Indian Statistical Service Examination (with Indian Economic Service) · India · Union Public Service Commission
Original practice questions written to the published syllabus · not past papersIndian Statistical Service Examination (with Indian Economic Service) is a government recruitment exam run by Union Public Service Commission, for candidates in India. Written examination of six papers and a viva voce. Reported scheme: General English 100, General Studies 100, Statistics I and II (objective, 200 each), Statistics III and IV (descriptive, 200 each); viva 200.
Official site: upsc.gov.in.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
The logic and optimality of tests: errors and power, the Neyman-Pearson lemma, uniformly most powerful and unbiased tests, likelihood-ratio tests and their large-sample forms, and Wald's sequential probability ratio test.
Our 27 Indian Statistical Service Examination questions in this subject: 6 easy, 15 medium, 6 hard, across 11 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to Indian Statistical Service Examination and are not shown on any other exam's page.
What is the power of a test at a particular alternative θ₁?
B. The probability of rejecting H₀ when θ₁ is the true value
Power = 1 − β(θ₁) = P_θ₁(reject H₀). Accepting H₀ under θ₁ is the Type II error probability β; rejecting a true H₀ has probability α. The posterior probability of H₁ is a Bayesian quantity, not power.
For a fixed sample size, the critical region of a test is made smaller. What happens to the error probabilities?
D. α falls and β rises
A smaller critical region rejects H₀ less often under every θ, so the Type I error probability falls and the Type II error probability rises. Lowering both needs more data or less noise.
X₁, ..., Xₙ are iid N(μ, 1). For H₀: μ = 0 against the two-sided H₁: μ ≠ 0, which statement is correct?
C. No UMP test exists; the two-sided z-test is UMP among unbiased tests
The MP test against μ > 0 rejects for large x̄ and against μ < 0 for small x̄; no single test is best on both sides. The test |Z| > z_(α/2) is UMPU.
Lifetimes are exponential with mean θ. With n = 5 and χ²₁₀ upper 5% point 18.307, the UMP size-0.05 test of H₀: θ ≤ 10 against θ > 10 rejects when ΣXᵢ exceeds what value?
A. 91.535
2ΣXᵢ/θ ~ χ²₂ₙ = χ²₁₀, so reject when 2ΣXᵢ/10 > 18.307, i.e. ΣXᵢ > 10 × 18.307/2 = 91.535. Forgetting the factor 2 gives 183.07; the normal approximation gives 86.78.
For H₀: θ = θ₀ against θ ≠ θ₀ in a one-parameter exponential family with statistic T, the UMPU test rejects when T < c₁ or T > c₂. Which conditions fix c₁ and c₂?
B. Size α at θ₀, and zero derivative of the power function at θ₀
Unbiasedness with a differentiable power function forces a minimum at θ₀: π(θ₀) = α and π′(θ₀) = 0, equivalently E_θ₀[Tφ(T)] = αE_θ₀(T). Equal tails result only when T is symmetric under θ₀.
Ten Poisson counts total 30. What is −2 log Λ for testing H₀: λ = 2 against λ ≠ 2?
A. 4.328
λ̂ = 3. −2 log Λ = 2[ΣX log(λ̂/λ₀) − n(λ̂ − λ₀)] = 2[30 ln 1.5 − 10] = 2[12.164 − 10] = 4.328, compared with χ²₁. 5.000 is the score statistic; 2.164 forgets the factor 2.
A Wald test of H₀: β₂ = β₃ = 0 in a model with 5 coefficients is carried out. What is its asymptotic null distribution?
C. χ² with 2 degrees of freedom
The multiparameter Wald statistic (β̂ − 0)′[Cov(β̂)]⁻¹(β̂ − 0) for the 2 restricted coefficients is χ² with df equal to the number of restrictions, 2.
A 2 × 2 table of adoption (yes/no) by training (yes/no) has cells a = 30, b = 20, c = 10, d = 40. What is Pearson's χ² without continuity correction?
A. 16.67
χ² = n(ad − bc)²/[(a + b)(c + d)(a + c)(b + d)] = 100 × 1000²/(50 × 50 × 40 × 60) = 16.67, with 1 df. With Yates' correction it is 15.04; omitting n gives 0.17.
A sample of 11 plots gives s² = 6. What is the χ² statistic for H₀: σ² = 4?
D. 15.0
χ² = (n − 1)s²/σ₀² = 10 × 6/4 = 15.0, with 10 df. 16.5 uses n = 11 instead of n − 1; 1.5 is the ratio s²/σ₀² alone.
In a contingency table with grand total 200, a cell's row total is 60 and its column total is 40. What is its expected frequency under independence?
D. 12
E = row total × column total/grand total = 60 × 40/200 = 12.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.