State Forest Service — Assistant Conservator of Forests (state PSC exams) · India · State Public Service Commissions (e.g. TNPSC, MPPSC, UPPSC, HPPSC, KPSC, MPSC)
Original practice questions written to the published syllabus · not past papersState Forest Service — Assistant Conservator of Forests (state PSC exams) is a government recruitment exam run by State Public Service Commissions (e.g. TNPSC, MPPSC, UPPSC, HPPSC, KPSC, MPSC), for candidates in India. Typically a preliminary objective paper, a written main examination including forestry or science optional papers, and an interview, plus physical tests.
Official site: tnpsc.gov.in.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Short numerical problems: girth to diameter, basal area per hectare, log volume, quarter-girth volume, form factor volume, MAI and PAI, and definitions of top height and site quality.
Measuring single trees, logs and stands: diameter, height, form, volume, biomass and growth, with the instruments and formulas used in the field.
Our 41 State Forest Service questions in this subject: 15 easy, 24 medium, 2 hard, across 13 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to State Forest Service and are not shown on any other exam's page.
What is the basal area of a tree of 40 cm dbh?
D. 0.1257 m²
g = π d² / 4 = 3.1416 × 0.40² / 4 = 0.1257 m². Using the diameter as a radius (π × 0.4²) gives 0.5027 m², four times too large; 0.2513 m² is π × d × r, which mixes up area formulas.
Using Huber's formula, what is the volume of a log 5 m long with a mid-diameter of 30 cm?
C. 0.353 m³
Huber: V = g_m × L = (π × 0.30² / 4) × 5 = 0.07069 × 5 = 0.353 m³. Using π r² with r = 0.30 m gives 1.414 m³, four times too much.
A tree has dbh 32 cm and a diameter of 22 cm at half its total height. What is its form quotient (Schiffel)?
B. 0.69
Form quotient = diameter at half height ÷ dbh = 22 ÷ 32 = 0.69. Inverting gives 1.45; squaring gives the ratio of cross-sectional areas, 0.47, which is not the form quotient.
Before a newly built volume table is adopted, it should be tested by:
B. Comparing its predictions with measured volumes of independent trees
Validation on independent data reveals bias and precision across diameter classes. Refitting on the same data proves nothing about performance elsewhere.
A circular plot of radius 11.28 m contains 14 trees. About how many stems per hectare does this represent?
B. 350
Plot area = π × 11.28² = 399.7 m² ≈ 400 m²; expansion factor = 10 000 / 400 = 25; N = 14 × 25 ≈ 350 stems/ha. 1400 treats the plot as 0.01 ha.
Top height is defined for a yield table as the mean height of the 100 largest-diameter trees per hectare. How many trees should be measured for top height on a 0.04 ha plot?
D. 4
100 trees per hectare × 0.04 ha = 4 trees: the four largest-diameter trees on the plot. Measuring 100 trees per plot would mean the tallest 2500 per hectare.
A stand has 24 m²/ha of basal area, a mean height of 18 m and a stand form factor of 0.45. What is its approximate volume per hectare?
D. 194.4 m³/ha
V = G × H × f = 24 × 18 × 0.45 = 194.4 m³/ha. Omitting the form factor gives 432 m³/ha; dividing by it gives 960.
With a BAF of 2 m²/ha, what is the limiting distance for a tree of 30 cm dbh, using R (m) = d (cm) / (2√BAF)?
A. 10.6 m
R = 30 / (2 × √2) = 30 / 2.828 = 10.6 m. A tree of that size farther than this from the point is out. 15.0 m is d/2, the limiting distance for BAF 1; 21.2 m omits the factor of 2.
Angle-count (Bitterlich) sampling selects trees with probability proportional to their:
C. Basal area
Each tree's inclusion circle has a radius proportional to its diameter, so its area — and the chance of the point falling inside it — is proportional to the tree's basal area. That is why each counted tree contributes the same basal area per hectare.
On an increment core, the outermost 10 rings span 25 mm of radius. What was the average annual diameter growth inside bark over that decade?
D. 5.0 mm/yr
Diameter growth = 2 × radial growth = 50 mm in 10 years = 5.0 mm/yr. 2.5 mm/yr is the radial growth rate only.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.