LAISHA
Open Laisha

Range Forest Officer recruitment Forest Mensuration: practice questions

Range Forest Officer recruitment (state exams) · India · State Public Service Commissions and state forest departments (e.g. MPPSC, UKPSC, UPPSC)

Original practice questions written to the published syllabus · not past papers
10worked here, free
58written to this exam in this subject
13syllabus units

About Range Forest Officer recruitment

Range Forest Officer recruitment (state exams) is a government recruitment exam run by State Public Service Commissions and state forest departments (e.g. MPPSC, UKPSC, UPPSC), for candidates in India. Usually objective and/or descriptive papers in general studies and forestry or science, with physical tests and an interview in some states.

Official site: mppsc.mp.gov.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Forest Mensuration in Range Forest Officer recruitment

Measuring single trees, logs and stands: diameter, height, form, volume, biomass and growth, with the instruments and formulas used in the field.

Our 58 Range Forest Officer recruitment questions in this subject: 32 easy, 24 medium, 2 hard, across 13 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Range Forest Officer recruitment and are not shown on any other exam's page.

Question 1 · medium

From a point 25 m (horizontal) from a tree, the angle to the top is 40° above horizontal and to the base 5° below. What is the height?

  1. 23.2 m
  2. 18.8 m
  3. 21.0 m
  4. 18.2 m
Answer and working

A. 23.2 m

H = D(tan α + tan β) = 25 × (tan 40° + tan 5°) = 25 × (0.8391 + 0.0875) = 23.2 m. Subtracting the tangents gives 18.8 m and is used only when both readings are on the same side of the horizontal; using sines in place of tangents gives 18.2 m.

Question 2 · medium

A 6-m log has diameters of 40 cm at the base, 34 cm at the middle and 30 cm at the top. What is its volume by Newton's formula?

  1. 0.560 m³
  2. 0.589 m³
  3. 0.545 m³
  4. 0.574 m³
Answer and working

A. 0.560 m³

Newton: V = (g_b + 4g_m + g_t)/6 × L = (0.12566 + 4 × 0.09079 + 0.07069)/6 × 6 = 0.560 m³. Smalian gives 0.589 m³ and Huber 0.545 m³; a plain average of the three areas (0.574 m³) omits Newton's weight of 4 on the mid-section.

Question 3 · medium

Why is Smalian's formula the one most used to scale logs on a landing or in a stack?

  1. It is exact for butt logs, which make up most of the logs in a stack
  2. It needs only the two end diameters
  3. It needs only the mid-diameter, which is easiest to reach in a pile
  4. It needs no length measurement at all, unlike Huber's and Newton's formulas
Answer and working

B. It needs only the two end diameters

Log ends are accessible in a stack while mid-points are often buried, so Smalian is practical. It is not exact for butt logs — it overestimates neiloid-shaped butts most — and like all three formulas it needs the length. Those ends are visible on stacked logs.

Question 4 · easy

A volume table entered with dbh alone is called a:

  1. General (two-entry) volume table
  2. Form-class (three-entry) volume table
  3. Local (one-entry) table
  4. Yield table for a normal stand
Answer and working

C. Local (one-entry) table

Local tables give volume from dbh only and are valid where the height-diameter relationship matches the construction data. General tables add height; form-class tables add form class. A yield table gives stand values by age and site.

Question 5 · easy

For young pines that produce one branch whorl each year, a quick estimate of age is obtained by:

  1. Measuring the crown width and dividing by a growth constant
  2. Counting the needles on the leading shoot
  3. Measuring dbh and dividing by 2
  4. Counting the branch whorls or whorl scars along the stem
Answer and working

D. Counting the branch whorls or whorl scars along the stem

Many young pines and spruces form one whorl of branches per year, so whorl counts give age. The method fails in species with several flushes per year and in old trees where lower whorls are lost.

Question 6 · medium

The main product of stem analysis used in site-quality work is:

  1. A height-age curve built from the ages at which the stem reached each disc
  2. A single measurement of the tree's present total stem volume
  3. The bark thickness profile from the stump up to the tip
  4. The number of live and dead branches per metre of stem
Answer and working

A. A height-age curve built from the ages at which the stem reached each disc

Stem analysis gives the age at which the tree reached each sampled height; plotting heights against these ages gives the tree's height-growth history, the raw material of site-index curves.

Question 7 · easy

A stand had 165 m³/ha at 30 years and 240 m³/ha at 40 years. What was its periodic annual increment between those ages?

  1. 6.0 m³/ha/yr
  2. 7.5 m³/ha/yr
  3. 5.5 m³/ha/yr
  4. 75 m³/ha/yr
Answer and working

B. 7.5 m³/ha/yr

PAI = (240 − 165) / 10 = 7.5 m³/ha/yr. 6.0 is the MAI at 40 (240 / 40) and 5.5 the MAI at 30 (165 / 30); 75 is the total periodic increment, not per year.

Question 8 · easy

A stand had 165 m³/ha at 30 years and 240 m³/ha at 40 years. What was its periodic annual increment between those ages?

  1. 6.0 m³/ha/yr
  2. 7.5 m³/ha/yr
  3. 5.5 m³/ha/yr
  4. 75 m³/ha/yr
Answer and working

B. 7.5 m³/ha/yr

PAI = (240 − 165) / 10 = 7.5 m³/ha/yr. 6.0 is the MAI at 40 (240 / 40) and 5.5 the MAI at 30 (165 / 30); 75 is the total periodic increment, not per year.

Question 9 · easy

In Indian and British yield tables, Site Quality I denotes:

  1. The poorest (least productive) site
  2. An average site for the species
  3. A site not yet assessed
  4. The best, most productive site
Answer and working

D. The best, most productive site

In these conventions quality classes run from I (best) downwards; classes are defined by ranges of top height at given ages.

Question 10 · easy

In Indian and British yield tables, Site Quality I denotes:

  1. The poorest (least productive) site
  2. An average site for the species
  3. A site not yet assessed
  4. The best, most productive site
Answer and working

D. The best, most productive site

In these conventions quality classes run from I (best) downwards; classes are defined by ranges of top height at given ages.

A study plan for Forest Mensuration in Range Forest Officer recruitment

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (50% of the 58 questions): Log volume formulas: Huber, Smalian, Newton (7, 12%); Growth and increment: CAI, MAI and their relationship (6, 10%); Stand measurement: stems per hectare, basal area, top height, stand volume (6, 10%); Age determination and stem analysis (5, 9%); Basal area and its uses (5, 9%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Diameter and girth measurement: breast height conventions, calipers, tapes (5, 9%); Height measurement: principles and hypsometers (5, 9%); Volume of standing trees: form factor and form quotient (5, 9%); Site index and site quality curves (4, 7%); Angle-count (Bitterlich) sampling and relascopes (3, 5%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Bark thickness and crown measurements (3, 5%); Volume tables: local, general and form-class; construction and use (3, 5%); Tree biomass and allometric equations (1, 2%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Angle-count (Bitterlich) sampling and relascopes (1 hard of 3), Volume tables: local, general and form-class; construction and use (1 hard of 3).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Bark thickness and crown measurements (3 easy of 3); Tree biomass and allometric equations (1 easy of 1).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Range Forest Officer recruitment Forest Mensuration

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.