State Forest Service Forest Operations, Harvesting & Forest Engineering: practice questions
State Forest Service — Assistant Conservator of Forests (state PSC exams) · India · State Public Service Commissions (e.g. TNPSC, MPPSC, UPPSC, HPPSC, KPSC, MPSC)
Original practice questions written to the published syllabus · not past papers
10worked here, free
34written to this exam in this subject
12syllabus units
About State Forest Service
State Forest Service — Assistant Conservator of Forests (state PSC exams) is a government recruitment exam run by State Public Service Commissions (e.g. TNPSC, MPPSC, UPPSC, HPPSC, KPSC, MPSC), for candidates in India. Typically a preliminary objective paper, a written main examination including forestry or science optional papers, and an interview, plus physical tests.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Forest Operations, Harvesting & Forest Engineering in State Forest Service
Felling rules, extraction methods including elephants and slides, timber depots, transit passes and log measurement.
Getting wood from stump to mill safely and with least damage: harvest planning, felling and extraction systems, forest roads, transport, ergonomics and reduced-impact logging. The Agricultural Engineering track (aquacultural-forest-engineering) introduces roads and logging machinery in a few units; this subject treats forest operations in full.
Our 34 State Forest Service questions in this subject: 11 easy, 23 medium, 0 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to State Forest Service and are not shown on any other exam's page.
Question 1 · easy
A landing in forest harvesting is:
The place where the forest guard lives during the harvest season
Where logs are collected for loading
A cleared helicopter pad used only for fire fighting
The point where a skid trail crosses a stream
Answer and working
B. Where logs are collected for loading
Landings (log decks) are where logs are sorted, stored and loaded.
Question 2 · medium
The strip of uncut wood that guides a falling tree is the:
Hinge
Notch
Back cut
Kerf
Answer and working
A. Hinge
It must never be cut through.
Question 3 · medium
Chainsaw noise commonly exceeds:
10 dB
100 dB
40 dB
60 dB
Answer and working
B. 100 dB
Hearing protection is essential.
Question 4 · easy
A forwarder extracts logs by:
Dragging them along the ground with chokers
Lifting them by helicopter
Floating them down streams
Carrying them clear of the ground
Answer and working
D. Carrying them clear of the ground
Forwarders load logs into a bunk with a crane.
Question 5 · medium
Parallel forest roads are spaced 400 m apart. What is the road density?
25 m/ha
4 m/ha
400 m/ha
2.5 m/ha
Answer and working
A. 25 m/ha
Road density = 10 000 ÷ 400 = 25 m/ha.
Question 6 · easy
A forest road rises 12 m over 150 m of horizontal distance. What is its grade?
12%
80%
8%
1.25%
Answer and working
C. 8%
Grade = 12 ÷ 150 × 100 = 8%.
Question 7 · easy
Most timber today is transported by:
River floating
Road
Elephants
Aerial ropeways
Answer and working
B. Road
Log trucks dominate modern transport.
Question 8 · medium
In India, movement of timber requires:
Export licences only
No documents
CITES permits for all species
Transit passes
Answer and working
D. Transit passes
State transit rules under the Indian Forest Act control movement.
Question 9 · medium
A forest road rising 6 m over a horizontal distance of 120 m has a gradient of:
Felled, delimbed and cut into logs at the stump, then forwarded
Chipped standing
Answer and working
C. Felled, delimbed and cut into logs at the stump, then forwarded
Harvesters process trees at the stump; branches stay on the site as mats that protect soil, and forwarders carry logs clear of the ground.
A study plan for Forest Operations, Harvesting & Forest Engineering in State Forest Service
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (41% of the 34 questions): Forest road planning, location and grades (4, 12%); Harvest planning and layout (4, 12%); Ergonomics and occupational safety in forest work (3, 9%); Extraction: skidding, forwarding, cable logging, animal and aerial extraction (3, 9%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Felling: manual, motor-manual and mechanised; directional felling (3, 9%); Harvesting systems: cut-to-length and whole-tree (3, 9%); Log scaling, sorting and landing operations (3, 9%); Timber transport: road, water, rail (3, 9%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Chainsaw use and safety (2, 6%); Forest bridges and simple structures (2, 6%); Reduced-impact logging and soil protection (2, 6%); Road construction, drainage and maintenance (2, 6%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Bank the easy marks: Harvest planning and layout (2 easy of 4); Forest bridges and simple structures (1 easy of 2).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.