-UGC NET - Mathematical Sciences (statistics option) is a PhD, fellowship and lectureship exam run by National Testing Agency for CSIR, for candidates in India. Computer-based, 3 hours, Parts A (general aptitude), B and C (subject); statisticians answer from the statistics unit.
Official site: csirnet.nta.ac.in.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
The logic and optimality of tests: errors and power, the Neyman-Pearson lemma, uniformly most powerful and unbiased tests, likelihood-ratio tests and their large-sample forms, and Wald's sequential probability ratio test.
Our 27 CSIR-UGC NET questions in this subject: 2 easy, 10 medium, 15 hard, across 9 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to CSIR-UGC NET and are not shown on any other exam's page.
For H₀: p = 0.5 against H₁: p = 0.8 with 10 Bernoulli trials, the MP test rejects for large X. P(X ≥ 9 | H₀) = 11/1024 and P(X = 8 | H₀) = 45/1024. For an exact size of 0.05, with what probability should H₀ be rejected when X = 8?
B. 0.893
Size = P(X ≥ 9) + γP(X = 8) = 0.05 gives γ = (0.05 − 11/1024)/(45/1024) = 0.893. Dividing 0.05 by P(X = 8) alone ignores the rejections already made at X ≥ 9.
A family {f(x; θ)} has a monotone likelihood ratio in T(x) when:
A. f(x; θ₂)/f(x; θ₁) is non-decreasing in T(x) for every θ₂ > θ₁
MLR concerns the likelihood ratio between two parameter values as a function of the statistic. Sufficiency and completeness are separate properties (though exponential families have both).
X₁, ..., Xₙ are iid N(μ, σ²) with σ² unknown. For H₀: μ ≤ μ₀ against μ > μ₀, which statement is correct?
C. No UMP test exists; the one-sided t-test is UMP among unbiased tests
The nuisance parameter σ² prevents a UMP test, but the one-sided t-test is UMPU (and UMP among invariant tests). Replacing σ by s without the t distribution does not give exact level α.
In what sense is Fisher's exact test for a 2 × 2 table optimal?
B. Its randomised version is UMPU for the odds ratio, by conditioning on the margins
The margins are sufficient for the nuisance parameters; conditioning on them gives a hypergeometric null distribution, and the randomised conditional test is UMPU. The non-randomised version is conservative.
For H₀: σ² = σ₀² against σ² ≠ σ₀² in a normal sample with μ unknown, how do the UMPU cut-offs for (n − 1)s²/σ₀² compare with the usual equal-tail points?
B. They differ, because the chi-square distribution is skewed
The UMPU conditions (size α and zero slope of power at σ₀²) do not give equal tails for a skewed null distribution; for small n the difference is noticeable. Equal tails are used in practice for convenience.
Pearson's chi-square statistic Σ(O − E)²/E for a multinomial goodness-of-fit test belongs to which family of tests?
A. Score tests
Pearson's X² is the score statistic for the multinomial, using expected (null) frequencies in the denominator. Neyman's modified statistic with observed frequencies is a Wald-type statistic; G² is the LRT.
Ten Poisson counts total 30. What are the score and Wald χ² statistics for H₀: λ = 2?
C. Score 5.000, Wald 3.333
Score: U(2) = 30/2 − 10 = 5, I(2) = n/λ₀ = 5, S = 25/5 = 5.000. Wald: (λ̂ − λ₀)² × n/λ̂ = 1 × 10/3 = 3.333. The LRT (4.328) lies between them; all three refer to χ²₁.
Which confidence interval for a binomial proportion is obtained by inverting the score test?
B. The Wilson interval
Solving |p̂ − p₀| ≤ z√(p₀(1 − p₀)/n) for p₀ gives the Wilson interval. The Wald interval inverts the Wald test; Clopper-Pearson inverts the exact binomial tests.
Ten ordered p-values are 0.001, 0.004, 0.012, 0.020, 0.035, 0.060, 0.11, 0.25, 0.48 and 0.71. How many hypotheses does the Benjamini-Hochberg procedure reject at FDR q = 0.05?
A. 4
Find the largest k with p₍ₖ₎ ≤ kq/m = 0.005k: 0.020 ≤ 0.020 at k = 4, while 0.035 > 0.025 at k = 5 and later values fail too. So k = 4. Bonferroni (0.005) rejects 2.
What did Wald and Wolfowitz prove about the SPRT?
A. Among tests with error rates at most α and β, it minimises the expected sample size under both H₀ and H₁
The optimality concerns E(N) at θ₀ and θ₁. Wald's approximations give actual error rates close to, but not exactly equal to, α and β; the SPRT's sample size is unbounded unless truncated.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.