Indian Forest Service Examination Wood Seasoning, Preservation & Protection: practice questions
Indian Forest Service Examination (IFoS) — Forestry optional · India · Union Public Service Commission
Original practice questions written to the published syllabus · not past papers
10worked here, free
43written to this exam in this subject
12syllabus units
About Indian Forest Service Examination
Indian Forest Service Examination (IFoS) — Forestry optional is a government recruitment exam run by Union Public Service Commission, for candidates in India. Three stages: the Civil Services (Preliminary) Examination as a screening test; a written Main examination of six conventional papers (General English 300, General Knowledge 300, and two optional subjects of two papers each at 200 marks, 1,400 in all); and a 300-mark personality test.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Wood Seasoning, Preservation & Protection in Indian Forest Service Examination
Drying timber without defects and protecting it from decay, insects and fire, by chemical, biological and modified-wood methods.
Our 43 Indian Forest Service Examination questions in this subject: 9 easy, 22 medium, 12 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to Indian Forest Service Examination and are not shown on any other exam's page.
Question 1 · medium
Air seasoning cannot reduce moisture content below:
The fibre saturation point of the wood being dried
The outdoor equilibrium moisture content
Zero percent in dry weather
Half the green moisture content
Answer and working
B. The outdoor equilibrium moisture content
Wood comes to equilibrium with outdoor air, often about 12–18% in India.
Question 2 · medium
Kiln samples are used to:
Grade timber by its appearance and colour
Test preservative penetration
Measure fire resistance
Track the moisture content of a charge
Answer and working
D. Track the moisture content of a charge
They are weighed regularly and oven-dried for MC.
Question 3 · medium
Casehardening is detected by:
The Janka test
A spot test for copper
The prong test
A graveyard test
Answer and working
C. The prong test
Prongs bending inward or outward reveal stresses.
Question 4 · medium
Honeycombing is:
Surface checking on the wide face
Internal checking inside the wood
Insect holes
Splits at the ends
Answer and working
B. Internal checking inside the wood
Often invisible on the surface; caused by severe late-stage drying.
Question 5 · hard
Surface checks in drying form mainly because:
The core shrinks before the surface does
Longitudinal shrinkage is very large
The surface dries and shrinks before the core
Free water expands on drying
Answer and working
C. The surface dries and shrinks before the core
The restrained surface fails in tension perpendicular to the grain.
Question 6 · medium
Teak was traditionally girdled before felling mainly to:
Increase growth before the final felling
Make the wood heavier
Prevent all insect attack
Dry the stem partly and let logs float
Answer and working
D. Dry the stem partly and let logs float
Girdling two to three years before felling reduced weight and seasoning time.
Question 7 · medium
The Rueping process begins with:
An initial vacuum, as in the Bethell process
Soaking for a week
No pressure at all
Initial air pressure on the wood
Answer and working
D. Initial air pressure on the wood
Compressed air later expels excess preservative.
Question 8 · medium
Why must the Boucherie process be applied soon after felling?
Air soon blocks the cells
Bark falls off within an hour of felling
Preservative cannot enter green wood
Logs freeze solid soon after felling
Answer and working
A. Air soon blocks the cells
Fresh sapwood is continuous and water-filled.
Question 9 · hard
Natural products such as neem oil and chitosan for wood protection are generally:
More effective than all conventional preservatives
Promising but less effective in severe hazards
Banned in all countries
Only useful against marine borers
Answer and working
B. Promising but less effective in severe hazards
They need standard testing before use.
Question 10 · medium
Bunded storage at treatment plants is meant to:
Increase treatment pressure
Dry wood faster
Contain spills of chemicals
Display products
Answer and working
C. Contain spills of chemicals
Bunds prevent spills reaching soil and water.
A study plan for Wood Seasoning, Preservation & Protection in Indian Forest Service Examination
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (37% of the 43 questions): Biological and environmentally safer preservation; modified wood (4, 9%); Fire retardants (4, 9%); Preservatives: oil-type, water-borne, organic solvent (4, 9%); Retention, penetration and treatment standards (4, 9%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Sap-displacement and diffusion methods (4, 9%); Seasoning defects and their control (4, 9%); Treatment methods: non-pressure and pressure (full-cell, empty-cell) (4, 9%); Wood-destroying agents: fungi, insects, marine borers (4, 9%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Kiln seasoning: kiln types and schedules (3, 7%); Safety and environmental rules on preservatives (3, 7%); Solar and other low-cost seasoning (3, 7%); Air seasoning (2, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Air seasoning (1 hard of 2), Kiln seasoning: kiln types and schedules (1 hard of 3), Safety and environmental rules on preservatives (1 hard of 3).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Wood-destroying agents: fungi, insects, marine borers (2 easy of 4); Safety and environmental rules on preservatives (1 easy of 3).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.