LAISHA
Open Laisha

Indian Statistical Service Examination Statistical Quality Control & Reliability: practice questions

Indian Statistical Service Examination (with Indian Economic Service) · India · Union Public Service Commission

Original practice questions written to the published syllabus · not past papers
10worked here, free
84written to this exam in this subject
10syllabus units

About Indian Statistical Service Examination

Indian Statistical Service Examination (with Indian Economic Service) is a government recruitment exam run by Union Public Service Commission, for candidates in India. Written examination of six papers and a viva voce. Reported scheme: General English 100, General Studies 100, Statistics I and II (objective, 200 each), Statistics III and IV (descriptive, 200 each); viva 200.

Official site: upsc.gov.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Statistical Quality Control & Reliability in Indian Statistical Service Examination

Monitoring and accepting quality: Shewhart charts for variables and attributes, CUSUM and EWMA charts, process capability, acceptance sampling plans with their OC, AOQ and ATI curves, and reliability models, applied to seed testing, food processing and input quality. The Agricultural Engineering track covers control charts briefly; this is the full subject.

Our 84 Indian Statistical Service Examination questions in this subject: 22 easy, 44 medium, 18 hard, across 10 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Indian Statistical Service Examination and are not shown on any other exam's page.

Question 1 · medium

An operator resets a filler after every slightly heavy bag, though the process is in control. What is the effect?

  1. Variation increases
  2. Nothing changes
  3. The mean becomes exactly on target
  4. Variation decreases
Answer and working

A. Variation increases

Adjusting for chance variation (tampering, as in Deming's funnel experiment) adds variation instead of removing it.

Question 2 · hard

What is the relationship between a Shewhart chart and hypothesis testing?

  1. Charts and tests are unrelated
  2. The chart estimates the process mean without any test
  3. Each point tests H₀: in control
  4. The chart tests specifications, not the process
Answer and working

C. Each point tests H₀: in control

Points outside limits reject in-control at a small α per point; ARL₀ = 1/α and ARL₁ = 1/power under a shift.

Question 3 · medium

Why should the R chart be checked before the X̄ chart?

  1. The R chart has narrower limits
  2. X̄ limits are built from R̄
  3. Standards require it
  4. The X̄ chart cannot signal alone
Answer and working

B. X̄ limits are built from R̄

If the process spread is out of control, R̄ and hence the X̄ limits misrepresent the process.

Question 4 · medium

Why are attribute charts usually less sensitive than variables charts for the same number of units?

  1. Attribute data cannot be charted over time
  2. Attribute limits are always wider by definition
  3. Pass/fail records carry less information
  4. Variables charts ignore defects
Answer and working

C. Pass/fail records carry less information

A measurement tells how far a unit is from the limit; a pass/fail record discards that.

Question 5 · hard

How is the CUSUM related to Wald's sequential probability ratio test?

  1. It is a single SPRT with no restarts
  2. It is the SPRT for the variance only
  3. A sequence of restarted SPRTs
  4. It is unrelated to sequential testing
Answer and working

C. A sequence of restarted SPRTs

Each excursion of C⁺ is an SPRT of μ₀ versus μ₀ + δ; resetting at zero gives the CUSUM.

Question 6 · hard

For a CUSUM with K = 0.5σ and H = 5σ, what are approximate ARL₀ and ARL for a 1σ shift?

  1. About 100 and about 2
  2. About 465 and about 44
  3. About 370 and about 44
  4. About 465 and about 10
Answer and working

D. About 465 and about 10

Standard tables give ARL₀ ≈ 465 and ARL₁ ≈ 10.4; a Shewhart individuals chart has 370 and about 44.

Question 7 · hard

What does the Cpm index add to Cp?

  1. A one-sided specification
  2. A penalty for missing the target
  3. A non-normality adjustment
  4. A correction for sample size
Answer and working

B. A penalty for missing the target

Cpm = (USL − LSL)/[6√(σ² + (μ − T)²)], reflecting Taguchi's loss about the target.

Question 8 · hard

For n = 50, c = 1 and large lots, approximately what is the AOQL?

  1. 0.0200
  2. 0.0147
  3. 0.0500
  4. 0.0167
Answer and working

D. 0.0167

Maximising p × P_a(p) numerically gives about 0.0167 at p ≈ 0.032. 0.0147 is the AOQ at p = 0.02 only.

Question 9 · hard

What distinguishes a type A OC curve from a type B curve?

  1. Type A has c = 0
  2. Type A uses double sampling; type B single
  3. Type A: isolated lot; type B: process
  4. Type A is for variables plans; type B for attributes
Answer and working

C. Type A: isolated lot; type B: process

Type A treats the lot as a fixed finite population; type B treats items as coming from a process with fraction p.

Question 10 · hard

For a known-σ variables plan with upper limit U, what does the acceptance criterion (U − x̄)/σ ≥ k control?

  1. The probability that x̄ = U
  2. The estimated fraction above U
  3. The range of the sample
  4. The lot size
Answer and working

B. The estimated fraction above U

Under normality, (U − μ)/σ determines the fraction above U; requiring the estimate to exceed k limits that fraction with stated risks.

A study plan for Statistical Quality Control & Reliability in Indian Statistical Service Examination

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (46% of the 84 questions): Control charts for variables: X-bar, R and s charts (11, 13%); OC, AOQ, AOQL, ASN and ATI curves (10, 12%); Acceptance sampling by attributes: single, double and sequential plans (9, 11%); Chance and assignable causes of variation (9, 11%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: CUSUM and EWMA charts (9, 11%); Reliability: hazard rate, series and parallel systems, life testing (9, 11%); Control charts for attributes: p, np, c and u charts (8, 10%); Acceptance sampling by variables (7, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Process capability indices (7, 8%); Six Sigma and design for quality (introduction) (5, 6%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: OC, AOQ, AOQL, ASN and ATI curves (4 hard of 10), CUSUM and EWMA charts (3 hard of 9), Reliability: hazard rate, series and parallel systems, life testing (3 hard of 9).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Process capability indices (3 easy of 7); Control charts for attributes: p, np, c and u charts (3 easy of 8).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Indian Statistical Service Examination Statistical Quality Control & Reliability

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.