SSC Combined Graduate Level - Junior Statistical Officer / Statistical Investigator · India · Staff Selection Commission
Original practice questions written to the published syllabus · not past papersSSC Combined Graduate Level - Junior Statistical Officer / Statistical Investigator is a government recruitment exam run by Staff Selection Commission, for candidates in India. Multi-tier computer-based exam; candidates for Junior Statistical Officer and Statistical Investigator posts take an additional statistics paper.
Official site: ssc.gov.in.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Monitoring and accepting quality: Shewhart charts for variables and attributes, CUSUM and EWMA charts, process capability, acceptance sampling plans with their OC, AOQ and ATI curves, and reliability models, applied to seed testing, food processing and input quality. The Agricultural Engineering track covers control charts briefly; this is the full subject.
Our 28 SSC Combined Graduate Level questions in this subject: 14 easy, 14 medium, 0 hard, across 9 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to SSC Combined Graduate Level and are not shown on any other exam's page.
For a normally distributed statistic, what is the probability of a point falling outside 3-sigma limits when the process is in control?
B. 0.0027
2[1 − Φ(3)] = 0.0027; 0.0013 is one tail only.
Seed lots of 200 seeds average 4% abnormal seedlings. What are the p chart limits?
D. 0 to 0.0816
p̄ ± 3√[p̄(1 − p̄)/n] = 0.04 ± 0.0416; the negative lower limit is set to 0. Omitting n gives a meaningless upper limit; 0.0539 uses 1-sigma limits.
Which chart suits counts of blemishes per tray when the number of fruits per tray varies?
D. u chart
u = defects per unit with limits ū ± 3√(ū/nᵢ) handles varying inspection amounts; the c chart needs a constant unit.
A plan n = 50, c = 1 is applied to large lots that are 2% off-type. What is the probability of acceptance?
A. 0.736
P(d ≤ 1) = 0.98⁵⁰ + 50(0.02)(0.98)⁴⁹ = 0.364 + 0.372 = 0.736. 0.364 counts d = 0 only.
In acceptance sampling, what is the producer's risk?
B. The probability of rejecting a lot of AQL quality
Producer's risk α is the chance a good (AQL) lot is rejected; accepting a bad (LTPD) lot is the consumer's risk β.
Which distribution gives exact acceptance probabilities for a small isolated lot sampled without replacement?
C. Hypergeometric
Sampling without replacement from N items with D defectives is hypergeometric; binomial and Poisson approximate it for large lots.
Subgroups of 5 give s̄ = 0.30 kg; c₄ = 0.940. What is σ̂?
A. 0.319 kg
σ̂ = s̄/c₄ = 0.30/0.940 = 0.319; dividing by d₂ applies the range constant to s.
A centred process has Cp = 2. How far is each specification limit from the mean?
C. 6σ
Cp = (USL − LSL)/6σ = 2 gives a width of 12σ, i.e. 6σ each side.
What is the consumer's risk in acceptance sampling?
D. Accepting a lot of LTPD quality
β = P(accept | p = LTPD); α concerns rejecting AQL lots.
A process with specification limits at ±6σ and no mean shift has about what defect rate?
B. 0.002 per million
2[1 − Φ(6)] ≈ 2 × 10⁻⁹, i.e. 0.002 ppm; 3.4 ppm assumes the conventional 1.5σ shift.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.