LAISHA
Open Laisha

Indian Forest Service Examination Forest Operations, Harvesting & Forest Engineering: practice questions

Indian Forest Service Examination (IFoS) — Forestry optional · India · Union Public Service Commission

Original practice questions written to the published syllabus · not past papers
10worked here, free
41written to this exam in this subject
12syllabus units

About Indian Forest Service Examination

Indian Forest Service Examination (IFoS) — Forestry optional is a government recruitment exam run by Union Public Service Commission, for candidates in India. Three stages: the Civil Services (Preliminary) Examination as a screening test; a written Main examination of six conventional papers (General English 300, General Knowledge 300, and two optional subjects of two papers each at 200 marks, 1,400 in all); and a 300-mark personality test.

Official site: upsc.gov.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Forest Operations, Harvesting & Forest Engineering in Indian Forest Service Examination

Getting wood from stump to mill safely and with least damage: harvest planning, felling and extraction systems, forest roads, transport, ergonomics and reduced-impact logging. The Agricultural Engineering track (aquacultural-forest-engineering) introduces roads and logging machinery in a few units; this subject treats forest operations in full.

Our 41 Indian Forest Service Examination questions in this subject: 5 easy, 23 medium, 13 hard, across 12 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Indian Forest Service Examination and are not shown on any other exam's page.

Question 1 · medium

The chain brake on a chainsaw is activated by:

  1. Pulling the starter cord twice quickly
  2. Releasing the choke
  3. Opening the fuel cap
  4. The front hand guard or inertia
Answer and working

D. The front hand guard or inertia

It stops the chain within a fraction of a second.

Question 2 · medium

In a skyline system, logs are carried by:

  1. A carriage running on a cable
  2. A truck running on a parallel forest road
  3. A forwarder bunk
  4. An elephant harness
Answer and working

A. A carriage running on a cable

The skyline is stretched between tower and tailhold.

Question 3 · medium

A cable skidder brings logs to itself using:

  1. Chokers and a winch cable
  2. A hydraulic grapple only, with no cable
  3. A crane and bunk
  4. A conveyor belt
Answer and working

A. Chokers and a winch cable

Grapple skidders pick up bunches directly.

Question 4 · medium

A soil benefit of cut-to-length harvesting is that:

  1. All branches are removed from the site for burning
  2. No machines enter the stand
  3. Logs are dragged on bare soil
  4. Branches form brush mats on machine trails
Answer and working

D. Branches form brush mats on machine trails

Brush mats spread load and return nutrients.

Question 5 · hard

Whole-tree systems can supply energy markets because they:

  1. Residues pile up at the landing
  2. They leave all residues spread in the stand
  3. They burn residues at each stump
  4. They produce no residues at all
Answer and working

A. Residues pile up at the landing

Residue at landings is easy to chip.

Question 6 · medium

An outsloped road surface sheds water:

  1. Towards the downhill side
  2. Towards an uphill ditch on the inside
  3. Towards the centre
  4. Into the nearest stream
Answer and working

A. Towards the downhill side

Insloped roads drain to an uphill ditch.

Question 7 · hard

Full-bench road construction on steep slopes means:

  1. Placing all material as fill on the downhill side
  2. Building the road on piles over the slope
  3. Paving the surface with concrete slabs
  4. Cutting the full width into the slope
Answer and working

D. Cutting the full width into the slope

It avoids unstable sidecast fill.

Question 8 · medium

In India, round timber has traditionally been measured by:

  1. Mid-girth and length
  2. Weight on a weighbridge only
  3. Top diameter only
  4. Number of rings
Answer and working

A. Mid-girth and length

Volume by the quarter-girth (Hoppus) rule or true volume.

Question 9 · medium

Hammer marks on logs in Indian depots are used to:

  1. Measure the moisture content of logs
  2. Test for decay
  3. Treat logs
  4. Mark property and identify lots
Answer and working

D. Mark property and identify lots

They identify ownership and legality.

Question 10 · easy

Culverts at stream crossings must be sized mainly for:

  1. The average dry-season flow
  2. The design flood and debris
  3. The width of the road only
  4. The colour of the water
Answer and working

B. The design flood and debris

Undersized culverts block and wash out.

A study plan for Forest Operations, Harvesting & Forest Engineering in Indian Forest Service Examination

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (39% of the 41 questions): Ergonomics and occupational safety in forest work (4, 10%); Extraction: skidding, forwarding, cable logging, animal and aerial extraction (4, 10%); Felling: manual, motor-manual and mechanised; directional felling (4, 10%); Forest road planning, location and grades (4, 10%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Harvesting systems: cut-to-length and whole-tree (4, 10%); Reduced-impact logging and soil protection (4, 10%); Chainsaw use and safety (3, 7%); Forest bridges and simple structures (3, 7%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Log scaling, sorting and landing operations (3, 7%); Road construction, drainage and maintenance (3, 7%); Timber transport: road, water, rail (3, 7%); Harvest planning and layout (2, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Felling: manual, motor-manual and mechanised; directional felling (2 hard of 4), Harvest planning and layout (1 hard of 2), Chainsaw use and safety (1 hard of 3).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Harvest planning and layout (1 easy of 2); Forest bridges and simple structures (1 easy of 3).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Indian Forest Service Examination Forest Operations, Harvesting & Forest Engineering

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.