LAISHA
Open Laisha

Food Safety Officer recruitment Quality Assurance, Statistical Quality Control & Laboratory Management: practice questions

Food Safety Officer recruitment (state PSCs and FSSAI) · India · State public service commissions; FSSAI for central posts

Original practice questions written to the published syllabus · not past papers
10worked here, free
15written to this exam in this subject
4syllabus units

About Food Safety Officer recruitment

Food Safety Officer recruitment (state PSCs and FSSAI) is a government recruitment exam run by State public service commissions; FSSAI for central posts, for candidates in India. Each commission sets its own written test.

Official site: fssai.gov.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Quality Assurance, Statistical Quality Control & Laboratory Management in Food Safety Officer recruitment

Laboratory management and accreditation (NABL and ISO/IEC 17025), method validation terms (LOD, LOQ, recovery, repeatability), measurement uncertainty, laboratory safety and chemical handling, sampling plans for official samples, and shelf-life and date marking.

Quality systems, statistical process control, sampling inspection and running an accredited dairy laboratory.

Our 15 Food Safety Officer recruitment questions in this subject: 8 easy, 4 medium, 3 hard, across 4 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Food Safety Officer recruitment and are not shown on any other exam's page.

Question 1 · hard

A single sampling plan inspects n = 50 bags of powder from a large lot and accepts if c ≤ 1 defective bag. Using the Poisson approximation, what is the probability of accepting a lot that is 2% defective?

  1. 0.920
  2. 0.736
  3. 0.368
  4. 0.264
Answer and working

B. 0.736

λ = np = 50 × 0.02 = 1; Pa = e⁻¹(1 + 1) = 0.736. 0.368 is P(0) only; 0.264 is the probability of rejection; 0.920 is P(≤2).

Question 2 · easy

In acceptance sampling, the producer's risk is the probability of:

  1. Finding no defectives in a perfect lot
  2. Rejecting a lot whose quality is at the AQL
  3. Shipping a defective unit to a consumer
  4. Accepting a lot whose quality is at the LTPD
Answer and working

B. Rejecting a lot whose quality is at the AQL

Producer's risk (α) is the chance a good lot, at the AQL, is rejected; it is often designed at about 5%. Accepting a lot at the LTPD is the consumer's risk (β).

Question 3 · easy

The consumer's risk in an acceptance sampling plan is the probability of:

  1. Accepting a lot at the limiting quality, the LTPD
  2. Rejecting a lot whose quality is at the acceptable quality level
  3. A consumer complaint arising from any accepted lot
  4. Rejecting a lot that contains no defective units at all
Answer and working

A. Accepting a lot at the limiting quality, the LTPD

Consumer's risk (β) is the probability of accepting a poor lot at the LTPD (limiting quality), often designed at about 10%. Rejecting a lot at the AQL is producer's risk.

Question 4 · easy

How do ISO 2859-1 and ISO 3951 differ?

  1. ISO 2859-1 gives OC curves only; ISO 3951 gives sample sizes only
  2. ISO 2859-1 applies to isolated lots; ISO 3951 to continuous production only
  3. ISO 2859-1 is for microbiological tests; ISO 3951 covers only chemical tests of milk
  4. ISO 2859-1 is for attributes; ISO 3951 is for variables and assumes normality
Answer and working

D. ISO 2859-1 is for attributes; ISO 3951 is for variables and assumes normality

ISO 2859-1 (from MIL-STD-105) gives attribute plans indexed by AQL; ISO 3951 (from MIL-STD-414) gives variables plans, which need smaller samples but assume a normal distribution of the characteristic.

