LAISHA
Open Laisha

IIT JAM Statistical Inference II: Testing of Hypotheses & Sequential Analysis: practice questions

IIT JAM - Mathematical Statistics (MS) · India · IITs (JAM 2026 organised by IIT Bombay)

Original practice questions written to the published syllabus · not past papers
10worked here, free
59written to this exam in this subject
11syllabus units

About IIT JAM

IIT JAM - Mathematical Statistics (MS) is a postgraduate admission exam run by IITs (JAM 2026 organised by IIT Bombay), for candidates in India. Computer-based, 3 hours, 60 questions, 100 marks, English. Section A 30 MCQs (10 x 1 mark, 20 x 2 marks); Section B 10 MSQs (2 marks, no negative or partial marking); Section C 20 NAT (10 x 1, 10 x 2, no negative). MCQ wrong answers lose 1/3 or 2/3 mark.

Source: jam2026.iitb.ac.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Statistical Inference II: Testing of Hypotheses & Sequential Analysis in IIT JAM

Most powerful critical regions, size and power computations (including discrete and uniform cases), MLR and UMP tests, LRT statistics and their asymptotic chi-square df, and p-values; multiple-select items on which tests are UMP or unbiased.

The logic and optimality of tests: errors and power, the Neyman-Pearson lemma, uniformly most powerful and unbiased tests, likelihood-ratio tests and their large-sample forms, and Wald's sequential probability ratio test.

Our 59 IIT JAM questions in this subject: 18 easy, 29 medium, 12 hard, across 11 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to IIT JAM and are not shown on any other exam's page.

Question 1 · medium

Which property does every most powerful test of size α (0 < α < 1) for simple hypotheses have?

  1. Its power at θ₁ is exactly 1 − α
  2. It never needs randomisation
  3. Power ≥ α at θ₁
  4. Its size equals its power
Answer and working

C. Power ≥ α at θ₁

The MP test is unbiased: the trivial test that rejects with probability α regardless of the data has power α, and the MP test cannot do worse. Randomisation may be needed with discrete data.

Question 2 · medium

X₁, ..., Xₙ are iid N(μ, σ²) with μ known. For H₀: σ² = σ₀² against H₁: σ² = σ₁² with σ₁² > σ₀², the most powerful test rejects when:

  1. Σ(Xᵢ − μ)² is large
  2. X̄ is large
  3. |X̄ − μ| is large
  4. Σ(Xᵢ − μ)² is small
Answer and working

A. Σ(Xᵢ − μ)² is large

log Λ = −(n/2)log(σ₁²/σ₀²) + (1/2)(1/σ₀² − 1/σ₁²)Σ(Xᵢ − μ)², increasing in Σ(Xᵢ − μ)² when σ₁² > σ₀². The test uses χ²ₙ critical values since μ is known.

Question 3 · hard

Five observations come from uniform (0, θ). For H₀: θ ≤ 1 against H₁: θ > 1, the UMP size-0.05 test rejects when X₍₅₎ > c. What is c?

  1. 0.95000
  2. 0.99000
  3. 0.54928
  4. 0.98979
Answer and working

D. 0.98979

P(X₍₅₎ > c | θ = 1) = 1 − c⁵ = 0.05, so c = 0.95^(1/5) = 0.98979. 0.05^(1/5) = 0.54928 would give size 0.95.

Question 4 · easy

For a normal mean with σ unknown, what is the optimality property of the two-sided one-sample t-test?

  1. It is UMP of level α
  2. It is MP against a single alternative only
  3. It is UMPU of level α
  4. It is the Bayes test for every prior
Answer and working

C. It is UMPU of level α

With σ unknown no UMP test exists, but the t-test is uniformly most powerful among unbiased level-α tests (and among invariant tests).

Question 5 · medium

For a normal sample with σ unknown, the likelihood-ratio test of H₀: μ = μ₀ against μ ≠ μ₀ is equivalent to which test?

