Range Forest Officer recruitment Wood Products & Forest-Based Industries: practice questions
Range Forest Officer recruitment (state exams) · India · State Public Service Commissions and state forest departments (e.g. MPPSC, UKPSC, UPPSC)
Original practice questions written to the published syllabus · not past papers
10worked here, free
28written to this exam in this subject
10syllabus units
About Range Forest Officer recruitment
Range Forest Officer recruitment (state exams) is a government recruitment exam run by State Public Service Commissions and state forest departments (e.g. MPPSC, UKPSC, UPPSC), for candidates in India. Usually objective and/or descriptive papers in general studies and forestry or science, with physical tests and an interview in some states.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Wood Products & Forest-Based Industries in Range Forest Officer recruitment
Turning wood into products: sawmilling, veneer and plywood, panels and engineered wood, pulp and paper, wood energy and the chemistry of wood-based industries.
Our 28 Range Forest Officer recruitment questions in this subject: 12 easy, 16 medium, 0 hard, across 10 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to Range Forest Officer recruitment and are not shown on any other exam's page.
Question 1 · easy
Plywood has an odd number of plies mainly so that:
It uses less glue
It stays flat and balanced
It is cheaper to press
It can be peeled more easily
Answer and working
B. It stays flat and balanced
Symmetry about the centre prevents warping.
Question 2 · medium
Decorative face veneers with figure similar to sawn wood are produced by:
Slicing flitches
Rotary peeling on a lathe
Chipping
Refining
Answer and working
A. Slicing flitches
Rotary peeling gives continuous sheets for plywood cores.
Question 3 · easy
A kraft mill pulps 1000 kg of oven-dry wood at 48% yield. How much pulp does it produce?
520 kg
4800 kg
480 kg
48 kg
Answer and working
C. 480 kg
1000 × 0.48 = 480 kg. 520 kg is the dissolved fraction.
Question 4 · medium
ECF bleaching uses:
Elemental chlorine
Sulphur dioxide
Sodium sulphide
Chlorine dioxide
Answer and working
D. Chlorine dioxide
TCF uses oxygen, peroxide and ozone.
Question 5 · medium
A traditional earth kiln converts 15% of 1000 kg of dry wood into charcoal. How much charcoal is produced?
850 kg
15 kg
1500 kg
150 kg
Answer and working
D. 150 kg
1000 × 0.15 = 150 kg. Improved kilns achieve about 25–30% or more.
Question 6 · easy
The gross calorific value of oven-dry wood is about:
2–3 MJ/kg
18–20 MJ/kg
45–50 MJ/kg
100 MJ/kg
Answer and working
B. 18–20 MJ/kg
Similar across species; moisture reduces useful energy.
Question 7 · medium
Sandalwood oil is extracted from:
Leaves and twigs
Bark
Heartwood
Sapwood
Answer and working
C. Heartwood
The fragrant oil is concentrated in heartwood and roots.
Question 8 · easy
The European design code for timber structures is:
Eurocode 2
Eurocode 5
Eurocode 3
Eurocode 8
Answer and working
B. Eurocode 5
EN 1995; Eurocode 2 is concrete, 3 steel, 8 seismic.
Question 9 · easy
Chain of custody tracks wood:
From forest to final consumer
Only inside the sawmill gates
Only during felling
Only in shipping
Answer and working
A. From forest to final consumer
It verifies claims about origin.
Question 10 · medium
VRIKSH is a timber legality certification scheme for:
Brazilian loggers in the Amazon
Indian handicraft exporters
Canadian pulp mills
European retailers
Answer and working
B. Indian handicraft exporters
Operated by the Export Promotion Council for Handicrafts.
A study plan for Wood Products & Forest-Based Industries in Range Forest Officer recruitment
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (46% of the 28 questions): Wood energy: fuelwood, charcoal, pellets (4, 14%); Particleboard, fibreboard (MDF) and oriented strand board (3, 11%); Pulp and paper: raw materials, pulping processes (3, 11%); Sawmilling and recovery (3, 11%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Timber in construction and its standards (3, 11%); Veneer and plywood manufacture (3, 11%); Wood-based industries: raw-material supply and residues (3, 11%); Chain of custody and legality in wood supply (2, 7%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Engineered wood: glulam, LVL, cross-laminated timber (2, 7%); Wood chemistry and extractives (2, 7%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Bank the easy marks: Pulp and paper: raw materials, pulping processes (2 easy of 3); Wood energy: fuelwood, charcoal, pellets (2 easy of 4).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.