LAISHA
Open Laisha

Food Safety Officer recruitment Dairy Analysis & Instrumental Methods: practice questions

Food Safety Officer recruitment (state PSCs and FSSAI) · India · State public service commissions; FSSAI for central posts

Original practice questions written to the published syllabus · not past papers
10worked here, free
17written to this exam in this subject
6syllabus units

About Food Safety Officer recruitment

Food Safety Officer recruitment (state PSCs and FSSAI) is a government recruitment exam run by State public service commissions; FSSAI for central posts, for candidates in India. Each commission sets its own written test.

Official site: fssai.gov.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Dairy Analysis & Instrumental Methods in Food Safety Officer recruitment

Sampling procedure under food law, common adulterants and their detection, platform tests and the interpretation of results for enforcement.

Testing milk and dairy products: platform tests, reference methods, adulterant detection and modern instruments.

Our 17 Food Safety Officer recruitment questions in this subject: 8 easy, 8 medium, 1 hard, across 6 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Food Safety Officer recruitment and are not shown on any other exam's page.

Question 1 · easy

Why must milk in a can be mixed thoroughly before a sample is taken for fat testing?

  1. Fat rises on standing
  2. Mixing raises the temperature to 40 degrees Celsius
  3. Lactose settles at the bottom of the can
  4. Mixing removes dissolved gases that affect the fat test
Answer and working

A. Fat rises on standing

Cream rises, so an unmixed sample from the top or bottom gives a wrong fat value.

Question 2 · easy

Which tool is used to take a core sample from a block of butter or cheese?

  1. A plunger
  2. A trier
  3. A lactometer
  4. A pipette
Answer and working

B. A trier

A trier (borer) removes a core through the product; plungers mix milk in cans.

Question 3 · medium

In enforcement sampling under food law, why is the sample divided into several sealed parts?

  1. So that parts can be retained for referee analysis if the result is disputed
  2. So that the seller can sell the remaining parts after sampling
  3. So that each part can be tested by a different method in the same laboratory
  4. So that the total quantity tested is reduced to save reagents
Answer and working

A. So that parts can be retained for referee analysis if the result is disputed

One part goes to the food analyst and others are retained for appeal or referee analysis, as the law prescribes.

Question 4 · easy

Milk forms clots when a sample is boiled in the clot-on-boiling test. What does this usually indicate?

  1. High developed acidity
  2. Added water from rinsing
  3. High fat content in the milk
  4. Added cane sugar
Answer and working

A. High developed acidity

COB-positive milk has developed acidity roughly above 0.2% lactic acid, or is colostral or abnormal.

Question 5 · easy

A blue colour after adding iodine to boiled and cooled milk indicates:

  1. Formalin
  2. Starch
  3. Urea
  4. Cane sugar
Answer and working

B. Starch

Iodine forms a blue complex with starch.

Question 6 · easy

In the resorcinol (Seliwanoff) test, milk turns red on heating with resorcinol and hydrochloric acid. Which adulterant is indicated?

  1. Starch
  2. Hydrogen peroxide
  3. Cane sugar
  4. Neutraliser
Answer and working

C. Cane sugar

Sucrose contains fructose, which gives the red colour.

Question 7 · medium

Which reagent detects urea in milk by forming a yellow colour?

  1. Rosalic acid
  2. Iodine
  3. Turmeric paper dipped in milk
  4. p-Dimethylaminobenzaldehyde
Answer and working

D. p-Dimethylaminobenzaldehyde

DMAB reacts with urea; rosalic acid detects neutralisers.

Question 8 · medium

How are anionic detergents in milk detected?

  1. With turmeric paper, which turns red
  2. With iodine solution, which turns black in the presence of any anionic detergent at once
  3. With rosalic acid, which turns rose-red
  4. With methylene blue and chloroform, the blue colour moving into the chloroform layer
Answer and working

D. With methylene blue and chloroform, the blue colour moving into the chloroform layer

Anionic detergents form a chloroform-soluble complex with methylene blue.

Question 9 · medium

The Codex maximum level for lead in milk is:

  1. 0.2 grams per kilogram
  2. 20 milligrams per kilogram
  3. 2 milligrams per kilogram
  4. 0.02 milligrams per kilogram
Answer and working

D. 0.02 milligrams per kilogram

Codex ML for lead in milk is 0.02 mg/kg, i.e. 20 ug/kg.

Question 10 · medium

The limit for aflatoxin M1 in milk set by Codex and India is:

  1. 0.005 micrograms per kilogram
  2. 0.05 micrograms per kilogram
  3. 5 milligrams per kilogram
  4. 0.5 micrograms per kilogram
Answer and working

D. 0.5 micrograms per kilogram

Codex, US and FSSAI use 0.5 ug/kg; the EU is stricter.

A study plan for Dairy Analysis & Instrumental Methods in Food Safety Officer recruitment

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (65% of the 17 questions): Detection of adulterants: water, starch, urea, neutralisers, detergent, vegetable fat (7, 41%); Sampling of milk and dairy products (4, 24%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Platform tests: organoleptic, COB, alcohol, sediment, lactometer (3, 18%); Aflatoxin M1 detection (1, 6%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Antibiotic, pesticide and heavy-metal residue testing (1, 6%); Ghee and butter fat adulteration: BR reading, Reichert-Meissl and Polenske values, sterol tests (1, 6%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Platform tests: organoleptic, COB, alcohol, sediment, lactometer (1 hard of 3).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Ghee and butter fat adulteration: BR reading, Reichert-Meissl and Polenske values, sterol tests (1 easy of 1); Platform tests: organoleptic, COB, alcohol, sediment, lactometer (2 easy of 3).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Food Safety Officer recruitment Dairy Analysis & Instrumental Methods

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.