  1. The two-sided t-test
  2. The chi-square test for the variance
  3. The two-sided z-test with known σ
  4. The sign test for the median
Answer and working

A. The two-sided t-test

Λ = [1 + t²/(n − 1)]^(−n/2), a decreasing function of |t|, so rejecting for small Λ is rejecting for large |t|.

Question 6 · easy

For a normal mean with known σ, how do the Wald, score and likelihood-ratio statistics for H₀: μ = μ₀ compare?

  1. Only the LRT has a χ²₁ distribution
  2. They differ, but agree when n is large
  3. The Wald statistic is twice the score statistic (W = 2S)
  4. They are identical, all equal to n(x̄ − μ₀)²/σ²
Answer and working

D. They are identical, all equal to n(x̄ − μ₀)²/σ²

The log-likelihood is exactly quadratic in μ with constant curvature n/σ², so all three give n(x̄ − μ₀)²/σ², which is exactly χ²₁ under H₀.

Question 7 · medium

When should Welch's t-test be preferred to the pooled two-sample t-test?

  1. When the two population variances differ, especially with unequal sample sizes
  2. When the two samples are paired measurements on the same experimental units or plots
  3. When the data are counts that follow a Poisson distribution in each group
  4. When the sample sizes are large enough for the z-test to be exact
Answer and working

A. When the two population variances differ, especially with unequal sample sizes

Welch's test uses separate variances and Satterthwaite's approximate df, protecting the Type I error rate when variances differ. Paired data need the paired t-test; counts may need a GLM.

Question 8 · medium

The correlation between plant height and grain yield over 27 plots is r = 0.5. What is the t-statistic for H₀: ρ = 0, and its df?

  1. t = 2.500 with 25 df
  2. t = 3.333 with 25 df
  3. t = 3.000 with 27 df
  4. t = 2.887 with 25 df
Answer and working

D. t = 2.887 with 25 df

t = r√(n − 2)/√(1 − r²) = 0.5 × 5/√0.75 = 2.887, with n − 2 = 25 df. Dividing by 1 − r² instead of its square root gives 3.333.

Question 9 · medium

A 99% confidence interval for an effect contains 0, but the 95% interval from the same data does not. What can be said about the two-sided p-value for H₀: effect = 0?

  1. It lies between 0.01 and 0.05
  2. It is above 0.05
  3. It is below 0.01
  4. It is exactly 0.05
Answer and working

A. It lies between 0.01 and 0.05

Excluded from the 95% interval means p < 0.05; included in the 99% interval means p > 0.01.

Question 10 · medium

With 10 independent tests and family-wise level 0.05, what per-test level does Šidák's method use?

  1. 0.00512
  2. 0.99488
  3. 0.05000
  4. 0.00500
Answer and working

A. 0.00512

1 − (1 − 0.05)^(1/10) = 0.00512, slightly above the Bonferroni 0.005 and exact under independence.

A study plan for Statistical Inference II: Testing of Hypotheses & Sequential Analysis in IIT JAM

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (49% of the 59 questions): Neyman-Pearson lemma and most powerful tests (9, 15%); Monotone likelihood ratio and uniformly most powerful tests (7, 12%); Wald and score (Rao) tests (7, 12%); Power and sample-size calculation for common tests (6, 10%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Hypotheses, the two types of error, size and power (5, 8%); Likelihood ratio tests and Wilks' theorem (5, 8%); Relation between tests and confidence intervals (5, 8%); Unbiased tests and UMPU tests for exponential families (5, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Multiple testing: family-wise error rate and false discovery rate (4, 7%); Sequential probability ratio test: OC and ASN functions (4, 7%); Tests based on Z, t, chi-square and F distributions (2, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Unbiased tests and UMPU tests for exponential families (2 hard of 5), Monotone likelihood ratio and uniformly most powerful tests (2 hard of 7), Wald and score (Rao) tests (2 hard of 7).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Likelihood ratio tests and Wilks' theorem (3 easy of 5); Power and sample-size calculation for common tests (3 easy of 6).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — IIT JAM Statistical Inference II: Testing of Hypotheses & Sequential Analysis

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.