Question 5 · medium

A three-class microbiological plan has n = 5, c = 2, m = 10⁴ cfu/g and M = 10⁵ cfu/g. Results: three below m, two between m and M, none above M. The lot is:

  1. Rejected, because two results exceed the lower limit m
  2. Accepted: none exceeds M and only two lie between m and M
  3. Accepted only if all five results are re-tested and fall below m
  4. Rejected, because the mean of five results must stay below m
Answer and working

B. Accepted: none exceeds M and only two lie between m and M

In a three-class plan the lot is rejected if any result exceeds M or more than c results lie between m and M. Here no result exceeds M and two (equal to c) lie between m and M, so it is accepted.

Question 6 · medium

Which storage arrangement is correct for a dairy laboratory?

  1. Oxidisers kept away from flammable solvents, acids apart from bases
  2. All chemicals stored together in alphabetical order on open shelves
  3. Flammable solvents kept on high shelves to stay away from floor spills
  4. Concentrated acids stored above eye level for easy pouring
Answer and working

A. Oxidisers kept away from flammable solvents, acids apart from bases

Chemicals are stored by compatibility: oxidisers away from flammables and organics, acids apart from bases, solvents in flammable-storage cabinets, and concentrated acids low down in secondary containment. Alphabetical storage can place incompatible chemicals together.

Question 7 · easy

In the hierarchy of controls for laboratory hazards, which is considered the last line of defence?

  1. Substitution with a less hazardous chemical
  2. Elimination of the hazardous step
  3. Personal protective equipment
  4. Engineering controls such as fume cupboards
Answer and working

C. Personal protective equipment

The hierarchy runs elimination, substitution, engineering controls, administrative controls and finally PPE, which protects only the wearer and depends on correct use.

Question 8 · easy

What is the key difference between laboratory accreditation and ISO 9001 certification?

  1. Accreditation attests technical competence for specified tests
  2. Certification is required before accreditation can be granted
  3. Accreditation is cheaper and needs no on-site assessment
  4. Accreditation applies to the whole company, certification to one test
Answer and working

A. Accreditation attests technical competence for specified tests

Accreditation to ISO/IEC 17025 assesses competence for each test in the laboratory's scope; certification attests that a management system meets ISO 9001. Accreditation involves on-site assessment and does not require prior certification.

Question 9 · easy

Under Codex labelling texts, a 'use-by' date differs from a 'best before' date because it is set for:

  1. Optimum quality only, after which the food may still be eaten
  2. The date the product was packed in the factory
  3. Safety, after which the food should not be sold or eaten
  4. The last day the retailer may display a price promotion
Answer and working

C. Safety, after which the food should not be sold or eaten

'Use-by' marks the end of the period after which a perishable food should not be sold or consumed for safety reasons; 'best before' marks the end of optimum quality. National rules on date marking differ.

Question 10 · medium

Short shelf life of HTST pasteurised milk with Gram-negative spoilage flora usually points to:

  1. Too high a pasteurisation temperature for the milk
  2. Excess fat in the standardised milk
  3. Post-pasteurisation contamination in filling or pipework
  4. Survival of Gram-negative rods through correct pasteurisation
Answer and working

C. Post-pasteurisation contamination in filling or pipework

Gram-negative psychrotrophs such as Pseudomonas are killed by correct pasteurisation, so their presence in packed milk indicates recontamination after heating. Heat-resistant spore-formers are the typical limit in well-sealed systems.

A study plan for Quality Assurance, Statistical Quality Control & Laboratory Management in Food Safety Officer recruitment

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (73% of the 15 questions): Acceptance sampling plans (6, 40%); Laboratory set-up, safety and chemical management (5, 33%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Shelf-life determination (3, 20%); ISO/IEC 17025 and laboratory accreditation (1, 7%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Leave time for the hard ones: Acceptance sampling plans (2 hard of 6), Shelf-life determination (1 hard of 3).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  4. Bank the easy marks: ISO/IEC 17025 and laboratory accreditation (1 easy of 1); Laboratory set-up, safety and chemical management (3 easy of 5).

    Do these early in revision so they are fast on the day.

  5. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Food Safety Officer recruitment Quality Assurance, Statistical Quality Control & Laborator

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.