Indian Forest Service Examination Wood Anatomy & Wood Properties: practice questions
Indian Forest Service Examination (IFoS) — Forestry optional · India · Union Public Service Commission
Original practice questions written to the published syllabus · not past papers
10worked here, free
40written to this exam in this subject
11syllabus units
About Indian Forest Service Examination
Indian Forest Service Examination (IFoS) — Forestry optional is a government recruitment exam run by Union Public Service Commission, for candidates in India. Three stages: the Civil Services (Preliminary) Examination as a screening test; a written Main examination of six conventional papers (General English 300, General Knowledge 300, and two optional subjects of two papers each at 200 marks, 1,400 in all); and a 300-mark personality test.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Wood Anatomy & Wood Properties in Indian Forest Service Examination
The structure of wood and how it determines strength, density, durability and use: macroscopic and microscopic identification of timbers and their physical and mechanical properties.
Our 40 Indian Forest Service Examination questions in this subject: 6 easy, 21 medium, 13 hard, across 11 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to Indian Forest Service Examination and are not shown on any other exam's page.
Question 1 · hard
Cross-field pits in softwoods connect:
Vessels to fibres in hardwood latewood
Resin canals to bark
Ray parenchyma to axial tracheids
Earlywood to latewood
Answer and working
C. Ray parenchyma to axial tracheids
Their shapes (window-like, pinoid, piceoid, cupressoid, taxodioid) aid identification.
Question 2 · medium
Extractives in wood can affect:
Colour, durability, gluing and finishing
Only the weight of the wood when dry
Nothing in service
Only the bark
Answer and working
A. Colour, durability, gluing and finishing
Some also cause dermatitis in workers.
Question 3 · easy
A wood with basic density 600 kg/m³ has basic specific gravity of:
6.0
60
0.6
0.06
Answer and working
C. 0.6
Specific gravity = density ÷ density of water (1000 kg/m³).
Question 4 · hard
A quarter-sawn board shrinks less in width than a flat-sawn board because its width is:
Radial
Tangential
Longitudinal
Diagonal to the rings at 45°
Answer and working
A. Radial
Radial shrinkage is about half tangential.
Question 5 · medium
Compression perpendicular to the grain is important where:
Wood is used as a tension tie in a roof truss
Beams rest on supports or rails on sleepers
Wood is used for paper
Wood is burned as fuel
Answer and working
B. Beams rest on supports or rails on sleepers
Bearing areas crush under concentrated load.
Question 6 · medium
Tension wood is characterised by:
Rounded tracheids with high lignin
Gelatinous fibres with a G-layer
Resin canals
Absence of cellulose
Answer and working
B. Gelatinous fibres with a G-layer
The G-layer is cellulose-rich; tension wood gives woolly sawn surfaces.
Question 7 · hard
Interlocked grain, common in dipterocarps and some eucalypts, causes:
Easy splitting along the grain with an axe
No effect on machining
Tearing in planing but attractive ribbon figure
Twisting of every board
Answer and working
C. Tearing in planing but attractive ribbon figure
Alternating spiral direction resists splitting and gives ribbon figure on quarter-sawn faces.
Question 8 · easy
In EN 338, the D classes are strength classes for:
Softwoods
Hardwoods
Bamboo
Plywood
Answer and working
B. Hardwoods
C classes are for softwoods.
Question 9 · hard
Fast-grown plantation teak may differ from natural teak in that its heartwood can be:
Always more durable
Free of extractives entirely
Composed only of sapwood
Less durable
Answer and working
D. Less durable
Durability varies with growth conditions and tree age.
Question 10 · medium
Which of these is a perishable timber needing treatment for exterior use?
Teak
Sal
Mango
Deodar
Answer and working
C. Mango
Mango, semul and poplar are non-durable.
A study plan for Wood Anatomy & Wood Properties in Indian Forest Service Examination
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (43% of the 40 questions): Mechanical properties: bending, compression, hardness (5, 13%); Cell wall structure and chemical composition (4, 10%); Hardwood structure: vessels, fibres, parenchyma; ring-porous and diffuse-porous (4, 10%); Macroscopic and microscopic identification of timbers (4, 10%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Timber grading and the uses of important timbers (4, 10%); Wood-water relations: moisture content, fibre saturation point, shrinkage (4, 10%); Formation of wood: cambium, sapwood and heartwood (3, 8%); Natural defects and reaction wood (3, 8%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Natural durability of timbers (3, 8%); Softwood structure: tracheids, rays, resin canals (3, 8%); Wood density and specific gravity (3, 8%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Hardwood structure: vessels, fibres, parenchyma; ring-porous and diffuse-porous (2 hard of 4), Wood-water relations: moisture content, fibre saturation point, shrinkage (2 hard of 4), Formation of wood: cambium, sapwood and heartwood (1 hard of 3).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Cell wall structure and chemical composition (2 easy of 4); Natural durability of timbers (1 easy of 3).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.