Range Forest Officer recruitment Wood Anatomy & Wood Properties: practice questions
Range Forest Officer recruitment (state exams) · India · State Public Service Commissions and state forest departments (e.g. MPPSC, UKPSC, UPPSC)
Original practice questions written to the published syllabus · not past papers
10worked here, free
38written to this exam in this subject
11syllabus units
About Range Forest Officer recruitment
Range Forest Officer recruitment (state exams) is a government recruitment exam run by State Public Service Commissions and state forest departments (e.g. MPPSC, UKPSC, UPPSC), for candidates in India. Usually objective and/or descriptive papers in general studies and forestry or science, with physical tests and an interview in some states.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Wood Anatomy & Wood Properties in Range Forest Officer recruitment
The structure of wood and how it determines strength, density, durability and use: macroscopic and microscopic identification of timbers and their physical and mechanical properties.
Our 38 Range Forest Officer recruitment questions in this subject: 18 easy, 20 medium, 0 hard, across 11 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to Range Forest Officer recruitment and are not shown on any other exam's page.
Question 1 · medium
Fusiform initials of the cambium give rise to:
Ray cells running radially across the wood
Cork cells of the outer bark
Root hairs in the soil
Axial, longitudinal cells
Answer and working
D. Axial, longitudinal cells
Ray initials produce rays.
Question 2 · medium
In softwood heartwood, permeability is reduced mainly by:
Tyloses in vessels
Open resin canals
Enlarged rays
Aspirated pits
Answer and working
D. Aspirated pits
The torus seals bordered pits; softwoods have no vessels.
Question 3 · medium
Under a hand lens, the first feature separating softwoods from hardwoods is:
Presence of growth rings in the wood
Colour of the heartwood under daylight
Presence of rays visible on end grain
No pores
Answer and working
D. No pores
Softwoods are non-porous; hardwoods have vessels seen as pores.
Question 4 · medium
Sal and other dipterocarps can be recognised partly by:
Absence of vessels, as in conifers
Axial intercellular canals in tangential lines
Very wide rays like oak
Ring-porous vessel bands
Answer and working
B. Axial intercellular canals in tangential lines
Dipterocarps have axial resin canals.
Question 5 · medium
Texture of wood refers mainly to:
The size of pores and cells
The direction of fibres relative to the axis
The colour of heartwood
The odour of fresh wood
Answer and working
A. The size of pores and cells
Grain refers to fibre direction; figure to surface pattern.
Question 6 · easy
MOE (modulus of elasticity) is a measure of:
Hardness
Durability
Stiffness
Colour
Answer and working
C. Stiffness
MOR measures bending strength.
Question 7 · medium
Knots formed after a branch has died, which may fall out of boards, are:
Encased (dead) knots
Intergrown (live) knots
Pin knots
Spike knots
Answer and working
A. Encased (dead) knots
Intergrown knots are continuous with stem wood.
Question 8 · easy
Machine stress grading measures mainly:
Colour of the board surface
Odour of freshly cut wood
Stiffness, or MOE
Number of growth rings per cm
Answer and working
C. Stiffness, or MOE
MOE correlates with strength and is measured non-destructively.
Question 9 · medium
A timber sample weighs 150 g when green and 100 g oven-dry. Its moisture content on oven-dry basis is:
50%
150%
100%
33%
Answer and working
A. 50%
MC = (green − oven-dry) ÷ oven-dry × 100 = 50 ÷ 100 × 100 = 50%. Foresters use the oven-dry basis, so moisture content can exceed 100% in very wet woods.
Question 10 · medium
Compression wood in conifers forms on the:
Centre of the stem
Upper side
Roots only
Lower side of leaning stems
Answer and working
D. Lower side of leaning stems
Conifers form compression wood (dense, high-lignin tracheids) on the lower side; hardwoods form tension wood on the upper side. Both cause warping and abnormal shrinkage.
A study plan for Wood Anatomy & Wood Properties in Range Forest Officer recruitment
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (45% of the 38 questions): Wood-water relations: moisture content, fibre saturation point, shrinkage (5, 13%); Hardwood structure: vessels, fibres, parenchyma; ring-porous and diffuse-porous (4, 11%); Natural defects and reaction wood (4, 11%); Natural durability of timbers (4, 11%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Timber grading and the uses of important timbers (4, 11%); Cell wall structure and chemical composition (3, 8%); Formation of wood: cambium, sapwood and heartwood (3, 8%); Macroscopic and microscopic identification of timbers (3, 8%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Softwood structure: tracheids, rays, resin canals (3, 8%); Wood density and specific gravity (3, 8%); Mechanical properties: bending, compression, hardness (2, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Bank the easy marks: Wood density and specific gravity (3 easy of 3); Natural durability of timbers (3 easy of 4).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.