IIT JAM - Mathematical Statistics (MS) · India · IITs (JAM 2026 organised by IIT Bombay)
Original practice questions written to the published syllabus · not past papersIIT JAM - Mathematical Statistics (MS) is a postgraduate admission exam run by IITs (JAM 2026 organised by IIT Bombay), for candidates in India. Computer-based, 3 hours, 60 questions, 100 marks, English. Section A 30 MCQs (10 x 1 mark, 20 x 2 marks); Section B 10 MSQs (2 marks, no negative or partial marking); Section C 20 NAT (10 x 1, 10 x 2, no negative). MCQ wrong answers lose 1/3 or 2/3 mark.
Source: jam2026.iitb.ac.in.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Models for counts, proportions and categories: contingency tables, the exponential-family GLM with its link functions, logistic and Poisson regression, log-linear models, overdispersion, ordinal outcomes and generalised linear mixed models, applied to germination, mortality, pest counts and adoption data.
Our 73 IIT JAM questions in this subject: 15 easy, 45 medium, 13 hard, across 11 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to IIT JAM and are not shown on any other exam's page.
Mortality is recorded at five increasing doses. Which test of association uses the order of the doses?
B. The Cochran-Armitage trend test with 1 df
A trend test concentrates power on a monotone dose effect with 1 df, while the general X² spreads it over 4 df. McNemar is for paired binary data; Breslow-Day tests homogeneity of odds ratios across strata.
When is the residual deviance of a single GLM approximately χ²ₙ₋ₚ and usable as a goodness-of-fit test?
A. For grouped data with large counts per observation
The χ² approximation needs large binomial denominators or Poisson means; for ungrouped binary data the deviance depends on the fitted values alone and says nothing about fit.
Which checks of fit suit a logistic model for individual (ungrouped) binary outcomes?
D. Hosmer-Lemeshow test and the area under the ROC curve
For binary data the deviance is not a goodness-of-fit statistic and overdispersion is not identifiable; Hosmer-Lemeshow assesses calibration and the AUC discrimination.
What is the main consequence of ignoring overdispersion in a Poisson or binomial GLM?
D. Standard errors are too small and tests too liberal
The mean model and β̂ are usually fine, but the assumed variance is too small, so SEs are understated and spurious significance results.
For a 2 × 2 × 2 table, how many residual degrees of freedom does the mutual-independence model (X, Y, Z) have?
A. 4
8 cells minus 4 parameters (constant plus one for each variable) = 4. (XZ, YZ) has 2, homogeneous association 1, saturated 0.
Before fitting a zero-inflated model to aphid counts, what should be checked?
B. Whether a NB model explains the zeros
Apparent excess zeros are often just overdispersion; a negative binomial with small k produces many zeros. Comparing observed and predicted zero frequencies settles it.
A logistic GLMM has a random-intercept variance of 2 and a conditional treatment coefficient β. About what is the corresponding marginal (population-averaged) coefficient?
B. 0.77β
β_marginal ≈ β/√(1 + 0.346σ²) = β/√1.692 = 0.77β: marginal effects are attenuated towards zero.
What is the Pearson residual for a Poisson observation y = 7 with fitted mean 4?
D. 1.5
(y − μ̂)/√V(μ̂) = 3/√4 = 1.5. 3 is the raw residual; 1.35 is the deviance residual.
How many degrees of freedom does the Hosmer-Lemeshow statistic have with the usual 10 groups?
D. 8
g − 2 = 8 with g = 10 groups of fitted probability. n − p would apply to the deviance of grouped data.
What is the deviance of the saturated model?
B. 0
The saturated model fits every observation exactly, so its log-likelihood is the maximum possible and D = 0; other models are measured against it.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.