LAISHA
Open Laisha

NCEES FE Environmental Mathematics & Statistics for Environmental Science: practice questions

NCEES FE Environmental · USA · National Council of Examiners for Engineering and Surveying

Original practice questions written to the published syllabus · not past papers
10worked here, free
30written to this exam in this subject
6syllabus units

About NCEES FE Environmental

NCEES FE Environmental is a licensing and registration exam run by National Council of Examiners for Engineering and Surveying, for candidates in USA. Computer-based at Pearson VUE, 110 questions, 6-hour appointment (5 h 20 min exam time, 25-minute break). Reference handbook supplied on screen.

Source: ncees.org.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Mathematics & Statistics for Environmental Science in NCEES FE Environmental

The mathematics and statistics needed for every numerical question in this track: calculus and differential equations for growth and decay, probability and risk, regression and hypothesis tests, and sampling designs for field data. Experimental design and survey sampling in depth live in the Agricultural Statistics track; this subject covers the environmental applications.

Our 30 NCEES FE Environmental questions in this subject: 9 easy, 13 medium, 8 hard, across 6 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to NCEES FE Environmental and are not shown on any other exam's page.

Question 1 · medium

A square matrix with a determinant of zero is

  1. orthogonal with inverse equal to its transpose
  2. guaranteed to have all eigenvalues positive
  3. singular and has no inverse
  4. always the identity matrix
Answer and working

C. singular and has no inverse

Zero determinant means linearly dependent rows and no inverse; at least one eigenvalue is zero.

Question 2 · easy

What is ∫₀² 3x² dx?

  1. 6
  2. 24
  3. 12
  4. 8
Answer and working

D. 8

∫3x² dx = x³; evaluated from 0 to 2 gives 2³ − 0 = 8. 24 evaluates 3x² × 2 at the upper limit; 12 is the integrand at x = 2.

Question 3 · medium

River flows of 2, 5, 7 and 4 m³/s are measured at hourly intervals. Using the trapezoidal rule, what is the total volume over the 3 hours in (m³/s)·h?

  1. 9
  2. 18
  3. 15
  4. 36
Answer and working

C. 15

(1/2)[2 + 2(5 + 7) + 4] = 15 (m³/s)·h = 54,000 m³. 18 sums all flows; 9 omits doubling interior points; 36 doubles every value.

Question 4 · easy

Which is the derivative of ln x?

  1. 1/x
  2. x
  3. eˣ
  4. ln x/x
Answer and working

A. 1/x

d(ln x)/dx = 1/x for x > 0. eˣ is its own derivative and is the inverse function of ln x, a common confusion; x is the antiderivative-type slip.

Question 5 · hard

Which method solves the linear first-order equation dy/dt + p(t)y = q(t)?

  1. Applying the trapezoidal rule once
  2. Taking the determinant of the coefficient matrix
  3. Multiplying by the integrating factor e^(∫p dt)
  4. Using the characteristic equation am² + bm + c = 0
Answer and working

C. Multiplying by the integrating factor e^(∫p dt)

The integrating factor turns the left side into the derivative of y·e^(∫p dt).

Question 6 · medium

Using the derivative property, L{f′(t)} equals

  1. sF(s) + f(0)
  2. sF(s) − f(0)
  3. F(s)/s
  4. F′(s)
Answer and working

B. sF(s) − f(0)

Differentiation in time becomes multiplication by s minus the initial value.

Question 7 · medium

Solving dC/dt + kC = 0 with C(0) = C0 by Laplace transforms gives C(s) =

  1. C0/(s + k)
  2. C0 s/(s + k)
  3. C0/(s − k)
  4. k/(s + C0)
Answer and working

A. C0/(s + k)

sC − C0 + kC = 0, so C(s) = C0/(s + k), whose inverse is C0e^(−kt).

Question 8 · medium

What is the Laplace transform of sin(at)?

  1. s/(s² + a²)
  2. a/(s² + a²)
  3. 1/(s − a)
  4. a/(s² − a²)
Answer and working

B. a/(s² + a²)

L{sin at} = a/(s² + a²); s/(s² + a²) is cos at.

Question 9 · hard

What is the Laplace transform of t²?

  1. 2/s²
  2. 2/s³
  3. 1/s³
  4. t²/s
Answer and working

B. 2/s³

L{tⁿ} = n!/sⁿ⁺¹; for n = 2 this is 2!/s³ = 2/s³. 2/s² uses sⁿ instead of sⁿ⁺¹, and 1/s³ forgets the factorial.

Question 10 · hard

What is the inverse Laplace transform of 1/(s + 3)?

  1. 3e^(−t)
  2. sin 3t
  3. e^(−3t)
  4. e^(3t)
Answer and working

C. e^(−3t)

From L{e^(at)} = 1/(s − a), 1/(s + 3) has a = −3, so the inverse is e^(−3t), a decaying exponential. e^(3t) misreads the sign; 3e^(−t) swaps the roles of the constant and the exponent.

A study plan for Mathematics & Statistics for Environmental Science in NCEES FE Environmental

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (47% of the 30 questions): Laplace transforms (8, 27%); Calculus: limits, derivatives, maxima and minima, integrals (6, 20%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Ordinary differential equations and first-order decay and growth (6, 20%); Linear algebra: matrices, linear systems, eigenvalues (5, 17%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Risk and reliability; return periods and exceedance probability (4, 13%); Probability distributions: binomial, Poisson, normal, log-normal (1, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Risk and reliability; return periods and exceedance probability (2 hard of 4), Ordinary differential equations and first-order decay and growth (2 hard of 6), Laplace transforms (2 hard of 8).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Calculus: limits, derivatives, maxima and minima, integrals (3 easy of 6); Linear algebra: matrices, linear systems, eigenvalues (2 easy of 5).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — NCEES FE Environmental Mathematics & Statistics for Environmental Science

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.