ICAR AICE-JRF/SRF Wood Products & Forest-Based Industries: practice questions
ICAR AICE-JRF/SRF (PhD) — Subject 59 Forestry · India · National Testing Agency for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
32written to this exam in this subject
10syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD) — Subject 59 Forestry is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. Computer-based, 2 hours, 120 MCQs (Part A 20 general; Part B 50 core group; Part C 50 subject), +4 / −1, maximum 480.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Wood Products & Forest-Based Industries in ICAR AICE-JRF/SRF
MCQs on manufacturing and utilization of timber and composite wood: sawmilling, plywood, panels, engineered wood, pulp and paper.
Turning wood into products: sawmilling, veneer and plywood, panels and engineered wood, pulp and paper, wood energy and the chemistry of wood-based industries.
Our 32 ICAR AICE-JRF/SRF questions in this subject: 1 easy, 9 medium, 22 hard, across 10 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · medium
Small-diameter logs generally give lower recovery mainly because:
They contain more heartwood than large logs
Slab and edging losses are proportionally larger
Saws cut them more slowly than large logs
They have no bark
Answer and working
B. Slab and edging losses are proportionally larger
The outer, rounded part forms a bigger share of a small log.
Question 2 · hard
Mjøstårnet in Norway, completed in 2019, is notable as:
A concrete gravity dam on a fjord
A tall mass timber building
A steel suspension bridge near Oslo
A pulp mill using spruce chips
Answer and working
B. A tall mass timber building
It uses glulam, CLT and LVL.
Question 3 · hard
A main advantage of engineered wood from plantation trees is that it:
It removes the need for any adhesives
It is immune to fire in buildings
It disperses defects
It uses only the heartwood of trees
Answer and working
C. It disperses defects
Combining pieces reduces variability.
Question 4 · medium
Mechanical pulps have yields of about:
90–95%
45–55%
20–30%
100%+
Answer and working
A. 90–95%
Lignin is retained; kraft yields about 45–55%.
Question 5 · hard
Paper made from mechanical pulp yellows in light mainly because:
It contains no cellulose
It is bleached with chlorine
It retains lignin
It is made of hardwood only
Answer and working
C. It retains lignin
Lignin degrades and discolours under light.
Question 6 · hard
NSSC semi-chemical pulp is mainly used for:
Corrugating medium
Newsprint for daily papers
Tissue paper
Dissolving pulp
Answer and working
A. Corrugating medium
Intermediate yields suit corrugated board.
Question 7 · medium
About what share of global wood removals is used as fuel, according to FAO?
About 5 per cent
About 90%
About half
None
Answer and working
C. About half
Mostly in developing countries.
Question 8 · hard
Whether wood energy reduces net carbon emissions depends mainly on:
The colour and size of the pellets
The size of the stove used, and nothing else
Source, management and timing
The price of oil only, in each year
Answer and working
C. Source, management and timing
Residues and sustainably managed sources are generally more favourable.
Question 9 · medium
Tall oil is a by-product of:
Sulphite pulping of birch
Kraft pulping of pines
Charcoal making
Plywood pressing
Answer and working
B. Kraft pulping of pines
Crude tall oil is refined into fatty acids and rosin.
Question 10 · medium
Contract farming between paper mills and farmers mainly provides:
Assured raw material and buy-back for farmers
Free land given to the mills by farmers
Tax exemptions for forests
Natural forest logging rights
Answer and working
A. Assured raw material and buy-back for farmers
Mills supply seedlings and buy back wood at agreed terms.
A study plan for Wood Products & Forest-Based Industries in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (44% of the 32 questions): Pulp and paper: raw materials, pulping processes (4, 13%); Veneer and plywood manufacture (4, 13%); Chain of custody and legality in wood supply (3, 9%); Engineered wood: glulam, LVL, cross-laminated timber (3, 9%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Particleboard, fibreboard (MDF) and oriented strand board (3, 9%); Sawmilling and recovery (3, 9%); Timber in construction and its standards (3, 9%); Wood chemistry and extractives (3, 9%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Wood energy: fuelwood, charcoal, pellets (3, 9%); Wood-based industries: raw-material supply and residues (3, 9%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Pulp and paper: raw materials, pulping processes (3 hard of 4), Veneer and plywood manufacture (3 hard of 4), Chain of custody and legality in wood supply (2 hard of 3).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Particleboard, fibreboard (MDF) and oriented strand board (1 easy of 3).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.