ASRB Agricultural Research Service (ARS) - Agricultural Statistics scientist · India · Agricultural Scientists Recruitment Board (ICAR)
Original practice questions written to the published syllabus · not past papersASRB Agricultural Research Service (ARS) - Agricultural Statistics scientist is a government recruitment exam run by Agricultural Scientists Recruitment Board (ICAR), for candidates in India. Combined NET/ARS/SMS/STO recruitment: preliminary (objective), mains (descriptive, discipline paper) and interview for ARS.
Official site: asrb.org.in.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Monitoring and accepting quality: Shewhart charts for variables and attributes, CUSUM and EWMA charts, process capability, acceptance sampling plans with their OC, AOQ and ATI curves, and reliability models, applied to seed testing, food processing and input quality. The Agricultural Engineering track covers control charts briefly; this is the full subject.
Our 35 ASRB Agricultural Research Service questions in this subject: 2 easy, 25 medium, 8 hard, across 10 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ASRB Agricultural Research Service and are not shown on any other exam's page.
A dairy's fat chart signals constantly after the season changes, though nothing in the plant has changed. What is a sensible response?
B. Adjust for the raw-material input
The input (milk composition) changed; charting output adjusted for known input effects separates plant problems from raw-material variation.
Weed-seed counts cluster, with variance well above the mean. What happens with Poisson-based c chart limits?
A. Too narrow: false alarms
Overdispersion makes real variation exceed √c̄; empirical or negative-binomial limits are needed.
Defects occur at about 1 per 1,000 units. Why are charts of units between defects preferred to c charts on subgroups of 100?
A. Most subgroups show zero defects
With c̄ = 0.1, nearly every point is 0; geometric (g) charts of counts between events detect rate changes far better.
A filler has specifications 98-102 g and σ = 0.5 g. What is Cp?
B. 1.33
Cp = (102 − 98)/(6 × 0.5) = 1.33.
A filler has specifications 98-102 g, mean 100.5 g and σ = 0.5 g. What is Cpk?
A. 1.00
Cpk = min(1.5/1.5, 2.5/1.5) = 1.00; 1.67 uses the farther limit; 1.33 is Cp, which ignores centring.
A sample Cpk of 1.33 is computed from 50 observations. What is the main caution?
D. Its lower bound is near 1.1
Estimated indices have sizeable sampling error; contracts should specify sample sizes or confidence bounds.
A variables plan for grain moisture (upper limit 14%, known σ = 0.5%) uses n = 10 and k = 1.8. A sample mean is 13.3%. What is the decision?
A. Reject, since 13.3 > 14 − 1.8 × 0.5 = 13.1
(U − x̄)/σ = 0.7/0.5 = 1.4 < k = 1.8, so reject; being below the specification limit is not enough.
A supplier complains that a lot was rejected though no sampled item exceeded the limit. Under which plan type can this happen?
B. A variables plan
Variables plans reject when x̄ is too close to the limit relative to σ, even if every item conforms.
Germination testing is destructive and slow. Why might a variables approach be attractive if a suitable continuous measure exists?
D. Fewer items are needed
Fewer test units cut destructive testing cost, provided the measure is approximately normal.
What do the letters of DMAIC stand for?
A. Define, Measure, Analyse, Improve, Control
DMAIC is the Six Sigma improvement cycle.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.