LAISHA
Open Laisha

Indian Forest Service Examination Forest Surveying & Mapping: practice questions

Indian Forest Service Examination (IFoS) — Forestry optional · India · Union Public Service Commission

Original practice questions written to the published syllabus · not past papers
10worked here, free
44written to this exam in this subject
9syllabus units

About Indian Forest Service Examination

Indian Forest Service Examination (IFoS) — Forestry optional is a government recruitment exam run by Union Public Service Commission, for candidates in India. Three stages: the Civil Services (Preliminary) Examination as a screening test; a written Main examination of six conventional papers (General English 300, General Knowledge 300, and two optional subjects of two papers each at 200 marks, 1,400 in all); and a 300-mark personality test.

Official site: upsc.gov.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Forest Surveying & Mapping in Indian Forest Service Examination

Measuring and mapping forest land: chain, compass and plane-table survey, levelling and contouring, area computation, GNSS and the reading of topographic maps. General surveying is covered in the Agricultural Engineering track (surveying-levelling); this subject applies it to forest boundaries and compartments.

Our 44 Indian Forest Service Examination questions in this subject: 2 easy, 26 medium, 16 hard, across 9 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Indian Forest Service Examination and are not shown on any other exam's page.

Question 1 · medium

A steel tape standardised at 20 °C measures 100 m at 35 °C. With α = 11.6 × 10⁻⁶ per °C, what is the temperature correction?

  1. +17.4 mm
  2. −17.4 mm
  3. +1.7 mm
  4. +174 mm
Answer and working

A. +17.4 mm

α(T − T₀)L = 11.6 × 10⁻⁶ × 15 × 100 m = 0.0174 m = 17.4 mm, added because the tape has expanded and reads short.

Question 2 · medium

In chain triangulation, a well-conditioned triangle has no angle smaller than about:

  1. 5°
  2. 60°
  3. 90°
  4. 30°
Answer and working

D. 30°

Angles between about 30° and 120° keep small length errors from distorting shape.

Question 3 · medium

A closed compass traverse of perimeter 1000 m has ΣL = +1.2 m and ΣD = −1.6 m. What are the closing error and relative precision?

  1. 2.8 m; 1 in 357
  2. 0.4 m; 1 in 2500
  3. 2.0 m; 1 in 500
  4. 2.0 m; 1 in 50
Answer and working

C. 2.0 m; 1 in 500

√(1.2² + 1.6²) = 2.0 m; 2/1000 = 1 in 500. 2.8 adds the components directly.

Question 4 · medium

Fore and back bearings of a line differ by 172° instead of 180°. The most likely cause is:

  1. Wrong magnetic declination
  2. Slope of the ground
  3. Incorrect chain length
  4. Local attraction
Answer and working

D. Local attraction

Local attraction from iron or magnetic rock deflects the needle at one station; declination affects both bearings equally.

Question 5 · medium

Locating the position of the plane-table station itself from sightings to three plotted points is the:

  1. Two-point intersection problem
  2. Radiation method
  3. Reciprocal ranging method
  4. Three-point resection problem
Answer and working

D. Three-point resection problem

Resection with three visible points; Lehmann's rules guide the trial-and-error solution.

Question 6 · hard

At small mapping scales, which plane-table setup error matters least?

  1. Orientation
  2. Levelling
  3. Alidade edge straightness
  4. Centring
Answer and working

D. Centring

A small centring displacement is invisible at small scale, whereas orientation errors rotate every ray.

Question 7 · medium

For the same offsets (0, 4, 6, 5, 0 m at 10 m), what area does Simpson's rule give?

  1. 150 m²
  2. 160 m²
  3. 180 m²
  4. 120 m²
Answer and working

B. 160 m²

(10/3) × [(0 + 0) + 4(4 + 5) + 2(6)] = (10/3) × 48 = 160 m².

Question 8 · medium

Why does a graphic scale bar remain useful when a map is photocopied at a different size?

  1. It changes size with the map
  2. It is printed in a fixed colour
  3. It shows the datum
  4. It records the edition date
Answer and working

A. It changes size with the map

A representative fraction becomes wrong when the map is enlarged or reduced; the bar scales with it.

Question 9 · hard

A boundary register records for each pillar its number, coordinates, bearing and distance to the next pillar, and condition. Its main purpose is to:

  1. Calculate timber volume along the boundary
  2. To relocate pillars and prove encroachment
  3. Record the age of trees near each pillar
  4. Replace the legal notification
Answer and working

B. To relocate pillars and prove encroachment

Accurate records allow pillars to be re-established and support enforcement.

Question 10 · medium

Which datum is used by GPS?

  1. OSGB36
  2. WGS 84
  3. NAD27
  4. Everest 1830
Answer and working

B. WGS 84

WGS 84 is a global Earth-centred datum; the others are older local datums.

A study plan for Forest Surveying & Mapping in Indian Forest Service Examination

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (41% of the 44 questions): Compass survey: bearings, declination, closing error (6, 14%); Levelling and contouring (6, 14%); National mapping agencies and systems (6, 14%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Chain and tape survey (5, 11%); Computation of areas and volumes (5, 11%); Demarcation of forest boundaries and compartments (5, 11%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Plane-table survey (5, 11%); Topographic maps and map reading (5, 11%); GNSS in forest survey and its accuracy under canopy (1, 2%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: GNSS in forest survey and its accuracy under canopy (1 hard of 1), Computation of areas and volumes (2 hard of 5), Demarcation of forest boundaries and compartments (2 hard of 5).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Chain and tape survey (1 easy of 5); National mapping agencies and systems (1 easy of 6).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Indian Forest Service Examination Forest Surveying & Mapping

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.