LAISHA
Open Laisha

GATE XL Mathematics & Statistics for Dairy Science: practice questions

GATE — Life Sciences (XL) with Section U Food Technology · India · IITs and IISc on rotation (2027: IIT Madras)

Original practice questions written to the published syllabus · not past papers
10worked here, free
34written to this exam in this subject
8syllabus units

About GATE XL

GATE — Life Sciences (XL) with Section U Food Technology is a postgraduate admission exam run by IITs and IISc on rotation (2027: IIT Madras), for candidates in India. Computer-based, 3 hours, 100 marks: General Aptitude 15, Section P Chemistry (compulsory) 25, and two optional sections of 30 marks each. MCQ, MSQ and NAT; −1/3 or −2/3 on wrong MCQs only; no partial credit on MSQ.

Source: gate2026.iitg.ac.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Mathematics & Statistics for Dairy Science in GATE XL

The calculus, differential equations and statistics that dairy engineering problems, kinetics and quality control need.

Our 34 GATE XL questions in this subject: 5 easy, 27 medium, 2 hard, across 8 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to GATE XL and are not shown on any other exam's page.

Question 1 · medium

What is the inverse of the matrix with rows (2, 1) and (5, 3)?

  1. Rows (3, 1) and (5, 2)
  2. Rows (3, −1) and (−5, 2)
  3. Rows (−3, 1) and (5, −2)
  4. Rows (2, −5) and (−1, 3)
Answer and working

B. Rows (3, −1) and (−5, 2)

det = 2×3 − 1×5 = 1. The inverse is (1/det) × rows (d, −b) and (−c, a) = rows (3, −1) and (−5, 2). Check: (2,1)·(3,−5) = 1. Swapping without changing signs, or transposing, gives the wrong forms.

Question 2 · medium

The cost per metre of insulating a pipe is C(t) = 50t + 2/t (t in m). At what thickness is the total cost a minimum?

  1. 0.04 m
  2. 0.5 m
  3. 0.2 m
  4. 5 m
Answer and working

C. 0.2 m

dC/dt = 50 − 2/t² = 0 gives t² = 0.04, t = 0.2 m. d²C/dt² = 4/t³ > 0, so it is a minimum. 0.04 m is t², not t.

Question 3 · medium

For first-order inactivation, the decimal reduction time D and the rate constant k (per min) are related by:

  1. D = 2.303/k
  2. D = 0.693/k
  3. D = k/2.303
  4. D = 1/k
Answer and working

A. D = 2.303/k

log₁₀(N₀/N) = kt/2.303, so one log cycle (tenfold) takes D = 2.303/k. 0.693/k is the half-life.

Question 4 · hard

Lethal rates logged every 2 min during a heat process are 0.1, 0.6, 0.9, 0.5 and 0.1 (min of reference process per min). What is the F value by the trapezoidal rule?

  1. 4.27 min
  2. 4.2 min
  3. 2.2 min
  4. 4.4 min
Answer and working

B. 4.2 min

Trapezoidal: h(½y₀ + y₁ + y₂ + y₃ + ½y₄) = 2(0.05 + 0.6 + 0.9 + 0.5 + 0.05) = 4.2 min. Simpson's rule gives 4.27 min; multiplying the plain sum by h (4.4) counts the end points twice their weight.

Question 5 · medium

Pouches are defective with probability 0.02, independently. What is the probability that a sample of 20 contains no defective pouch?

  1. 0.980
  2. 0.600
  3. 0.668
  4. 0.332
Answer and working

C. 0.668

Binomial with x = 0: (1 − 0.02)²⁰ = 0.98²⁰ = 0.668. 0.980 is for a single pouch; 0.332 is the probability of at least one defective.

Question 6 · medium

Log₁₀ counts of spores heated at 110 °C fall linearly with a slope of −0.25 per minute. What is D₁₁₀?

  1. 0.25 min
  2. 2.5 min
  3. 9.2 min
  4. 4 min
Answer and working

D. 4 min

D = −1/slope = 1/0.25 = 4 min. 0.25 is the slope itself; 9.2 min would come from 2.303/0.25 with natural logs.

Question 7 · medium

The least-squares regression line of y on x always passes through:

  1. The origin (0, 0)
  2. The first and last data points
  3. The point of maximum y
  4. The point (x̄, ȳ)
Answer and working

D. The point (x̄, ȳ)

Since a = ȳ − b x̄, substituting x = x̄ gives y = ȳ. The line passes through the origin only if forced or by coincidence.

Question 8 · medium

A central composite design for two factors with five centre points has how many runs?

  1. 13
  2. 9
  3. 11
  4. 15
Answer and working

A. 13

2² = 4 factorial points + 2 × 2 = 4 axial points + 5 centre points = 13. Nine is a 3² full factorial.

Question 9 · medium

A fitted model for ice cream creaminess is y = 7 + 0.6x₁ + 0.4x₂ − 0.5x₁² − 0.2x₂² + 0.1x₁x₂ in coded units. The x₁x₂ term represents:

  1. The curvature in factor x₁ alone
  2. The pure experimental error
  3. The intercept at the design centre
  4. The interaction between the two factors
Answer and working

D. The interaction between the two factors

Cross-product terms describe interaction: the effect of x₁ depends on x₂. Squared terms describe curvature; the constant 7 is the predicted response at the centre.

Question 10 · medium

Optimising several responses at once, such as creaminess, melt resistance and cost of an ice cream, is commonly done with:

  1. A desirability function combining each response on a 0–1 scale
  2. A chi-square test of the responses
  3. A separate t-test for each response
  4. A Latin square of the three responses
Answer and working

A. A desirability function combining each response on a 0–1 scale

Derringer's desirability approach converts each response to 0 (unacceptable) to 1 (ideal) and maximises their geometric mean. The optimum must then be confirmed experimentally.

A study plan for Mathematics & Statistics for Dairy Science in GATE XL

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (47% of the 34 questions): Numerical methods for engineering problems (6, 18%); Correlation and regression (5, 15%); Introduction to response surface methodology for product optimisation (5, 15%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Matrices and linear equations (5, 15%); Ordinary differential equations: first-order kinetics and cooling (5, 15%); Differential and integral calculus (3, 9%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Sampling theory and confidence intervals (3, 9%); Descriptive statistics and probability distributions (2, 6%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Correlation and regression (1 hard of 5), Numerical methods for engineering problems (1 hard of 6).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Numerical methods for engineering problems (2 easy of 6); Introduction to response surface methodology for product optimisation (1 easy of 5).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — GATE XL Mathematics & Statistics for Dairy Science

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.